Executing /etc/qemu-ifup coreboot-3.0.672 Thu May 1 13:24:56 CEST 2008 starting... Choosing fallback boot. LAR: Attempting to open 'fallback/initram/segment0'. LAR: Start 0xfffc0000 len 0x40000 LAR: seen member normal/option_table LAR: seen member normal/initram/segment0 LAR: seen member normal/stage2/segment0 LAR: seen member normal/stage2/segment1 LAR: seen member normal/stage2/segment2 LAR: seen member normal/payload/segment0 LAR: seen member normal/payload/segment1 LAR: seen member normal/payload/segment2 LAR: seen member bootblock LAR: File not found! LAR: Run file fallback/initram/segment0 failed: No such file. Fallback failed. Try normal boot LAR: Attempting to open 'normal/initram/segment0'. LAR: Start 0xfffc0000 len 0x40000 LAR: seen member normal/option_table LAR: seen member normal/initram/segment0 LAR: CHECK normal/initram/segment0 @ 0xfffc0400 start 0xfffc0450 len 432 reallen 432 compression 0 entry 0x00000042 loadaddress 0x00000000 Entry point is 0xfffc0492 RAM init code started. Nothing to do. printktest1: If the immediately preceding line does not say "Nothing to do.", then execution did not start at main() Trying absolute call from non-_MAINOBJECT XIP code. Absolute call successful. Done. run_file returns with 0 Done RAM init code LAR: Attempting to open 'normal/stage2/segment0'. LAR: Start 0xfffc0000 len 0x40000 LAR: seen member normal/option_table LAR: seen member normal/initram/segment0 LAR: seen member normal/stage2/segment0 LAR: CHECK normal/stage2/segment0 @ 0xfffc0600 start 0xfffc0650 len 1 reallen 191680 compression 3 entry 0x00002000 loadaddress 0x0000b23c LAR: Compression algorithm #3 (zeroes) used LAR: Attempting to open 'normal/stage2/segment1'. LAR: Start 0xfffc0000 len 0x40000 LAR: seen member normal/option_table LAR: seen member normal/initram/segment0 LAR: seen member normal/stage2/segment0 LAR: seen member normal/stage2/segment1 LAR: CHECK normal/stage2/segment1 @ 0xfffc0660 start 0xfffc06b0 len 15075 reallen 28128 compression 1 entry 0x00002000 loadaddress 0x00002000 LAR: Compression algorithm #1 (lzma) used LAR: Attempting to open 'normal/stage2/segment2'. LAR: Start 0xfffc0000 len 0x40000 LAR: seen member normal/option_table LAR: seen member normal/initram/segment0 LAR: seen member normal/stage2/segment0 LAR: seen member normal/stage2/segment1 LAR: seen member normal/stage2/segment2 LAR: CHECK normal/stage2/segment2 @ 0xfffc41a0 start 0xfffc41f0 len 336 reallen 5212 compression 1 entry 0x00002000 loadaddress 0x00009de0 LAR: Compression algorithm #1 (lzma) used LAR: Attempting to open 'normal/stage2/segment3'. LAR: Start 0xfffc0000 len 0x40000 LAR: seen member normal/option_table LAR: seen member normal/initram/segment0 LAR: seen member normal/stage2/segment0 LAR: seen member normal/stage2/segment1 LAR: seen member normal/stage2/segment2 LAR: seen member normal/payload/segment0 LAR: seen member normal/payload/segment1 LAR: seen member normal/payload/segment2 LAR: seen member bootblock LAR: File not found! LAR: load_file: No such file 'normal/stage2/segment3' LAR: load_file_segments: All loaded, entry 0x00002000 Phase 1: Very early setup... Phase 1: done Show all devs... root(Root Device): enabled 1 have_resources 0 initialized 0 cpus: Unknown device path type: 0 cpus(): enabled 1 have_resources 0 initialized 0 pci_0_0(PCI: 00:00.0): enabled 1 have_resources 0 initialized 0 pci_1_0(PCI: 00:01.0): enabled 1 have_resources 0 initialized 0 bus_0(PCI_BUS: 0000): enabled 1 have_resources 0 initialized 0 domain_0(PCI_DOMAIN: 0000): enabled 1 have_resources 0 initialized 0 Phase 2: Early setup... dev_phase2: dev root: ops 0x00009de4 ops->phase2_setup_scan_bus 0x00000000 dev_phase2: dev cpus: ops 0x00000000 ops->phase2_setup_scan_bus 0x00000000 dev_phase2: dev pci_0_0: ops 0x00000000 ops->phase2_setup_scan_bus 0x00000000 dev_phase2: dev pci_1_0: ops 0x0000b1a4 ops->phase2_setup_scan_bus 0x00000000 dev_phase2: dev bus_0: ops 0x00000000 ops->phase2_setup_scan_bus 0x00000000 dev_phase2: dev domain_0: ops 0x0000b10c ops->phase2_setup_scan_bus 0x00000000 Phase 2: Done. Show all devs... root(Root Device): enabled 1 have_resources 0 initialized 0 cpus: Unknown device path type: 0 cpus(): enabled 1 have_resources 0 initialized 0 pci_0_0(PCI: 00:00.0): enabled 1 have_resources 0 initialized 0 pci_1_0(PCI: 00:01.0): enabled 1 have_resources 0 initialized 0 bus_0(PCI_BUS: 0000): enabled 1 have_resources 0 initialized 0 domain_0(PCI_DOMAIN: 0000): enabled 1 have_resources 0 initialized 0 Phase 3: Enumerating buses... dev_phase3_scan: scanning root(Root Device) scan_static_bus for root (Root Device) cpus: Unknown device path type: 0 cpus() enabled dev_phase5: bus_0(PCI_BUS: 0000) missing ops domain_0(PCI_DOMAIN: 0000) enabled domain_0(PCI_DOMAIN: 0000) scanning... dev_phase3_scan: scanning domain_0(PCI_DOMAIN: 0000) pci_scan_bus start bus 0x0000a78c, bus->dev 0x0000a54c PCI: pci_scan_bus for bus 00 pci_scan_bus: old_devices 0x0000a838, dev for this bus 0x0000a54c (domain_0) PCI: scan devfn 0x0 to 0xff PCI: devfn 0x0 pci_scan_get_dev: list is 0x0008fed4, *list is 0x0000a838 pci_scan_get_dev: check dev bus_0 pci_scan_get_dev: child bus_0(PCI_BUS: 0000) not a pci device: it's type 3 PCI: pci_scan_bus pci_scan_get_dev returns dev None (no dev in tree yet) new_device: devcnt 1 find_device_operations: check all_device_operations[i] 0x00009f1c find_device_operations: cons 0x00009f1c, cons id PCI: 1013:00b8 find_device_operations: check all_device_operations[i] 0x0000b10c find_device_operations: cons 0x0000b10c, cons id PCI_DOMAIN: 8086:7190 find_device_operations: check all_device_operations[i] 0x0000b1a4 find_device_operations: cons 0x0000b1a4, cons id PCI: 8086:7010 constructor: constructor is 0x00000000 No ops found and no constructor called for PCI: 8086:1237. find_device_operations: check all_device_operations[i] 0x00009f1c find_device_operations: cons 0x00009f1c, cons id PCI: 