# packages

pkgId: 0eaf2751400e8c23980a1a9e3e239440590767575c65b3786b67b32c0369d993
name: perl-Lingua-EN-Inflect
arch: noarch
version: 1.905
epoch: 0
release: 1.1
summary: Convert singular to plural. Select "a" or "an"
url: https://metacpan.org/release/Lingua-EN-Inflect
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Lingua-EN-Inflect-1.905-1.1.src.rpm
location_href: perl-Lingua-EN-Inflect/perl-Lingua-EN-Inflect-1.905-1.1.noarch.rpm
checksum_type: sha256
description:
  *[_Note:_ This module is strictly in maintenance mode now. Take a look at
  the newer Lingua::EN::Inflexion module, which offers a cleaner and more
  convenient interface, has many more features (including plural->singular
  inflexions), and is also much better tested. If you have existing code that
  relies on Lingua::EN::Inflect, see the section of the documentation
  entitled "CONVERTING FROM LINGUA::EN::INFLECT". ]*

  The exportable subroutines of Lingua::EN::Inflect provide plural
  inflections, "a"/"an" selection for English words, and manipulation of
  numbers as words

  Plural forms of all nouns, most verbs, and some adjectives are provided.
  Where appropriate, "classical" variants (for example: "brother" ->
  "brethren", "dogma" -> "dogmata", etc.) are also provided.

  Pronunciation-based "a"/"an" selection is provided for all English words,
  and most initialisms.

  It is also possible to inflect numerals (1,2,3) to ordinals (1st, 2nd, 3rd)
  and to English words ("one", "two", "three).

  In generating these inflections, Lingua::EN::Inflect follows the Oxford
  English Dictionary and the guidelines in Fowler's Modern English Usage,
  preferring the former where the two disagree.

  The module is built around standard British spelling, but is designed to
  cope with common American variants as well. Slang, jargon, and other
  English dialects are _not_ explicitly catered for.

  Where two or more inflected forms exist for a single word (typically a
  "classical" form and a "modern" form), Lingua::EN::Inflect prefers the more
  common form (typically the "modern" one), unless "classical" processing has
  been specified (see "MODERN VS CLASSICAL INFLECTIONS").


pkgId: 0595bcdaa2988df06d9dbac8e3d99b497898cb83da8cc661b8fa831805c555ff
name: perl-Lingua-Translit
arch: noarch
version: 0.29
epoch: 0
release: 1.1
summary: Transliterates text between writing systems
url: https://metacpan.org/release/Lingua-Translit
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Lingua-Translit-0.29-1.1.src.rpm
location_href: perl-Lingua-Translit/perl-Lingua-Translit-0.29-1.1.noarch.rpm
checksum_type: sha256
description:
  Lingua::Translit can be used to convert text from one writing system to
  another, based on national or international transliteration tables. Where
  possible a reverse transliteration is supported.

  The term 'transliteration' describes the conversion of text from one
  writing system or alphabet to another one. The conversion is ideally
  unique, mapping one character to exactly one character, so the original
  spelling can be reconstructed. Practically this is not always the case and
  one single letter of the original alphabet can be transcribed as two, three
  or even more letters.

  Furthermore there is more than one transliteration scheme for one writing
  system. Therefore it is an important and necessary information, which
  scheme will be or has been used to transliterate a text, to work
  integrative and be able to reconstruct the original data.

  Reconstruction is a problem though for non-unique transliterations, if no
  language specific knowledge is available as the resulting clusters of
  letters may be ambiguous. For example, the Greek character "PSI" maps to
  "ps", but "ps" could also result from the sequence "PI", "SIGMA" since "PI"
  maps to "p" and "SIGMA" maps to s. If a transliteration table leads to
  ambiguous conversions, the provided table cannot be used reverse.

  Otherwise the table can be used in both directions, if appreciated. So if
  ISO 9 is originally created to convert Cyrillic letters to the Latin
  alphabet, the reverse transliteration will transform Latin letters to
  Cyrillic.


pkgId: 1194a9c8a8ac3bba93ab63b9153e4c2f7613ceb2c3fcc660a29f054498aa7f71
name: perl-List-AllUtils
arch: noarch
version: 0.19
epoch: 0
release: 1.1
summary: Combines List::Util, List::SomeUtils and List::UtilsBy in one bite-sized[cut]
url: https://metacpan.org/release/List-AllUtils
rpm_license: Artistic-2.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-List-AllUtils-0.19-1.1.src.rpm
location_href: perl-List-AllUtils/perl-List-AllUtils-0.19-1.1.noarch.rpm
checksum_type: sha256
description:
  Are you sick of trying to remember whether a particular helper is defined
  in List::Util, List::SomeUtils or List::UtilsBy? I sure am. Now you don't
  have to remember. This module will export all of the functions that either
  of those three modules defines.

  Note that all function documentation has been shamelessly copied from
  List::Util, List::SomeUtils and List::UtilsBy.


pkgId: b26f4e9f8616d48ddeae27da01b7ae029b4d9e48bd7797b95bbd503da7b984f5
name: perl-List-MoreUtils
arch: noarch
version: 0.430
epoch: 0
release: 1.1
summary: Provide the stuff missing in List::Util
url: https://metacpan.org/release/List-MoreUtils
rpm_license: Apache-2.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-List-MoreUtils-0.430-1.1.src.rpm
location_href: perl-List-MoreUtils/perl-List-MoreUtils-0.430-1.1.noarch.rpm
checksum_type: sha256
description:
  *List::MoreUtils* provides some trivial but commonly needed functionality
  on lists which is not going to go into List::Util.

  All of the below functions are implementable in only a couple of lines of
  Perl code. Using the functions from this module however should give
  slightly better performance as everything is implemented in C. The
  pure-Perl implementation of these functions only serves as a fallback in
  case the C portions of this module couldn't be compiled on this machine.


pkgId: 28c4cad3e8f24a060599f03707f31fccefa1bab31807d803a3972b7692b7d0e2
name: perl-List-MoreUtils-XS
arch: src
version: 0.430
epoch: 0
release: 1.1
summary: Provide compiled List::MoreUtils functions
url: https://metacpan.org/release/List-MoreUtils-XS
rpm_license: (Artistic-1.0 OR GPL-1.0-or-later) AND Apache-2.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
location_href: perl-List-MoreUtils-XS/perl-List-MoreUtils-XS-0.430-1.1.src.rpm
checksum_type: sha256
description:
  List::MoreUtils::XS is a backend for List::MoreUtils. Even if it's possible
  (because of user wishes) to have it practically independent from
  List::MoreUtils, it technically depend on 'List::MoreUtils'. Since it's
  only a backend, the API is not public and can change without any warning.


pkgId: 2e0813d57c2cfc1e2d87b7857b1d1ba59e516d74bc0ac70425fa8920b1bb1c62
name: perl-List-MoreUtils-XS-debuginfo
arch: x86_64
version: 0.430
epoch: 0
release: 1.1
summary: Debug information for package perl-List-MoreUtils-XS
url: https://metacpan.org/release/List-MoreUtils-XS
rpm_license: (Artistic-1.0 OR GPL-1.0-or-later) AND Apache-2.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-List-MoreUtils-XS-0.430-1.1.src.rpm
location_href: perl-List-MoreUtils-XS/perl-List-MoreUtils-XS-debuginfo-0.430-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-List-MoreUtils-XS.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: b755e564e16620f60df161e1f2a58211a55f83c6f3e13c5d246a357e9fa7c8ac
name: perl-List-MoreUtils-XS-debugsource
arch: x86_64
version: 0.430
epoch: 0
release: 1.1
summary: Debug sources for package perl-List-MoreUtils-XS
url: https://metacpan.org/release/List-MoreUtils-XS
rpm_license: (Artistic-1.0 OR GPL-1.0-or-later) AND Apache-2.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-List-MoreUtils-XS-0.430-1.1.src.rpm
location_href: perl-List-MoreUtils-XS/perl-List-MoreUtils-XS-debugsource-0.430-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package perl-List-MoreUtils-XS.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: f9b6df2756f67944360a367ddb7b3740881d951b1636ea4a5655e079d681a36d
name: perl-List-SomeUtils
arch: noarch
version: 0.59
epoch: 0
release: 1.1
summary: Provide the stuff missing in List::Util
url: https://metacpan.org/release/List-SomeUtils
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-List-SomeUtils-0.59-1.1.src.rpm
location_href: perl-List-SomeUtils/perl-List-SomeUtils-0.59-1.1.noarch.rpm
checksum_type: sha256
description:
  *List::SomeUtils* provides some trivial but commonly needed functionality
  on lists which is not going to go into List::Util.

  All of the below functions are implementable in only a couple of lines of
  Perl code. Using the functions from this module however should give
  slightly better performance as everything is implemented in C. The
  pure-Perl implementation of these functions only serves as a fallback in
  case the C portions of this module couldn't be compiled on this machine.


pkgId: ed451cff87de30ac9112e64e6ec7ebe1df858deb3b7dd8135c245326ca6917ec
name: perl-List-SomeUtils-XS
arch: src
version: 0.58
epoch: 0
release: 1.1
summary: XS implementation for List::SomeUtils
url: http://search.cpan.org/dist/List-SomeUtils-XS/
rpm_license: Artistic-2.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
location_href: perl-List-SomeUtils-XS/perl-List-SomeUtils-XS-0.58-1.1.src.rpm
checksum_type: sha256
description:
  There are no user-facing parts here. See List::SomeUtils for API details.

  You shouldn't have to install this module directly. When you install
  List::SomeUtils, it checks whether your system has a compiler. If it does,
  then it adds a dependency on this module so that it gets installed and you
  have the faster XS implementation.

  This distribution requires List::SomeUtils but to avoid a circular
  dependency, that dependency is explicitly left out from the this
  distribution's metadata. However, without LSU already installed this module
  cannot function.


pkgId: cea4c6db47d54e67c8d2511bcee13b0c08fc33c6c1f09b90c3c839a3a07da2db
name: perl-List-SomeUtils-XS-debuginfo
arch: x86_64
version: 0.58
epoch: 0
release: 1.1
summary: Debug information for package perl-List-SomeUtils-XS
url: http://search.cpan.org/dist/List-SomeUtils-XS/
rpm_license: Artistic-2.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-List-SomeUtils-XS-0.58-1.1.src.rpm
location_href: perl-List-SomeUtils-XS/perl-List-SomeUtils-XS-debuginfo-0.58-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-List-SomeUtils-XS.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: b5cadb9877dc3bddcebcf9bd83b32b5bf7347b0072faee83fe83d0314fa8c19e
name: perl-List-SomeUtils-XS-debugsource
arch: x86_64
version: 0.58
epoch: 0
release: 1.1
summary: Debug sources for package perl-List-SomeUtils-XS
url: http://search.cpan.org/dist/List-SomeUtils-XS/
rpm_license: Artistic-2.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-List-SomeUtils-XS-0.58-1.1.src.rpm
location_href: perl-List-SomeUtils-XS/perl-List-SomeUtils-XS-debugsource-0.58-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package perl-List-SomeUtils-XS.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: 57229ebd805b4a5b662d5f8b7d72d8a96a748ea2ec807b2be826a61787f8a467
name: perl-List-UtilsBy
arch: noarch
version: 0.12
epoch: 0
release: 1.1
summary: Higher-order list utility functions
url: https://metacpan.org/release/List-UtilsBy
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-List-UtilsBy-0.12-1.1.src.rpm
location_href: perl-List-UtilsBy/perl-List-UtilsBy-0.12-1.1.noarch.rpm
checksum_type: sha256
description:
  This module provides a number of list utility functions, all of which take
  an initial code block to control their behaviour. They are variations on
  similar core perl or 'List::Util' functions of similar names, but which use
  the block to control their behaviour. For example, the core Perl function
  'sort' takes a list of values and returns them, sorted into order by their
  string value. The sort_by function sorts them according to the string value
  returned by the extra function, when given each value.