1013:00b8 find_device_operations: check all_device_operations[i] 0x0000b10c find_device_operations: cons 0x0000b10c, cons id PCI_DOMAIN: 8086:7190 find_device_operations: check all_device_operations[i] 0x0000b1a4 find_device_operations: cons 0x0000b1a4, cons id PCI: 8086:7010 set_pci_ops: dev 0x0000b538(dynamic PCI: 00:00.0) set ops to 0x00009e34 PCI: 00:00.0 [PCI: 8086:1237] enabled PCI: pci_scan_bus pci_probe_dev returns dev 0x0000b538(dynamic PCI: 00:00.0) PCI: devfn 0x8 pci_scan_get_dev: list is 0x0008fed4, *list is 0x0000a838 pci_scan_get_dev: check dev bus_0 pci_scan_get_dev: child bus_0(PCI_BUS: 0000) not a pci device: it's type 3 PCI: pci_scan_bus pci_scan_get_dev returns dev None (no dev in tree yet) new_device: devcnt 2 find_device_operations: check all_device_operations[i] 0x00009f1c find_device_operations: cons 0x00009f1c, cons id PCI: 1013:00b8 find_device_operations: check all_device_operations[i] 0x0000b10c find_device_operations: cons 0x0000b10c, cons id PCI_DOMAIN: 8086:7190 find_device_operations: check all_device_operations[i] 0x0000b1a4 find_device_operations: cons 0x0000b1a4, cons id PCI: 8086:7010 constructor: constructor is 0x00000000 No ops found and no constructor called for PCI: 8086:7000. find_device_operations: check all_device_operations[i] 0x00009f1c find_device_operations: cons 0x00009f1c, cons id PCI: 1013:00b8 find_device_operations: check all_device_operations[i] 0x0000b10c find_device_operations: cons 0x0000b10c, cons id PCI_DOMAIN: 8086:7190 find_device_operations: check all_device_operations[i] 0x0000b1a4 find_device_operations: cons 0x0000b1a4, cons id PCI: 8086:7010 set_pci_ops: dev 0x0000b824(dynamic PCI: 00:01.0) set ops to 0x00009e34 PCI: 00:01.0 [PCI: 8086:7000] enabled PCI: pci_scan_bus pci_probe_dev returns dev 0x0000b824(dynamic PCI: 00:01.0) PCI: devfn 0x9 pci_scan_get_dev: list is 0x0008fed4, *list is 0x0000a838 pci_scan_get_dev: check dev bus_0 pci_scan_get_dev: child bus_0(PCI_BUS: 0000) not a pci device: it's type 3 PCI: pci_scan_bus pci_scan_get_dev returns dev None (no dev in tree yet) new_device: devcnt 3 find_device_operations: check all_device_operations[i] 0x00009f1c find_device_operations: cons 0x00009f1c, cons id PCI: 1013:00b8 find_device_operations: check all_device_operations[i] 0x0000b10c find_device_operations: cons 0x0000b10c, cons id PCI_DOMAIN: 8086:7190 find_device_operations: check all_device_operations[i] 0x0000b1a4 find_device_operations: cons 0x0000b1a4, cons id PCI: 8086:7010 find_device_operations: match constructor: constructor is 0x0000b1a4 default device constructor called set_pci_ops: dev 0x0000bb10(dynamic PCI: 00:01.1) already has ops 0x0000b1a4 PCI: 00:01.1 [PCI: 8086:7010] enabled PCI: pci_scan_bus pci_probe_dev returns dev 0x0000bb10(dynamic PCI: 00:01.1) PCI: devfn 0xa pci_scan_get_dev: list is 0x0008fed4, *list is 0x0000a838 pci_scan_get_dev: check dev bus_0 pci_scan_get_dev: child bus_0(PCI_BUS: 0000) not a pci device: it's type 3 PCI: pci_scan_bus pci_scan_get_dev returns dev None (no dev in tree yet) PCI: devfn 0xa, bad id 0xffffffff PCI: pci_scan_bus pci_probe_dev returns dev 0x00000000(None (not found)) PCI: devfn 0xb pci_scan_get_dev: list is 0x0008fed4, *list is 0x0000a838 pci_scan_get_dev: check dev bus_0 pci_scan_get_dev: child bus_0(PCI_BUS: 0000) not a pci device: it's type 3 PCI: pci_scan_bus pci_scan_get_dev returns dev None (no dev in tree yet) new_device: devcnt 4 find_device_operations: check all_device_operations[i] 0x00009f1c find_device_operations: cons 0x00009f1c, cons id PCI: 1013:00b8 find_device_operations: check all_device_operations[i] 0x0000b10c find_device_operations: cons 0x0000b10c, cons id PCI_DOMAIN: 8086:7190 find_device_operations: check all_device_operations[i] 0x0000b1a4 find_device_operations: cons 0x0000b1a4, cons id PCI: 8086:7010 constructor: constructor is 0x00000000 No ops found and no constructor called for PCI: 8086:7113. find_device_operations: check all_device_operations[i] 0x00009f1c find_device_operations: cons 0x00009f1c, cons id PCI: 1013:00b8 find_device_operations: check all_device_operations[i] 0x0000b10c find_device_operations: cons 0x0000b10c, cons id PCI_DOMAIN: 8086:7190 find_device_operations: check all_device_operations[i] 0x0000b1a4 find_device_operations: cons 0x0000b1a4, cons id PCI: 8086:7010 set_pci_ops: dev 0x0000bdfc(dynamic PCI: 00:01.3) set ops to 0x00009e34 PCI: 00:01.3 [PCI: 8086:7113] enabled PCI: pci_scan_bus pci_probe_dev returns dev 0x0000bdfc(dynamic PCI: 00:01.3) PCI: devfn 0xc pci_scan_get_dev: list is 0x0008fed4, *list is 0x0000a838 pci_scan_get_dev: check dev bus_0 pci_scan_get_dev: child bus_0(PCI_BUS: 0000) not a pci device: it's type 3 PCI: pci_scan_bus pci_scan_get_dev returns dev None (no dev in tree yet) PCI: devfn 0xc, bad id 0xffffffff PCI: pci_scan_bus pci_probe_dev returns dev 0x00000000(None (not found)) PCI: devfn 0xd pci_scan_get_dev: list is 0x0008fed4, *list is 0x0000a838 pci_scan_get_dev: check dev bus_0 pci_scan_get_dev: child bus_0(PCI_BUS: 0000) not a pci device: it's type 3 PCI: pci_scan_bus pci_scan_get_dev returns dev None (no dev in tree yet) PCI: devfn 0xd, bad id 0xffffffff PCI: pci_scan_bus pci_probe_dev returns dev 0x00000000(None (not found)) PCI: devfn 0xe pci_scan_get_dev: list is 0x0008fed4, *list is 0x0000a838 pci_scan_get_dev: check dev bus_0 pci_scan_get_dev: child bus_0(PCI_BUS: 0000) not a pci device: it's type 3 PCI: pci_scan_bus pci_scan_get_dev returns dev None (no dev in tree yet) PCI: devfn 0xe, bad id 0xffffffff PCI: pci_scan_bus pci_probe_dev returns dev 0x00000000(None (not found)) PCI: devfn 0xf pci_scan_get_dev: list is 0x0008fed4, *list is 0x0000a838 pci_scan_get_dev: check dev bus_0 pci_scan_get_dev: child bus_0(PCI_BUS: 0000) not a pci device: it's type 3 PCI: pci_scan_bus pci_scan_get_dev returns dev None (no dev in tree yet) PCI: devfn 0xf, bad id 0xffffffff PCI: pci_scan_bus