     my @names_sorted = sort @names;

     my @people_sorted = sort_by { $_->name } @people;


pkgId: 361b501bf56f885302c215decd21e65a9d0cb887abfbd6cee453071c20d3ca30
name: perl-Log-Log4perl
arch: noarch
version: 1.57
epoch: 0
release: 1.1
summary: Log4j implementation for Perl
url: https://metacpan.org/release/Log-Log4perl
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Log-Log4perl-1.57-1.1.src.rpm
location_href: perl-Log-Log4perl/perl-Log-Log4perl-1.57-1.1.noarch.rpm
checksum_type: sha256
description:
  Log::Log4perl lets you remote-control and fine-tune the logging behaviour
  of your system from the outside. It implements the widely popular
  (Java-based) Log4j logging package in pure Perl.

  *For a detailed tutorial on Log::Log4perl usage, please read*

  http://www.perl.com/pub/a/2002/09/11/log4perl.html

  Logging beats a debugger if you want to know what's going on in your code
  during runtime. However, traditional logging packages are too static and
  generate a flood of log messages in your log files that won't help you.

  'Log::Log4perl' is different. It allows you to control the number of
  logging messages generated at three different levels:

    * At a central location in your system (either in a configuration file or in
  the startup code) you specify _which components_ (classes, functions) of
  your system should generate logs.

    * You specify how detailed the logging of these components should be by
  specifying logging _levels_.

    * You also specify which so-called _appenders_ you want to feed your log
  messages to ("Print it to the screen and also append it to /tmp/my.log")
  and which format ("Write the date first, then the file name and line
  number, and then the log message") they should be in.

  This is a very powerful and flexible mechanism. You can turn on and off
  your logs at any time, specify the level of detail and make that dependent
  on the subsystem that's currently executed.

  Let me give you an example: You might find out that your system has a
  problem in the 'MySystem::Helpers::ScanDir' component. Turning on detailed
  debugging logs all over the system would generate a flood of useless log
  messages and bog your system down beyond recognition. With 'Log::Log4perl',
  however, you can tell the system: "Continue to log only severe errors to
  the log file. Open a second log file, turn on full debug logs in the
  'MySystem::Helpers::ScanDir' component and dump all messages originating
  from there into the new log file". And all this is possible by just
  changing the parameters in a configuration file, which your system can
  re-read even while it's running!


pkgId: e7122276a301c34c0871d38ecba50a442356b1b3898c32d347f59a35ec6cbf53
name: perl-MRO-Compat
arch: noarch
version: 0.15
epoch: 0
release: 1.1
summary: Mro::* interface compatibility for Perls < 5.9.5
url: https://metacpan.org/release/MRO-Compat
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-MRO-Compat-0.15-1.1.src.rpm
location_href: perl-MRO-Compat/perl-MRO-Compat-0.15-1.1.noarch.rpm
checksum_type: sha256
description:
  The "mro" namespace provides several utilities for dealing with method
  resolution order and method caching in general in Perl 5.9.5 and higher.

  This module provides those interfaces for earlier versions of Perl (back to
  5.6.0 anyways).

  It is a harmless no-op to use this module on 5.9.5+. That is to say, code
  which properly uses MRO::Compat will work unmodified on both older Perls
  and 5.9.5+.

  If you're writing a piece of software that would like to use the parts of
  5.9.5+'s mro:: interfaces that are supported here, and you want
  compatibility with older Perls, this is the module for you.

  Some parts of this code will work better and/or faster with Class::C3::XS
  installed (which is an optional prereq of Class::C3, which is in turn a
  prereq of this package), but it's not a requirement.

  This module never exports any functions. All calls must be fully qualified
  with the 'mro::' prefix.

  The interface documentation here serves only as a quick reference of what
  the function basically does, and what differences between MRO::Compat and
  5.9.5+ one should look out for. The main docs in 5.9.5's mro are the real
  interface docs, and contain a lot of other useful information.


pkgId: c38903488e2a01347438ec0311b43d42f3674bc97b151521153eeeaaeeb45f6d
name: perl-Mail-AuthenticationResults
arch: noarch
version: 2.20231031
epoch: 0
release: 1.1
summary: Object Oriented Authentication-Results Headers
url: https://metacpan.org/release/Mail-AuthenticationResults
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Mail-AuthenticationResults-2.20231031-1.1.src.rpm
location_href: perl-Mail-AuthenticationResults/perl-Mail-AuthenticationResults-2.20231031-1.1.noarch.rpm
checksum_type: sha256
description:
  Object Oriented Authentication-Results email headers.

  This parser copes with most styles of Authentication-Results header seen in
  the wild, but is not yet fully RFC7601 compliant

  Differences from RFC7601

  key/value pairs are parsed when present in the authserv-id section, this is
  against RFC but has been seen in headers added by Yahoo!.

  Comments added between key/value pairs will be added after them in the data
  structures and when stringified.


pkgId: 68a0f44fc0149d06e26fdae93f33d50396cf938c3e4462d9d8d2128de561ea9b
name: perl-Mail-DKIM
arch: noarch
version: 1.20240619
epoch: 0
release: 1.1
summary: Signs/verifies Internet mail with DKIM/DomainKey signatures
url: https://metacpan.org/release/Mail-DKIM
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Mail-DKIM-1.20240619-1.1.src.rpm
location_href: perl-Mail-DKIM/perl-Mail-DKIM-1.20240619-1.1.noarch.rpm
checksum_type: sha256
description:
  This module implements the various components of the DKIM and DomainKeys
  message-signing and verifying standards for Internet mail. It currently
  tries to implement these specifications:

  * RFC4871, for DKIM

  * RFC4870, for DomainKeys

  * draft-ietf-dmarc-arc-protocol-06, for ARC

  The module uses an object-oriented interface. You use one of two different
  classes, depending on whether you are signing or verifying a message. To
  sign, use the Mail::DKIM::Signer class. To verify, use the
  Mail::DKIM::Verifier class. Simple, eh?

  Likewise for ARC, use the ARC modules Mail::DKIM::ARC::Signer and
  Mail::DKIM::ARC::Verifier

  If you're sending to test libraries which expect the tags in headers to be
  sorted, you can set $Mail::DKIM::SORTTAGS to a true value, and all created
  headers will get sorted keys


pkgId: d3fcfff4274ef5d6b1263df671c9ffecef01468a6a3fbb9f941677b29db5c123
name: perl-Mail-SPF
arch: noarch
version: 3.202.406.170
epoch: 0
release: 1.1
summary: An object-oriented implementation of Sender Policy Framework
url: https://metacpan.org/release/Mail-SPF
rpm_license: BSD-3-Clause
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Mail-SPF-3.202.406.170-1.1.src.rpm
location_href: perl-Mail-SPF/perl-Mail-SPF-3.202.406.170-1.1.noarch.rpm
checksum_type: sha256
description:
  *Mail::SPF* is an object-oriented implementation of Sender Policy Framework
  (SPF). See http://www.openspf.org for more information about SPF.

  This class collection aims to fully conform to the SPF specification (RFC
  4408) so as to serve both as a production quality SPF implementation and as
  a reference for other developers of SPF implementations.


pkgId: 4f557887c73633d508b69f7b09289fd689c4ef281d0959b97bb3c448b1b210c9
name: perl-Mail-SpamAssassin
arch: noarch
version: 4.0.1
epoch: 0
release: 1.1
summary: Perl Modules For Using Spamassassin Within An Own Perl Script
url: https://spamassassin.apache.org/
rpm_license: Apache-2.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: spamassassin-4.0.1-1.1.src.rpm
location_href: spamassassin/perl-Mail-SpamAssassin-4.0.1-1.1.noarch.rpm
checksum_type: sha256
description:
  This package contains the perl modules for the spamassassin, including
  the filter rules. This package is required for the package
  "spamassassin", the commandline tool.


pkgId: 16e8d3cef6145a525a3e9dc4fdabee06f1a7927f1b65c3d8a218569c48e828e9
name: perl-Mail-SpamAssassin-Plugin-iXhash2
arch: noarch
version: 4.00
epoch: 0
release: 1.1
summary: The iXhash plugin for SpamAssassin
url: https://spamassassin.apache.org/
rpm_license: Apache-2.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: spamassassin-4.0.1-1.1.src.rpm
location_href: spamassassin/perl-Mail-SpamAssassin-Plugin-iXhash2-4.00-1.1.noarch.rpm
checksum_type: sha256
description:
  This archive contains the iXhash2 plugin for the SpamAssassin spam filtering
  software, along with an example config file.

  Basically the plugin provides a network-based test just as razor2, pyzor
  and DCC do. Working solely on the body of an email, it removes parts of it
  and computes a hash value from the rest. These values will then be looked up
  via DNS using the domains given in the config file(s).


pkgId: 03d760b6faea651704730263fe4582eba69b9b8b86831497d37c112946593518
name: perl-MailTools
arch: noarch
version: 2.21
epoch: 0
release: 1.1
summary: Bundle of ancient email modules
url: https://metacpan.org/release/MailTools
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-MailTools-2.21-1.1.src.rpm
location_href: perl-MailTools/perl-MailTools-2.21-1.1.noarch.rpm
checksum_type: sha256
description:
  MailTools is a bundle: an ancient form of combining packages into one
  distribution. Gladly, it can be distributed as if it is a normal
  distribution as well.

  *Be warned:* The code you find here is very old. It works for simple
  emails, but when you start with new code then please use more sofisticated
  libraries. The main reason that you still find this code on CPAN, is
  because many books use it as example.


pkgId: e64f774ae39e44c27fc41eb643cdeded75bf392ea113af6e67bea8212e33001c
name: perl-Mixin-Linewise
arch: noarch
version: 0.111
epoch: 0
release: 1.1
summary: Write your linewise code for handles; this does the rest
url: https://metacpan.org/release/Mixin-Linewise
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Mixin-Linewise-0.111-1.1.src.rpm
location_href: perl-Mixin-Linewise/perl-Mixin-Linewise-0.111-1.1.noarch.rpm
checksum_type: sha256
description:
  It's boring to deal with opening files for IO, converting strings to
  handle-like objects, and all that. With Mixin::Linewise::Readers and
  Mixin::Linewise::Writers, you can just write a method to handle handles,
  and methods for handling strings and filenames are added for you.


pkgId: 7b84d36d9111a14c0666ba5e039fb2a590ae70d7a911c77ab711c016a8269997
name: perl-Module-Build
arch: noarch
version: 0.423400
epoch: 0
release: 1.1
summary: Build and install Perl modules
url: https://metacpan.org/release/Module-Build
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Module-Build-0.423400-1.1.src.rpm
location_href: perl-Module-Build/perl-Module-Build-0.423400-1.1.noarch.rpm
checksum_type: sha256
description:
  'Module::Build' is a system for building, testing, and installing Perl
  modules. It is meant to be an alternative to 'ExtUtils::MakeMaker'.
  Developers may alter the behavior of the module through subclassing. It
  also does not require a 'make' on your system - most of the 'Module::Build'
  code is pure-perl and written in a very cross-platform way.

  See "COMPARISON" for more comparisons between 'Module::Build' and other
  installer tools.