pci_probe_dev returns dev 0x00000000(None (not found)) PCI: devfn 0x10 pci_scan_get_dev: list is 0x0008fed4, *list is 0x0000a838 pci_scan_get_dev: check dev bus_0 pci_scan_get_dev: child bus_0(PCI_BUS: 0000) not a pci device: it's type 3 PCI: pci_scan_bus pci_scan_get_dev returns dev None (no dev in tree yet) new_device: devcnt 5 find_device_operations: check all_device_operations[i] 0x00009f1c find_device_operations: cons 0x00009f1c, cons id PCI: 1013:00b8 find_device_operations: match constructor: constructor is 0x00009f1c default device constructor called set_pci_ops: dev 0x0000c0e8(dynamic PCI: 00:02.0) already has ops 0x00009f1c Init VGA device PCI: 00:02.0 [PCI: 1013:00b8] enabled PCI: pci_scan_bus pci_probe_dev returns dev 0x0000c0e8(dynamic PCI: 00:02.0) PCI: devfn 0x18 pci_scan_get_dev: list is 0x0008fed4, *list is 0x0000a838 pci_scan_get_dev: check dev bus_0 pci_scan_get_dev: child bus_0(PCI_BUS: 0000) not a pci device: it's type 3 PCI: pci_scan_bus pci_scan_get_dev returns dev None (no dev in tree yet) new_device: devcnt 6 find_device_operations: check all_device_operations[i] 0x00009f1c find_device_operations: cons 0x00009f1c, cons id PCI: 1013:00b8 find_device_operations: check all_device_operations[i] 0x0000b10c find_device_operations: cons 0x0000b10c, cons id PCI_DOMAIN: 8086:7190 find_device_operations: check all_device_operations[i] 0x0000b1a4 find_device_operations: cons 0x0000b1a4, cons id PCI: 8086:7010 constructor: constructor is 0x00000000 No ops found and no constructor called for PCI: 10ec:8029. find_device_operations: check all_device_operations[i] 0x00009f1c find_device_operations: cons 0x00009f1c, cons id PCI: 1013:00b8 find_device_operations: check all_device_operations[i] 0x0000b10c find_device_operations: cons 0x0000b10c, cons id PCI_DOMAIN: 8086:7190 find_device_operations: check all_device_operations[i] 0x0000b1a4 find_device_operations: cons 0x0000b1a4, cons id PCI: 8086:7010 set_pci_ops: dev 0x0000c3d4(dynamic PCI: 00:03.0) set ops to 0x00009e34 PCI: 00:03.0 [PCI: 10ec:8029] enabled PCI: pci_scan_bus pci_probe_dev returns dev 0x0000c3d4(dynamic PCI: 00:03.0) PCI: devfn 0x20 pci_scan_get_dev: list is 0x0008fed4, *list is 0x0000a838 pci_scan_get_dev: check dev bus_0 pci_scan_get_dev: child bus_0(PCI_BUS: 0000) not a pci device: it's type 3 PCI: pci_scan_bus pci_scan_get_dev returns dev None (no dev in tree yet) PCI: devfn 0x20, bad id 0xffffffff PCI: pci_scan_bus pci_probe_dev returns dev 0x00000000(None (not found)) PCI: devfn 0x28 pci_scan_get_dev: list is 0x0008fed4, *list is 0x0000a838 pci_scan_get_dev: check dev bus_0 pci_scan_get_dev: child bus_0(PCI_BUS: 0000) not a pci device: it's type 3 PCI: pci_scan_bus pci_scan_get_dev returns dev None (no dev in tree yet) PCI: devfn 0x28, bad id 0xffffffff PCI: pci_scan_bus pci_probe_dev returns dev 0x00000000(None (not found)) PCI: devfn 0x30 pci_scan_get_dev: list is 0x0008fed4, *list is 0x0000a838 pci_scan_get_dev: check dev bus_0 pci_scan_get_dev: child bus_0(PCI_BUS: 0000) not a pci device: it's type 3 PCI: pci_scan_bus pci_scan_get_dev returns dev None (no dev in tree yet) PCI: devfn 0x30, bad id 0xffffffff PCI: pci_scan_bus pci_probe_dev returns dev 0x00000000(None (not found)) PCI: devfn 0x38 pci_scan_get_dev: list is 0x0008fed4, *list is 0x0000a838 pci_scan_get_dev: check dev bus_0 pci_scan_get_dev: child bus_0(PCI_BUS: 0000) not a pci device: it's type 3 PCI: pci_scan_bus pci_scan_get_dev returns dev None (no dev in tree yet) PCI: devfn 0x38, bad id 0xffffffff PCI: pci_scan_bus pci_probe_dev returns dev 0x00000000(None (not found)) PCI: devfn 0x40 pci_scan_get_dev: list is 0x0008fed4, *list is 0x0000a838 pci_scan_get_dev: check dev bus_0 pci_scan_get_dev: child bus_0(PCI_BUS: 0000) not a pci device: it's type 3 PCI: pci_scan_bus pci_scan_get_dev returns dev None (no dev in tree yet) PCI: devfn 0x40, bad id 0xffffffff PCI: pci_scan_bus pci_probe_dev returns dev 0x00000000(None (not found)) PCI: devfn 0x48 pci_scan_get_dev: list is 0x0008fed4, *list is 0x0000a838 pci_scan_get_dev: check dev bus_0 pci_scan_get_dev: child bus_0(PCI_BUS: 0000) not a pci device: it's type 3 PCI: pci_scan_bus pci_scan_get_dev returns dev None (no dev in tree yet) PCI: devfn 0x48, bad id 0xffffffff PCI: pci_scan_bus pci_probe_dev returns dev 0x00000000(None (not found)) PCI: devfn 0x50 pci_scan_get_dev: list is 0x0008fed4, *list is 0x0000a838 pci_scan_get_dev: check dev bus_0 pci_scan_get_dev: child bus_0(PCI_BUS: 0000) not a pci device: it's type 3 PCI: pci_scan_bus pci_scan_get_dev returns dev None (no dev in tree yet) PCI: devfn 0x50, bad id 0xffffffff PCI: pci_scan_bus pci_probe_dev returns dev 0x00000000(None (not found)) PCI: devfn 0x58 pci_scan_get_dev: list is 0x0008fed4, *list is 0x0000a838 pci_scan_get_dev: check dev bus_0 pci_scan_get_dev: child bus_0(PCI_BUS: 0000) not a pci device: it's type 3 PCI: pci_scan_bus pci_scan_get_dev returns dev None (no dev in tree yet) PCI: devfn 0x58, bad id 0xffffffff PCI: pci_scan_bus pci_probe_dev returns dev 0x00000000(None (not found)) PCI: devfn 0x60 pci_scan_get_dev: list is 0x0008fed4, *list is 0x0000a838 pci_scan_get_dev: check dev bus_0 pci_scan_get_dev: child bus_0(PCI_BUS: 0000) not a pci device: it's type 3 PCI: pci_scan_bus pci_scan_get_dev returns dev None (no dev in tree yet) PCI: devfn 0x60, bad id 0xffffffff PCI: pci_scan_bus pci_probe_dev returns dev 0x00000000(None (not found)) PCI: devfn 0x68 pci_scan_get_dev: list is 0x0008fed4, *list is 0x0000a838 pci_scan_get_dev: check dev bus_0 pci_scan_get_dev: child bus_0(PCI_BUS: 0000) not a pci device: it's type 3 PCI: pci_scan_bus pci_scan_get_dev returns dev None (no dev in tree yet) PCI: devfn 0x68, bad id 0xffffffff PCI: pci_scan_bus pci_probe_dev returns dev 0x00000000(None (not found)) PCI: devfn 0x70 pci_scan_get_dev: list is 0x0008fed4, *list is 0x0000a838 pci_scan_get_dev: check dev bus_0 pci_scan_get_dev: child