  To install 'Module::Build', and any other module that uses 'Module::Build'
  for its installation process, do the following:

    perl Build.PL       # 'Build.PL' script creates the 'Build' script
    ./Build             # Need ./ to ensure we're using this "Build" script
    ./Build test        # and not another one that happens to be in the PATH
    ./Build install

  This illustrates initial configuration and the running of three 'actions'.
  In this case the actions run are 'build' (the default action), 'test', and
  'install'. Other actions defined so far include:

    build                          manifest
    clean                          manifest_skip
    code                           manpages
    config_data                    pardist
    diff                           ppd
    dist                           ppmdist
    distcheck                      prereq_data
    distclean                      prereq_report
    distdir                        pure_install
    distinstall                    realclean
    distmeta                       retest
    distsign                       skipcheck
    disttest                       test
    docs                           testall
    fakeinstall                    testcover
    help                           testdb
    html                           testpod
    install                        testpodcoverage
    installdeps                    versioninstall

  You can run the 'help' action for a complete list of actions.


pkgId: 87418f454d65757bcdb4b9d2693019001015012427b914230cb4b3dcee4f76b4
name: perl-Module-Build-Tiny
arch: noarch
version: 0.48.0
epoch: 0
release: 1.1
summary: Tiny replacement for Module::Build
url: https://metacpan.org/release/Module-Build-Tiny
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Module-Build-Tiny-0.48.0-1.1.src.rpm
location_href: perl-Module-Build-Tiny/perl-Module-Build-Tiny-0.48.0-1.1.noarch.rpm
checksum_type: sha256
description:
  Many Perl distributions use a Build.PL file instead of a Makefile.PL file
  to drive distribution configuration, build, test and installation.
  Traditionally, Build.PL uses Module::Build as the underlying build system.
  This module provides a simple, lightweight, drop-in replacement.

  Whereas Module::Build has over 6,700 lines of code; this module has less
  than 200, yet supports the features needed by most distributions.


pkgId: 9045f9a91aff36dc113d89df193aaf153a6446697dc6ad3c6cef83f2364ccdd8
name: perl-Module-Implementation
arch: noarch
version: 0.09
epoch: 0
release: 1.1
summary: Loads one of several alternate underlying implementations for a module
url: http://search.cpan.org/dist/Module-Implementation/
rpm_license: Artistic-2.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Module-Implementation-0.09-1.1.src.rpm
location_href: perl-Module-Implementation/perl-Module-Implementation-0.09-1.1.noarch.rpm
checksum_type: sha256
description:
  This module abstracts out the process of choosing one of several underlying
  implementations for a module. This can be used to provide XS and pure Perl
  implementations of a module, or it could be used to load an implementation
  for a given OS or any other case of needing to provide multiple
  implementations.

  This module is only useful when you know all the implementations ahead of
  time. If you want to load arbitrary implementations then you probably want
  something like a plugin system, not this module.


pkgId: d927821190b7eb374e6d6a33125711885eb2958a0bdaea9f70b321e778013cdb
name: perl-Module-Load-Conditional
arch: noarch
version: 0.74
epoch: 0
release: 1.1
summary: Looking up module information / loading at runtime
url: https://metacpan.org/release/Module-Load-Conditional
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Module-Load-Conditional-0.74-1.1.src.rpm
location_href: perl-Module-Load-Conditional/perl-Module-Load-Conditional-0.74-1.1.noarch.rpm
checksum_type: sha256
description:
  Module::Load::Conditional provides simple ways to query and possibly load
  any of the modules you have installed on your system during runtime.

  It is able to load multiple modules at once or none at all if one of them
  was not able to load. It also takes care of any error checking and so
  forth.


pkgId: c73fb550eed5ffbbf2fcc25e46173727d4b7a821fad5674b48afcf3f4dac368f
name: perl-Module-Metadata
arch: noarch
version: 1.000038
epoch: 0
release: 1.1
summary: Gather package and POD information from perl module files
url: https://metacpan.org/release/Module-Metadata
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Module-Metadata-1.000038-1.1.src.rpm
location_href: perl-Module-Metadata/perl-Module-Metadata-1.000038-1.1.noarch.rpm
checksum_type: sha256
description:
  This module provides a standard way to gather metadata about a .pm file
  through (mostly) static analysis and (some) code execution. When
  determining the version of a module, the '$VERSION' assignment is 'eval'ed,
  as is traditional in the CPAN toolchain.


pkgId: e31a50016068dd67a16526fbbe7dcedd0ace762fee40c99b8dced868b42d8fb1
name: perl-Module-Pluggable
arch: noarch
version: 5.2
epoch: 0
release: 1.1
summary: Automatically Give Your Module the Ability to Have Plugins
url: http://search.cpan.org/dist/Module-Pluggable/
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Module-Pluggable-5.2-1.1.src.rpm
location_href: perl-Module-Pluggable/perl-Module-Pluggable-5.2-1.1.noarch.rpm
checksum_type: sha256
description:
  Provides a simple but, hopefully, extensible way of having 'plugins' for
  your module. Obviously this isn't going to be the be all and end all of
  solutions but it works for me.

  Essentially all it does is export a method into your namespace that looks
  through a search path for .pm files and turn those into class names.

  Optionally it instantiates those classes for you.


pkgId: a6105982177ed10c472299b739f77ec15f73e94597a7c4d969a7efb1cb278f46
name: perl-Module-Runtime
arch: noarch
version: 0.016
epoch: 0
release: 1.1
summary: Runtime Module Handling
url: http://search.cpan.org/dist/Module-Runtime/
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Module-Runtime-0.016-1.1.src.rpm
location_href: perl-Module-Runtime/perl-Module-Runtime-0.016-1.1.noarch.rpm
checksum_type: sha256
description:
  The functions exported by this module deal with runtime handling of Perl
  modules, which are normally handled at compile time. This module avoids
  using any other modules, so that it can be used in low-level
  infrastructure.

  The parts of this module that work with module names apply the same syntax
  that is used for barewords in Perl source. In principle this syntax can
  vary between versions of Perl, and this module applies the syntax of the
  Perl on which it is running. In practice the usable syntax hasn't changed
  yet. There's some intent for Unicode module names to be supported in the
  future, but this hasn't yet amounted to any consistent facility.

  The functions of this module whose purpose is to load modules include
  workarounds for three old Perl core bugs regarding 'require'. These
  workarounds are applied on any Perl version where the bugs exist, except
  for a case where one of the bugs cannot be adequately worked around in pure
  Perl.


pkgId: aecae0056b5905b21614e328b550ee931312493657d777330c419d4220aca6e8
name: perl-Mojo-DOM58
arch: noarch
version: 3.001
epoch: 0
release: 1.1
summary: Minimalistic HTML/XML DOM parser with CSS selectors
url: https://metacpan.org/release/Mojo-DOM58
rpm_license: Artistic-2.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Mojo-DOM58-3.001-1.1.src.rpm
location_href: perl-Mojo-DOM58/perl-Mojo-DOM58-3.001-1.1.noarch.rpm
checksum_type: sha256
description:
  Mojo::DOM58 is a minimalistic and relaxed pure-perl HTML/XML DOM parser
  based on Mojo::DOM. It supports the at https://html.spec.whatwg.org/ and at
  https://www.w3.org/TR/xml/, and matching based on at
  https://www.w3.org/TR/selectors/. It will even try to interpret broken HTML
  and XML, so you should not use it for validation.


pkgId: 2bfe22825eb9d9b555910fbca2f069c8c4b3764277022156ed04a0cb81c3d248
name: perl-Moo
arch: noarch
version: 2.005005
epoch: 0
release: 1.1
summary: Minimalist Object Orientation (with Moose compatibility)
url: https://metacpan.org/release/Moo
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Moo-2.005005-1.1.src.rpm
location_href: perl-Moo/perl-Moo-2.005005-1.1.noarch.rpm
checksum_type: sha256
description:
  'Moo' is an extremely light-weight Object Orientation system. It allows one
  to concisely define objects and roles with a convenient syntax that avoids
  the details of Perl's object system. 'Moo' contains a subset of Moose and
  is optimised for rapid startup.

  'Moo' avoids depending on any XS modules to allow for simple deployments.
  The name 'Moo' is based on the idea that it provides almost -- but not
  quite -- two thirds of Moose. As such, the Moose::Manual can serve as an
  effective guide to 'Moo' aside from the MOP and Types sections.

  Unlike Mouse this module does not aim at full compatibility with Moose's
  surface syntax, preferring instead to provide full interoperability via the
  metaclass inflation capabilities described in MOO AND MOOSE.

  For a full list of the minor differences between Moose and Moo's surface
  syntax, see INCOMPATIBILITIES WITH MOOSE.


pkgId: 374f812f2d570d5695e433991a5136496150fd9e8e4217e5c61e7117d7c2e92a
name: perl-Net-CIDR-Lite
arch: noarch
version: 0.22
epoch: 0
release: 1.1
summary: Perl extension for merging IPv4 or IPv6 CIDR addresses
url: https://metacpan.org/release/Net-CIDR-Lite
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Net-CIDR-Lite-0.22-1.1.src.rpm
location_href: perl-Net-CIDR-Lite/perl-Net-CIDR-Lite-0.22-1.1.noarch.rpm
checksum_type: sha256
description:
  Faster alternative to Net::CIDR when merging a large number of CIDR address
  ranges. Works for IPv4 and IPv6 addresses.


pkgId: 048a62e3cdc8061894bd5d1421c4ec46629e588a9dbecff56f27a4999094011c
name: perl-Net-DBus
arch: src
version: 1.2.0
epoch: 0
release: 1.1
summary: Perl extension for the DBus message system
url: https://metacpan.org/release/Net-DBus
rpm_license: GPL-2.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
location_href: perl-Net-DBus/perl-Net-DBus-1.2.0-1.1.src.rpm
checksum_type: sha256
description:
  Net::DBus provides a Perl API for the DBus message system. The DBus Perl
  interface is currently operating against the 0.32 development version of
  DBus, but should work with later versions too, providing the API changes
  have not been too drastic.

  Users of this package are either typically, service providers in which case
  the Net::DBus::Service and Net::DBus::Object modules are of most relevance,
  or are client consumers, in which case Net::DBus::RemoteService and
  Net::DBus::RemoteObject are of most relevance.


pkgId: b069b82dc87dd44c9441d6e9406d84890673a9dffda30130e16921b5fd312d33
name: perl-Net-DBus-debuginfo
arch: x86_64
version: 1.2.0
epoch: 0
release: 1.1
summary: Debug information for package perl-Net-DBus
url: https://metacpan.org/release/Net-DBus
rpm_license: GPL-2.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Net-DBus-1.2.0-1.1.src.rpm
location_href: perl-Net-DBus/perl-Net-DBus-debuginfo-1.2.0-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-Net-DBus.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 139e874e58447d0a573529c63354ff949482a4c6ce6a3e1b3c23a409e36a78bb
name: perl-Net-DBus-debugsource
arch: x86_64
version: 1.2.0
epoch: 0
release: 1.1
summary: Debug sources for package perl-Net-DBus
url: https://metacpan.org/release/Net-DBus
rpm_license: GPL-2.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Net-DBus-1.2.0-1.1.src.rpm
location_href: perl-Net-DBus/perl-Net-DBus-debugsource-1.2.0-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package perl-Net-DBus.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: f94593a0ae469b4dbbf56ebeb44664c9cc5a560ddbbee14960cb3273e1d5852d
name: perl-Net-DNS
arch: noarch
version: 1.450.0
epoch: 0
release: 1.1
summary: Perl Interface to the Domain Name System
url: https://metacpan.org/release/Net-DNS
rpm_license: MIT
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Net-DNS-1.450.0-1.1.src.rpm
location_href: perl-Net-DNS/perl-Net-DNS-1.450.0-1.1.noarch.rpm
checksum_type: sha256
description:
  Net::DNS is a collection of Perl modules that act as a Domain Name System
  (DNS) resolver. It allows the programmer to perform DNS queries that are
  beyond the capabilities of "gethostbyname" and "gethostbyaddr".