bus_0(PCI_BUS: 0000) not a pci device: it's type 3 PCI: pci_scan_bus pci_scan_get_dev returns dev None (no dev in tree yet) PCI: devfn 0x70, bad id 0xffffffff PCI: pci_scan_bus pci_probe_dev returns dev 0x00000000(None (not found)) PCI: devfn 0x78 pci_scan_get_dev: list is 0x0008fed4, *list is 0x0000a838 pci_scan_get_dev: check dev bus_0 pci_scan_get_dev: child bus_0(PCI_BUS: 0000) not a pci device: it's type 3 PCI: pci_scan_bus pci_scan_get_dev returns dev None (no dev in tree yet) PCI: devfn 0x78, bad id 0xffffffff PCI: pci_scan_bus pci_probe_dev returns dev 0x00000000(None (not found)) PCI: devfn 0x80 pci_scan_get_dev: list is 0x0008fed4, *list is 0x0000a838 pci_scan_get_dev: check dev bus_0 pci_scan_get_dev: child bus_0(PCI_BUS: 0000) not a pci device: it's type 3 PCI: pci_scan_bus pci_scan_get_dev returns dev None (no dev in tree yet) PCI: devfn 0x80, bad id 0xffffffff PCI: pci_scan_bus pci_probe_dev returns dev 0x00000000(None (not found)) PCI: devfn 0x88 pci_scan_get_dev: list is 0x0008fed4, *list is 0x0000a838 pci_scan_get_dev: check dev bus_0 pci_scan_get_dev: child bus_0(PCI_BUS: 0000) not a pci device: it's type 3 PCI: pci_scan_bus pci_scan_get_dev returns dev None (no dev in tree yet) PCI: devfn 0x88, bad id 0xffffffff PCI: pci_scan_bus pci_probe_dev returns dev 0x00000000(None (not found)) PCI: devfn 0x90 pci_scan_get_dev: list is 0x0008fed4, *list is 0x0000a838 pci_scan_get_dev: check dev bus_0 pci_scan_get_dev: child bus_0(PCI_BUS: 0000) not a pci device: it's type 3 PCI: pci_scan_bus pci_scan_get_dev returns dev None (no dev in tree yet) PCI: devfn 0x90, bad id 0xffffffff PCI: pci_scan_bus pci_probe_dev returns dev 0x00000000(None (not found)) PCI: devfn 0x98 pci_scan_get_dev: list is 0x0008fed4, *list is 0x0000a838 pci_scan_get_dev: check dev bus_0 pci_scan_get_dev: child bus_0(PCI_BUS: 0000) not a pci device: it's type 3 PCI: pci_scan_bus pci_scan_get_dev returns dev None (no dev in tree yet) PCI: devfn 0x98, bad id 0xffffffff PCI: pci_scan_bus pci_probe_dev returns dev 0x00000000(None (not found)) PCI: devfn 0xa0 pci_scan_get_dev: list is 0x0008fed4, *list is 0x0000a838 pci_scan_get_dev: check dev bus_0 pci_scan_get_dev: child bus_0(PCI_BUS: 0000) not a pci device: it's type 3 PCI: pci_scan_bus pci_scan_get_dev returns dev None (no dev in tree yet) PCI: devfn 0xa0, bad id 0xffffffff PCI: pci_scan_bus pci_probe_dev returns dev 0x00000000(None (not found)) PCI: devfn 0xa8 pci_scan_get_dev: list is 0x0008fed4, *list is 0x0000a838 pci_scan_get_dev: check dev bus_0 pci_scan_get_dev: child bus_0(PCI_BUS: 0000) not a pci device: it's type 3 PCI: pci_scan_bus pci_scan_get_dev returns dev None (no dev in tree yet) PCI: devfn 0xa8, bad id 0xffffffff PCI: pci_scan_bus pci_probe_dev returns dev 0x00000000(None (not found)) PCI: devfn 0xb0 pci_scan_get_dev: list is 0x0008fed4, *list is 0x0000a838 pci_scan_get_dev: check dev bus_0 pci_scan_get_dev: child bus_0(PCI_BUS: 0000) not a pci device: it's type 3 PCI: pci_scan_bus pci_scan_get_dev returns dev None (no dev in tree yet) PCI: devfn 0xb0, bad id 0xffffffff PCI: pci_scan_bus pci_probe_dev returns dev 0x00000000(None (not found)) PCI: devfn 0xb8 pci_scan_get_dev: list is 0x0008fed4, *list is 0x0000a838 pci_scan_get_dev: check dev bus_0 pci_scan_get_dev: child bus_0(PCI_BUS: 0000) not a pci device: it's type 3 PCI: pci_scan_bus pci_scan_get_dev returns dev None (no dev in tree yet) PCI: devfn 0xb8, bad id 0xffffffff PCI: pci_scan_bus pci_probe_dev returns dev 0x00000000(None (not found)) PCI: devfn 0xc0 pci_scan_get_dev: list is 0x0008fed4, *list is 0x0000a838 pci_scan_get_dev: check dev bus_0 pci_scan_get_dev: child bus_0(PCI_BUS: 0000) not a pci device: it's type 3 PCI: pci_scan_bus pci_scan_get_dev returns dev None (no dev in tree yet) PCI: devfn 0xc0, bad id 0xffffffff PCI: pci_scan_bus pci_probe_dev returns dev 0x00000000(None (not found)) PCI: devfn 0xc8 pci_scan_get_dev: list is 0x0008fed4, *list is 0x0000a838 pci_scan_get_dev: check dev bus_0 pci_scan_get_dev: child bus_0(PCI_BUS: 0000) not a pci device: it's type 3 PCI: pci_scan_bus pci_scan_get_dev returns dev None (no dev in tree yet) PCI: devfn 0xc8, bad id 0xffffffff PCI: pci_scan_bus pci_probe_dev returns dev 0x00000000(None (not found)) PCI: devfn 0xd0 pci_scan_get_dev: list is 0x0008fed4, *list is 0x0000a838 pci_scan_get_dev: check dev bus_0 pci_scan_get_dev: child bus_0(PCI_BUS: 0000) not a pci device: it's type 3 PCI: pci_scan_bus pci_scan_get_dev returns dev None (no dev in tree yet) PCI: devfn 0xd0, bad id 0xffffffff PCI: pci_scan_bus pci_probe_dev returns dev 0x00000000(None (not found)) PCI: devfn 0xd8 pci_scan_get_dev: list is 0x0008fed4, *list is 0x0000a838 pci_scan_get_dev: check dev bus_0 pci_scan_get_dev: child bus_0(PCI_BUS: 0000) not a pci device: it's type 3 PCI: pci_scan_bus pci_scan_get_dev returns dev None (no dev in tree yet) PCI: devfn 0xd8, bad id 0xffffffff PCI: pci_scan_bus pci_probe_dev returns dev 0x00000000(None (not found)) PCI: devfn 0xe0 pci_scan_get_dev: list is 0x0008fed4, *list is 0x0000a838 pci_scan_get_dev: check dev bus_0 pci_scan_get_dev: child bus_0(PCI_BUS: 0000) not a pci device: it's type 3 PCI: pci_scan_bus pci_scan_get_dev returns dev None (no dev in tree yet) PCI: devfn 0xe0, bad id 0xffffffff PCI: pci_scan_bus pci_probe_dev returns dev 0x00000000(None (not found)) PCI: devfn 0xe8 pci_scan_get_dev: list is 0x0008fed4, *list is 0x0000a838 pci_scan_get_dev: check dev bus_0 pci_scan_get_dev: child bus_0(PCI_BUS: 0000) not a pci device: it's type 3 PCI: pci_scan_bus pci_scan_get_dev returns dev None (no dev in tree yet) PCI: devfn 0xe8, bad id 0xffffffff PCI: pci_scan_bus pci_probe_dev returns dev 0x00000000(None (not found)) PCI: devfn 0xf0 pci_scan_get_dev: list is 0x0008fed4, *list is 0x0000a838 pci_scan_get_dev: check dev bus_0 pci_scan_get_dev: child bus_0(PCI_BUS: 0000) not a pci device: it's type 3 PCI: pci_scan_bus