  The programmer should be familiar with the structure of a DNS packet and
  the zone file presentation format described in RFC1035.


pkgId: 78e73a34d3860ba8b85bc88f2c9f9decba4b0cb4914c4d460325e527202ce2b9
name: perl-Net-DNS-Resolver-Mock
arch: noarch
version: 1.20230216
epoch: 0
release: 1.1
summary: Mock a DNS Resolver object for testing
url: https://metacpan.org/release/Net-DNS-Resolver-Mock
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Net-DNS-Resolver-Mock-1.20230216-1.1.src.rpm
location_href: perl-Net-DNS-Resolver-Mock/perl-Net-DNS-Resolver-Mock-1.20230216-1.1.noarch.rpm
checksum_type: sha256
description:
  A subclass of Net::DNS::Resolver which parses a zonefile for it's data
  source. Primarily for use in testing.


pkgId: 4edd2931e4b37b2a15eb754f72def42534816064355b1db7faee9122fd8dc0ac
name: perl-Net-DNS-Resolver-Programmable
arch: noarch
version: 0.009
epoch: 0
release: 1.1
summary: Programmable Dns Resolver Class for Offline
url: http://search.cpan.org/dist/Net-DNS-Resolver-Programmable/
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Net-DNS-Resolver-Programmable-0.009-1.1.src.rpm
location_href: perl-Net-DNS-Resolver-Programmable/perl-Net-DNS-Resolver-Programmable-0.009-1.1.noarch.rpm
checksum_type: sha256
description:
  *Net::DNS::Resolver::Programmable* is a *Net::DNS::Resolver* descendant
  class that allows a virtual DNS to be emulated instead of querying the real
  DNS. A set of static DNS records may be supplied, or arbitrary code may be
  specified as a means for retrieving DNS records, or even generating them on
  the fly.


pkgId: 4c2cbef3e400a2e0fb7915fcf58fb52008de599203899d4e74e79a42e4cbb82c
name: perl-Net-HTTP
arch: noarch
version: 6.23
epoch: 0
release: 1.1
summary: Low-level HTTP connection (client)
url: https://metacpan.org/release/Net-HTTP
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Net-HTTP-6.23-1.1.src.rpm
location_href: perl-Net-HTTP/perl-Net-HTTP-6.23-1.1.noarch.rpm
checksum_type: sha256
description:
  The 'Net::HTTP' class is a low-level HTTP client. An instance of the
  'Net::HTTP' class represents a connection to an HTTP server. The HTTP
  protocol is described in RFC 2616. The 'Net::HTTP' class supports
  'HTTP/1.0' and 'HTTP/1.1'.

  'Net::HTTP' is a sub-class of one of 'IO::Socket::IP' (IPv6+IPv4),
  'IO::Socket::INET6' (IPv6+IPv4), or 'IO::Socket::INET' (IPv4 only). You can
  mix the methods described below with reading and writing from the socket
  directly. This is not necessary a good idea, unless you know what you are
  doing.


pkgId: 783ca35b154141fcd62bff7bd83894bdb8a9e12127ee6acced22023f74611f8a
name: perl-Net-Ident
arch: noarch
version: 1.25
epoch: 0
release: 1.1
summary: Lookup the username on the remote end of a TCP/IP connection
url: https://metacpan.org/release/Net-Ident
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Net-Ident-1.25-1.1.src.rpm
location_href: perl-Net-Ident/perl-Net-Ident-1.25-1.1.noarch.rpm
checksum_type: sha256
description:
  You can either use the simple interface, which does one ident lookup at a
  time, or use the asynchronous interface to perform (possibly) many
  simultaneous lookups, or simply continue serving other things while the
  lookup is proceeding.


pkgId: d8744bdd960cb44f85470cbddb6a06f1c5878eb468bac82f40372d38c536f987
name: perl-Net-LibIDN
arch: src
version: 0.12
epoch: 0
release: 1.1
summary: Net::LibIDN Perl module
url: http://search.cpan.org/dist/Net-LibIDN/
rpm_license: GPL-1.0+ or Artistic-1.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
location_href: perl-Net-LibIDN/perl-Net-LibIDN-0.12-1.1.src.rpm
checksum_type: sha256
description:
  This module provides Perl bindings for GNU Libidn by Simon Josefsson
  (http://www.gnu.org/software/libidn/) in way that was heavily inspired by
  PHP bindings for the same library done by Turbo Fredriksson (http://php-
  idn.bayour.com/).

  Authors:
  --------
      Thomas Jacob, http://internet24.de


pkgId: 57734eba72e5a8652a133ea0864d1a9ebe642d3ade25146e2061ba0ed4fdfe77
name: perl-Net-LibIDN-debuginfo
arch: x86_64
version: 0.12
epoch: 0
release: 1.1
summary: Debug information for package perl-Net-LibIDN
url: http://search.cpan.org/dist/Net-LibIDN/
rpm_license: GPL-1.0+ or Artistic-1.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Net-LibIDN-0.12-1.1.src.rpm
location_href: perl-Net-LibIDN/perl-Net-LibIDN-debuginfo-0.12-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-Net-LibIDN.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 289febbc77821908b7550d74a05debe09651be00369736263ddfe9c320fe9bc4
name: perl-Net-LibIDN-debugsource
arch: x86_64
version: 0.12
epoch: 0
release: 1.1
summary: Debug sources for package perl-Net-LibIDN
url: http://search.cpan.org/dist/Net-LibIDN/
rpm_license: GPL-1.0+ or Artistic-1.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Net-LibIDN-0.12-1.1.src.rpm
location_href: perl-Net-LibIDN/perl-Net-LibIDN-debugsource-0.12-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package perl-Net-LibIDN.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: b02ebdba7355129d59b5cd84571d772d53e53bc9a0e9e13ffffec6758f855439
name: perl-Net-Patricia
arch: src
version: 1.22
epoch: 0
release: 1.1
summary: Patricia Trie perl module for fast IP address lookups
url: http://search.cpan.org/dist/Net-Patricia/
rpm_license: BSD-2-Clause AND GPL-2.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
location_href: perl-Net-Patricia/perl-Net-Patricia-1.22-1.1.src.rpm
checksum_type: sha256
description:
  This module uses a Patricia Trie data structure to quickly perform IP
  address prefix matching for applications such as IP subnet, network or
  routing table lookups. The data structure is based on a radix tree using a
  radix of two, so sometimes you see patricia implementations called "radix"
  as well. The term "Trie" is derived from the word "retrieval" but is
  pronounced like "try". Patricia stands for "Practical Algorithm to Retrieve
  Information Coded as Alphanumeric", and was first suggested for routing
  table lookups by Van Jacobsen. Patricia Trie performance characteristics
  are well-known as it has been employed for routing table lookups within the
  BSD kernel since the 4.3 Reno release.