pci_scan_get_dev returns dev None (no dev in tree yet) PCI: devfn 0xf0, bad id 0xffffffff PCI: pci_scan_bus pci_probe_dev returns dev 0x00000000(None (not found)) PCI: devfn 0xf8 pci_scan_get_dev: list is 0x0008fed4, *list is 0x0000a838 pci_scan_get_dev: check dev bus_0 pci_scan_get_dev: child bus_0(PCI_BUS: 0000) not a pci device: it's type 3 PCI: pci_scan_bus pci_scan_get_dev returns dev None (no dev in tree yet) PCI: devfn 0xf8, bad id 0xffffffff PCI: pci_scan_bus pci_probe_dev returns dev 0x00000000(None (not found)) PCI: Done for loop bus_0 ========== PCI: Left over static devices. ===================================== dev_phase3_scan: dynamic PCI: 00:00.0: busdevice 0x0000b538 enabled 1 ops 0x00009e34 dev_phase3_scan: can not scan from here, returning 0 dev_phase3_scan: dynamic PCI: 00:01.0: busdevice 0x0000b824 enabled 1 ops 0x00009e34 dev_phase3_scan: can not scan from here, returning 0 dev_phase3_scan: dynamic PCI: 00:01.1: busdevice 0x0000bb10 enabled 1 ops 0x0000b1a4 dev_phase3_scan: can not scan from here, returning 0 dev_phase3_scan: dynamic PCI: 00:01.3: busdevice 0x0000bdfc enabled 1 ops 0x00009e34 dev_phase3_scan: can not scan from here, returning 0 dev_phase3_scan: dynamic PCI: 00:02.0: busdevice 0x0000c0e8 enabled 1 ops 0x00009f1c dev_phase3_scan: can not scan from here, returning 0 dev_phase3_scan: dynamic PCI: 00:03.0: busdevice 0x0000c3d4 enabled 1 ops 0x00009e34 dev_phase3_scan: can not scan from here, returning 0 PCI: pci_scan_bus returning with max=000 dev_phase3_scan: returning 0 scan_static_bus for root(Root Device) done dev_phase3_scan: returning 0 Phase 3: Done. Show all devs... root(Root Device): enabled 1 have_resources 0 initialized 0 cpus: Unknown device path type: 0 cpus(): enabled 1 have_resources 0 initialized 0 pci_0_0(PCI: 00:00.0): enabled 1 have_resources 0 initialized 0 pci_1_0(PCI: 00:01.0): enabled 1 have_resources 0 initialized 0 bus_0(PCI_BUS: 0000): enabled 1 have_resources 0 initialized 0 domain_0(PCI_DOMAIN: 0000): enabled 1 have_resources 0 initialized 0 dynamic PCI: 00:00.0(PCI: 00:00.0): enabled 1 have_resources 0 initialized 0 dynamic PCI: 00:01.0(PCI: 00:01.0): enabled 1 have_resources 0 initialized 0 dynamic PCI: 00:01.1(PCI: 00:01.1): enabled 1 have_resources 0 initialized 0 dynamic PCI: 00:01.3(PCI: 00:01.3): enabled 1 have_resources 0 initialized 0 dynamic PCI: 00:02.0(PCI: 00:02.0): enabled 1 have_resources 0 initialized 0 dynamic PCI: 00:03.0(PCI: 00:03.0): enabled 1 have_resources 0 initialized 0 Phase 4: Allocating resources... Phase 4: Reading resources... Root Device compute_allocate_io: base: 00000400 size: 00000000 align: 0 gran: 0 read_resources: root(Root Device) read_resources bus 0 link: 0 read_resources: root(Root Device) dtsname cpus have_resources 0 enabled 1 cpus: Unknown device path type: 0 read_resources: cpus() missing phase4_read_resources read_resources: root(Root Device) dtsname domain_0 have_resources 0 enabled 1 read_resources: domain_0(PCI_DOMAIN: 0000) read_resources bus 0 link: 0 read_resources: domain_0(PCI_DOMAIN: 0000) dtsname dynamic PCI: 00:00.0 have_resources 0 enabled 1 read_resources: domain_0(PCI_DOMAIN: 0000) dtsname dynamic PCI: 00:01.0 have_resources 0 enabled 1 read_resources: domain_0(PCI_DOMAIN: 0000) dtsname dynamic PCI: 00:01.1 have_resources 0 enabled 1 read_resources: domain_0(PCI_DOMAIN: 0000) dtsname dynamic PCI: 00:01.3 have_resources 0 enabled 1 read_resources: domain_0(PCI_DOMAIN: 0000) dtsname dynamic PCI: 00:02.0 have_resources 0 enabled 1 read_resources: domain_0(PCI_DOMAIN: 0000) dtsname dynamic PCI: 00:03.0 have_resources 0 enabled 1 read_resources: domain_0(PCI_DOMAIN: 0000) read_resources bus 0 link: 0 done read_resources: root(Root Device) read_resources bus 0 link: 0 done PCI: 00:03.0 10 * [0x00000400 - 0x000004ff] io PCI: 00:01.1 20 * [0x00000800 - 0x0000080f] io Root Device compute_allocate_io: base: 00000810 size: 00000410 align: 8 gran: 0 done Root Device compute_allocate_mem: base: 00000000 size: 00000000 align: 0 gran: 0 read_resources: root(Root Device) read_resources bus 0 link: 0 read_resources: root(Root Device) dtsname cpus have_resources 0 enabled 1 cpus: Unknown device path type: 0 read_resources: cpus() missing phase4_read_resources read_resources: root(Root Device) dtsname domain_0 have_resources 1 enabled 1 read_resources: root(Root Device) read_resources bus 0 link: 0 done PCI: 00:02.0 10 * [0x00000000 - 0x01ffffff] prefmem PCI: 00:02.0 14 * [0x02000000 - 0x02000fff] mem Root Device compute_allocate_mem: base: 02001000 size: 02001000 align: 25 gran: 0 done Phase 4: Done reading resources. Allocating VGA resource PCI: 00:02.0 Setting PCI_BRIDGE_CTL_VGA for bridge PCI_DOMAIN: 0000 Setting PCI_BRIDGE_CTL_VGA for bridge Root Device Phase 4: Setting resources... Root Device compute_allocate_io: base: 00001000 size: 00000410 align: 8 gran: 0 read_resources: root(Root Device) read_resources bus 0 link: 0 read_resources: root(Root Device) dtsname cpus have_resources 0 enabled 1 cpus: Unknown device path type: 0 read_resources: cpus() missing phase4_read_resources read_resources: root(Root Device) dtsname domain_0 have_resources 1 enabled 1 read_resources: root(Root Device) read_resources bus 0 link: 0 done PCI: 00:03.0 10 * [0x00001000 - 0x000010ff] io PCI: 00:01.1 20 * [0x00001400 - 0x0000140f] io Root Device compute_allocate_io: base: 00001410 size: 00000410 align: 8 gran: 0 done Root Device compute_allocate_mem: base: fc000000 size: 02001000 align: 25 gran: 0 read_resources: root(Root Device) read_resources bus 0 link: 0 read_resources: root(Root Device) dtsname cpus have_resources 0 enabled 1 cpus: Unknown device path type: 0 read_resources: cpus() missing phase4_read_resources read_resources: root(Root Device) dtsname domain_0 have_resources 1 enabled 1 read_resources: root(Root Device) read_resources bus 0 link: 0 done PCI: 00:02.0 10 * [0xfc000000 - 0xfdffffff] prefmem PCI: 00:02.0 14 * [0xfe000000 - 0xfe000fff] mem Root Device compute_allocate_mem: base: fe001000 size: 02001000 align: 25 gran: 0 done root(Root Device) assign_resources, bus 0 link: 0 Adding RAM resource (134217728 bytes) domain_0(PCI_DOMAIN: 0000) assign_resources, bus 0 link: 0 PCI: 00:01.1 20 <- [0x0000001400 - 0x000000140f] size 0x00000010 gran 0x04 io PCI: 00:02.0 10 <- [0x00fc000000 - 0x00fdffffff] size 0x02000000 gran 0x19 prefmem PCI: 00:02.0 14 <- [0x00fe000000 - 0x00fe000fff] size 0x00001000 gran 0x0c mem PCI: 00:03.0 10 <- [0x0000001000 - 0x00000010ff] size 0x00000100 gran 0x08 io domain_0(PCI_DOMAIN: 0000) assign_resources, bus 0 link: 0 root(Root Device) assign_resources, bus 0 link: 0 Phase 4: Done setting resources. Phase 4: Done allocating resources. Show all devs... root(Root Device): enabled 1 have_resources 0 initialized 0 cpus: Unknown device path type: 0 cpus(): enabled 1 have_resources 0 initialized 0 pci_0_0(PCI: 00:00.0): enabled 1 have_resources 0 initialized 0 pci_1_0(PCI: 00:01.0): enabled 1 have_resources 0 initialized 0 bus_0(PCI_BUS: 0000): enabled 1 have_resources 0 initialized 0 domain_0(PCI_DOMAIN: 0000): enabled 1 have_resources 1 initialized 0 dynamic PCI: 00:00.0(PCI: 00:00.0): enabled 1 have_resources 1 initialized 0 dynamic PCI: 00:01.0(PCI: 00:01.0): enabled 1 have_resources 1 initialized 0 dynamic PCI: 00:01.1(PCI: 00:01.1): enabled 1 have_resources 1 initialized 0 dynamic PCI: 00:01.3(PCI: 00:01.3): enabled 1 have_resources 1 initialized 0 dynamic PCI: 00:02.0(PCI: 00:02.0): enabled 1 have_resources 1 initialized 0 dynamic PCI: 00:03.0(PCI: 00:03.0): enabled 1 have_resources 1 initialized 0 Phase 5: Enabling resources... cpus: Unknown device path type: 0 dev_phase5: cpus() missing ops pci_dev_enable_resources: dynamic PCI: 00:00.0 (PCI: 00:00.0) cmd <- 140 pci_dev_enable_resources: dynamic PCI: 00:01.0 (PCI: 00:01.0) cmd <- 147 pci_dev_enable_resources: dynamic PCI: 00:01.1 (PCI: 00:01.1) cmd <- 141 pci_dev_enable_resources: dynamic PCI: 00:01.3 (PCI: 00:01.3) cmd <- 140 pci_dev_enable_resources: dynamic PCI: 00:02.0 (PCI: 00:02.0) cmd <- 143 pci_dev_enable_resources: dynamic PCI: 00:03.0 (PCI: 00:03.0) cmd <- 141 Phase 5: Done. Show all devs... root(Root Device): enabled 1 have_resources 0 initialized 0 cpus: Unknown device path type: 0 cpus(): enabled 1 have_resources 0 initialized 0 pci_0_0(PCI: 00:00.0): enabled 1 have_resources 0 initialized 0 pci_1_0(PCI: 00:01.0): enabled 1 have_resources 0 initialized 0 bus_0(PCI_BUS: 0000): enabled 1 have_resources 0 initialized 0 domain_0(PCI_DOMAIN: 0000): enabled 1 have_resources 1 initialized 0 dynamic PCI: 00:00.0(PCI: 00:00.0): enabled 1 have_resources 1 initialized 0 dynamic PCI: 00:01.0(PCI: 00:01.0): enabled 1 have_resources 1 initialized 0 dynamic PCI: 00:01.1(PCI: 00:01.1): enabled 1 have_resources 1 initialized 0 dynamic PCI: 00:01.3(PCI: 00:01.3): enabled 1 have_resources 1 initialized 0 dynamic PCI: 00:02.0(PCI: 00:02.0): enabled 1 have_resources 1 initialized 0 dynamic PCI: 00:03.0(PCI: 00:03.0): enabled 1 have_resources 1 initialized 0 Phase 6: Initializing devices... Phase 6: Root Device init. Phase 6: PCI: 00:01.0 init. Enabling IDE channel 1 Enabling IDE channel 2 Enabling Legacy IDE Phase 6: PCI: 00:00.0 init. PCI: pci_dev_init Probing for option ROM Phase 6: PCI: 00:01.0 init. PCI: pci_dev_init Probing for option ROM Phase 6: PCI: 00:01.1 init. Enabling IDE channel 1 Enabling IDE channel 2 Enabling Legacy IDE Phase 6: PCI: 00:01.3 init. PCI: pci_dev_init Probing for option ROM Phase 6: PCI: 00:02.0 init. PCI: pci_dev_init Probing for option ROM ROM address for PCI: 00:02.0 = c0000 PCI Expansion ROM, signature 0xaa55, INIT size 0x8a00, data ptr 0x736f PCI ROM Image, Vendor 0846, Device ec89, Device or Vendor ID mismatch Vendor 0846, Device ec89 Phase 6: PCI: 00:03.0 init. PCI: pci_dev_init Probing for option ROM Phase 6: Devices initialized. Show all devs... root(Root Device): enabled 1 have_resources 0 initialized 1 cpus: Unknown device path type: 0 cpus(): enabled 1 have_resources 0 initialized 0 pci_0_0(PCI: 00:00.0): enabled 1 have_resources 0 initialized 0 pci_1_0(PCI: 00:01.0): enabled 1 have_resources 0 initialized 1 bus_0(PCI_BUS: 0000): enabled 1 have_resources 0 initialized 0 domain_0(PCI_DOMAIN: 0000): enabled 1 have_resources 1 initialized 0 dynamic PCI: 00:00.0(PCI: 00:00.0): enabled 1 have_resources 1 initialized 1 dynamic PCI: 00:01.0(PCI: 00:01.0): enabled 1 have_resources 1 initialized 1 dynamic PCI: 00:01.1(PCI: 00:01.1): enabled 1 have_resources 1 initialized 1 dynamic PCI: 00:01.3(PCI: 00:01.3): enabled 1 have_resources 1 initialized 1 dynamic PCI: 00:02.0(PCI: 00:02.0): enabled 1 have_resources 1 initialized 1 dynamic PCI: 00:03.0(PCI: 00:03.0): enabled 1 have_resources 1 initialized 1 LAR: Attempting to open 'normal/option_table'. LAR: Start 0xfffc0000 len 0x40000 LAR: seen member normal/option_table LAR: CHECK normal/option_table @ 0xfffc0000 start 0xfffc0050 len 932 reallen 932 compression 0 entry 0x00000000 loadaddress 0x00000000 search_global_resources: mask 4200 type 4200 search_global_resources: dev root, have_resources 0 #resources 2 search_global_resources: dev cpus, have_resources 0 #resources 0 search_global_resources: dev pci_0_0, have_resources 0 #resources 0 search_global_resources: dev pci_1_0, have_resources 0 #resources 0 search_global_resources: dev bus_0, have_resources 0 #resources 0 search_global_resources: dev domain_0, have_resources 1 #resources 3 search_global_resources: dev domain_0, resource 0, flags 40040100 base 0x0 size 0x0 search_global_resources: dev domain_0, resource 1, flags 40040200 base 0x0 size 0x0 search_global_resources: dev domain_0, resource 2, flags e0004200 base 0x0 size 0x8000000 lb_memory_range: start 0x0 size 0x8000000 search_global_resources: dev dynamic PCI: 00:00.0, have_resources 1 #resources 0 