  The BSD radix code is thoroughly described in "TCP/IP Illustrated, Volume
  2" by Wright and Stevens and in the paper ``A Tree-Based Packet Routing
  Table for Berkeley Unix'' by Keith Sklower.


pkgId: 374f1fc3861a261aa55d558b293758b6ac01ed31ae32fcc11e203d2cdc847ebf
name: perl-Net-Patricia-debuginfo
arch: x86_64
version: 1.22
epoch: 0
release: 1.1
summary: Debug information for package perl-Net-Patricia
url: http://search.cpan.org/dist/Net-Patricia/
rpm_license: BSD-2-Clause AND GPL-2.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Net-Patricia-1.22-1.1.src.rpm
location_href: perl-Net-Patricia/perl-Net-Patricia-debuginfo-1.22-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-Net-Patricia.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: e12898455233795fd846a5c90753c061c70ad1d403a413b2d205ddf7102a9f25
name: perl-Net-Patricia-debugsource
arch: x86_64
version: 1.22
epoch: 0
release: 1.1
summary: Debug sources for package perl-Net-Patricia
url: http://search.cpan.org/dist/Net-Patricia/
rpm_license: BSD-2-Clause AND GPL-2.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Net-Patricia-1.22-1.1.src.rpm
location_href: perl-Net-Patricia/perl-Net-Patricia-debugsource-1.22-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package perl-Net-Patricia.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: e7d94552225a26d87e5e4ba59cf4739fd115aa1182b8be9128d273fa3d731ed1
name: perl-Net-SMTP-SSL
arch: noarch
version: 1.04
epoch: 0
release: 1.1
summary: SSL support for Net::SMTP
url: http://search.cpan.org/dist/Net-SMTP-SSL/
rpm_license: GPL-1.0+ or Artistic-1.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Net-SMTP-SSL-1.04-1.1.src.rpm
location_href: perl-Net-SMTP-SSL/perl-Net-SMTP-SSL-1.04-1.1.noarch.rpm
checksum_type: sha256
description:
  Implements the same API as Net::SMTP, but uses IO::Socket::SSL for its
  network operations. Due to the nature of 'Net::SMTP''s 'new' method, it is
  not overridden to make use of a default port for the SMTPS service. Perhaps
  future versions will be smart like that. Port '465' is usually what you
  want, and it's not a pain to specify that.

  For interface documentation, please see Net::SMTP.


pkgId: 1982f77796abd475059d7e69a9fb6091fc9a6b54cc0b8f7086bd05ad9c3b5677
name: perl-Net-SNMP
arch: noarch
version: 6.0.1
epoch: 0
release: 1.1
summary: Object oriented interface to SNMP
url: http://search.cpan.org/dist/Net-SNMP/
rpm_license: GPL-1.0+ or Artistic-1.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Net-SNMP-6.0.1-1.1.src.rpm
location_href: perl-Net-SNMP/perl-Net-SNMP-6.0.1-1.1.noarch.rpm
checksum_type: sha256
description:
  The Net::SNMP module abstracts the intricate details of the Simple
  Network Management Protocol by providing a high level programming
  interface to the protocol. Each Net::SNMP object provides a one-to-one
  mapping between a Perl object and a remote SNMP agent or manager. Once an
  object is created, it can be used to perform the basic protocol exchange
  actions defined by SNMP.

  Authors:
  --------
      David M. Town <dtown@fore.com>


pkgId: cf058d53a3e417ec24364e620017fcf9fa67b0af6b57f0e3bccefb99bf1757c5
name: perl-Net-SSLeay-debuginfo
arch: x86_64
version: 1.940.0
epoch: 0
release: 1.1
summary: Debug information for package perl-Net-SSLeay
url: https://metacpan.org/release/Net-SSLeay
rpm_license: Artistic-2.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Net-SSLeay-1.940.0-1.1.src.rpm
location_href: perl-Net-SSLeay/perl-Net-SSLeay-debuginfo-1.940.0-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-Net-SSLeay.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 0adefc53da37416d2149bc3d5c0afbcee9a1f6ffd38f02ff8ce0ac3c28ae0871
name: perl-Net-SSLeay-debugsource
arch: x86_64
version: 1.940.0
epoch: 0
release: 1.1
summary: Debug sources for package perl-Net-SSLeay
url: https://metacpan.org/release/Net-SSLeay
rpm_license: Artistic-2.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Net-SSLeay-1.940.0-1.1.src.rpm
location_href: perl-Net-SSLeay/perl-Net-SSLeay-debugsource-1.940.0-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package perl-Net-SSLeay.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: b889edf6266e917f3da5ddbc4dde12f68ac99120371bc9a37f31391a94d649eb
name: perl-Net-Server
arch: noarch
version: 2.014
epoch: 0
release: 1.1
summary: Extensible Perl internet server
url: https://metacpan.org/release/Net-Server
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Net-Server-2.014-1.1.src.rpm
location_href: perl-Net-Server/perl-Net-Server-2.014-1.1.noarch.rpm
checksum_type: sha256
description:
  'Net::Server' is an extensible, generic Perl server engine.

  'Net::Server' attempts