search_global_resources: dev dynamic PCI: 00:01.0, have_resources 1 #resources 0 search_global_resources: dev dynamic PCI: 00:01.1, have_resources 1 #resources 1 search_global_resources: dev dynamic PCI: 00:01.1, resource 0, flags 60000100 base 0x1400 size 0x10 search_global_resources: dev dynamic PCI: 00:01.3, have_resources 1 #resources 0 search_global_resources: dev dynamic PCI: 00:02.0, have_resources 1 #resources 2 search_global_resources: dev dynamic PCI: 00:02.0, resource 0, flags 60001200 base 0xfc000000 size 0x2000000 search_global_resources: dev dynamic PCI: 00:02.0, resource 1, flags 60000200 base 0xfe000000 size 0x1000 search_global_resources: dev dynamic PCI: 00:03.0, have_resources 1 #resources 1 search_global_resources: dev dynamic PCI: 00:03.0, resource 0, flags 60000100 base 0x1000 size 0x100 lb_cleanup_memory_ranges: # entries 1 #0: base 0x00000000 size 0x8000000 lb_memory_range: start 0x0 size 0x500 lb_cleanup_memory_ranges: # entries 2 #0: base 0x00000500 size 0x7fffb00 #1: base 0x00000000 size 0x500 lb_memory_range: start 0xf0000 size 0x0 lb_cleanup_memory_ranges: # entries 4 #0: base 0x00000000 size 0x500 #1: base 0x00000500 size 0xefb00 #2: base 0x000f0000 size 0x7f10000 #3: base 0x000f0000 size 0x0 Wrote coreboot table at: 0x00000500 - 0x00000a84 checksum fdd9 Show all devs... root(Root Device): enabled 1 have_resources 0 initialized 1 cpus: Unknown device path type: 0 cpus(): enabled 1 have_resources 0 initialized 0 pci_0_0(PCI: 00:00.0): enabled 1 have_resources 0 initialized 0 pci_1_0(PCI: 00:01.0): enabled 1 have_resources 0 initialized 1 bus_0(PCI_BUS: 0000): enabled 1 have_resources 0 initialized 0 domain_0(PCI_DOMAIN: 0000): enabled 1 have_resources 1 initialized 0 dynamic PCI: 00:00.0(PCI: 00:00.0): enabled 1 have_resources 1 initialized 1 dynamic PCI: 00:01.0(PCI: 00:01.0): enabled 1 have_resources 1 initialized 1 dynamic PCI: 00:01.1(PCI: 00:01.1): enabled 1 have_resources 1 initialized 1 dynamic PCI: 00:01.3(PCI: 00:01.3): enabled 1 have_resources 1 initialized 1 dynamic PCI: 00:02.0(PCI: 00:02.0): enabled 1 have_resources 1 initialized 1 dynamic PCI: 00:03.0(PCI: 00:03.0): enabled 1 have_resources 1 initialized 1 Stage2 code done. LAR: Attempting to open 'normal/payload/segment0'. LAR: Start 0xfffc0000 len 0x40000 LAR: seen member normal/option_table LAR: seen member normal/initram/segment0 LAR: seen member normal/stage2/segment0 LAR: seen member normal/stage2/segment1 LAR: seen member normal/stage2/segment2 LAR: seen member normal/payload/segment0 LAR: CHECK normal/payload/segment0 @ 0xfffc4340 start 0xfffc4390 len 1 reallen 187832 compression 3 entry 0x0010dd64 loadaddress 0x00112448 LAR: Compression algorithm #3 (zeroes) used LAR: Attempting to open 'normal/payload/segment1'. LAR: Start 0xfffc0000 len 0x40000 LAR: seen member normal/option_table LAR: seen member normal/initram/segment0 LAR: seen member normal/stage2/segment0 LAR: seen member normal/stage2/segment1 LAR: seen member normal/stage2/segment2 LAR: seen member normal/payload/segment0 LAR: seen member normal/payload/segment1 LAR: CHECK normal/payload/segment1 @ 0xfffc43a0 start 0xfffc43f0 len 41383 reallen 74820 compression 1 entry 0x0010dd64 loadaddress 0x00100000 LAR: Compression algorithm #1 (lzma) used LAR: Attempting to open 'normal/payload/segment2'. LAR: Start 0xfffc0000 len 0x40000 LAR: seen member normal/option_table LAR: seen member normal/initram/segment0 LAR: seen member normal/stage2/segment0 LAR: seen member normal/stage2/segment1 LAR: seen member normal/stage2/segment2 LAR: seen member normal/payload/segment0 LAR: seen member normal/payload/segment1 LAR: seen member normal/payload/segment2 LAR: CHECK normal/payload/segment2 @ 0xfffce5a0 start 0xfffce5f0 len 47 reallen 72 compression 1 entry 0x0010dd64 loadaddress 0x00140200 LAR: Compression algorithm #1 (lzma) used LAR: Attempting to open 'normal/payload/segment3'. LAR: Start 0xfffc0000 len 0x40000 LAR: seen member normal/option_table LAR: seen member normal/initram/segment0 LAR: seen member normal/stage2/segment0 LAR: seen member normal/stage2/segment1 LAR: seen member normal/stage2/segment2 LAR: seen member normal/payload/segment0 LAR: seen member normal/payload/segment1 LAR: seen member normal/payload/segment2 LAR: seen member bootblock LAR: File not found! LAR: load_file: No such file 'normal/payload/segment3' LAR: load_file_segments: All loaded, entry 0x0010dd64 FILO version 0.5 (uwe@greenwood) Thu May 1 13:27:15 CEST 2008 menu: hda1:/boot/grub/menu.lst IDE time out reset failed, but slave maybe exist hda: LBA48 734MB: QEMU HARDDISK Unrecognized partitioning scheme Press any key to continue. Press any key to continue. Press any key to continue. Press any key to continue. Press any key to continue. Press any key to continue. Press any key to continue. Press any key to continue. Press any key to continue. Press any key to continue. Press any key to continue. Press any key to continue. Press any key to continue. Press any key to continue. Press any key to continue. Press any key to continue. Press any key to continue. Press any key to continue.  FILO 0.5 [ Minimal BASH-like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists the possible completions of a device/filename.] grub> kernel hda:/boot/vmlinuz-2.6.18-6-486 root=/dev/hda console=tty0 consol initrd hda:/boot/initrd.img-2.6.18-6-486 grub> boot  Booting 'hda:/boot/vmlinuz-2.6.18-6-486 root=/dev/hda console=tty0 console=ttyS 0,115200 initrd=hda:/boot/initrd.img-2.6.18-6-486' Mounted ext2fs Found Linux version 2.6.18-6-486 (unknown@Debian) #1 Sun Feb 10 22:06:33 UTC 2008 bzImage. Loading kernel... ok Loading initrd... ok Jumping to entry point... Linux version 2.6.18-6-486 (Debian 2.6.18.dfsg.1-18etch1) (waldi@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 Sun Feb 10 22:06:33 UTC 2008 BIOS-provided physical RAM map: BIOS-e801: 0000000000000000 - 000000000009f000 (usable) BIOS-e801: 0000000000100000 - 0000000008000000 (usable) 128MB LOWMEM available. DMI not present or invalid. ACPI: Unable to locate RSDP Allocating PCI resources starting at 10000000 (gap: 08000000:f8000000) Detected 2000.084 MHz processor. Built 1 zonelists. Total pages: 32768 Kernel command line: root=/dev/hda console=tty0 console=ttyS0,115200 Found and enabled local APIC! Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 1024 (order: 10, 4096 bytes) Console: colour dummy device 80x25 Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 122576k/131072k available (1499k kernel code, 7980k reserved, 599k data, 256k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 4010.30 BogoMIPS (lpj=8020619) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 512 CPU: L1 I cache: 8K CPU: L2 cache: 128K Compat vDSO mapped to ffffe000. CPU: Intel Pentium II (Klamath) stepping 03 Checking 'hlt' instruction... OK. checking if image is initramfs... it is Freeing initrd memory: 4232k freed NET: Registered protocol family 16 EISA bus registered PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: PnP BIOS support was not detected. PCI: Probing PCI hardware * Found PM-Timer Bug on the chipset. Due to workarounds for a bug, * this clock source is slow. Consider trying other clock sources PCI quirk: region b100-b10f claimed by PIIX4 SMB PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 4096 bind 2048) TCP reno registered audit: initializing netlink socket (disabled) audit(1212940909.192:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: PIIX3: Enabling Passive Release on 0000:00:01.0 Limiting direct PCI/PCI transfers. Activating ISA DMA hang workarounds. isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16450 RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize PNP: No PS/2 controller found. Probing ports directly. serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input0 EISA: Probing bus 0 at eisa.0 Cannot allocate resource for EISA slot 1 EISA: Detected 0 cards. TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 8 NET: Registered protocol family 20 Using IPI Shortcut mode Time: tsc clocksource has been installed. Freeing unused kernel memory: 256k freed Loading, please wait... Begin: Loading essential drivers... ... Done. Begin: Running /scripts/init-premount ... FATAL: Error inserting fan (/lib/modules/2.6.18-6-486/kernel/drivers/acpi/fan.ko): No such device FATAL: Error inserting thermal (/lib/modules/2.6.18-6-486/kernel/drivers/acpi/thermal.ko): No such device Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX3: IDE controller at PCI slot 0000:00:01.1 PIIX3: chipset revision 0 PIIX3: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1400-0x1407, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x1408-0x140f, BIOS settings: hdc:pio, hdd:pio ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker http://www.scyld.com/network/ne2k-pci.html hda: QEMU HARDDISK, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: QEMU CD-ROM, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 PCI: No IRQ known for interrupt pin A of device 0000:00:03.0. Please try using pci=biosirq. eth0: RealTek RTL-8029 found at 0x1000, IRQ 0, 52:54:00:12:34:56. hda: max request size: 512KiB hda: 1433600 sectors (734 MB) w/256KiB Cache, CHS=1422/255/63, (U)DMA hda: cache flushes supported hda: unknown partition table hdc: ATAPI 4X CD-ROM drive, 512kB Cache, (U)DMA Uniform CD-ROM driver Revision: 3.20 Done. Begin: Mounting root file system... ... Begin: Running /scripts/local-top ... Done. Begin: Running /scripts/local-premount ... Done. Begin: Running /scripts/local-bottom ... Done. Done. Begin: Running /scripts/init-bottom ... Done. INIT: version 2.86 booting Starting the hotplug events dispatcher: udevd. Synthesizing the initial hotplug events...done. Waiting for /dev to be fully populated...piix4_smbus 0000:00:01.3: Found 0000:00:01.3 device input: PC Speaker as /class/input/input1 input: ImExPS/2 Generic Explorer Mouse as /class/input/input2 ts: Compaq touchscreen protocol output done. Activating swap...done. Checking root file system...fsck 1.40-WIP (14-Nov-2006) /lib/init/rw/rootdev: clean, 11425/89664 files, 59655/179200 blocks done. Setting the system clock.. Cleaning up ifupdown.... Loading kernel modules...done. Loading device-mapper supportdevice-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com . Checking file systems...fsck 1.40-WIP (14-Nov-2006) done. Setting kernel variables...done. Mounting local filesystems...mount: mount point /host does not exist failed. Activating swapfile swap...done. Setting up networking.... Configuring network interfaces...IRQ handler type mismatch for IRQ 0 [] setup_irq+0x17c/0x192 [] ei_interrupt+0x0/0x25d [8390] [] request_irq+0x75/0x90 [] ne2k_pci_open+0x19/0x72 [ne2k_pci] [] dev_open+0x2a/0x5c [] dev_change_flags+0x4a/0xe7 [] devinet_ioctl+0x221/0x53e [] sock_ioctl+0x198/0x1ba [] sock_ioctl+0x0/0x1ba [] do_ioctl+0x16/0x42 [] vfs_ioctl+0x1e3/0x1f1 [] sys_ioctl+0x4a/0x61 [] syscall_call+0x7/0xb SIOCSIFFLAGS: Device or resource busy IRQ handler type mismatch for IRQ 0 [] setup_irq+0x17c/0x192 [] ei_interrupt+0x0/0x25d [8390] [] request_irq+0x75/0x90 [] ne2k_pci_open+0x19/0x72 [ne2k_pci] [] dev_open+0x2a/0x5c [] dev_change_flags+0x4a/0xe7 [] devinet_ioctl+0x221/0x53e [] sock_ioctl+0x198/0x1ba [] sock_ioctl+0x0/0x1ba [] do_ioctl+0x16/0x42 [] vfs_ioctl+0x1e3/0x1f1 [] tasklet_action+0x37/0x57 [] sys_ioctl+0x4a/0x61 [] syscall_call+0x7/0xb SIOCSIFFLAGS: Device or resource busy Failed to bring up eth0. done. INIT: Entering runlevel: 2 Starting system log daemon: syslogd. Starting kernel log daemon: klogd. * Not starting internet superserver: no services enabled. Starting OpenBSD Secure Shell server: sshdNET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver . Starting periodic command scheduler: crond. Debian GNU/Linux 4.0 uml ttyS0 uml login: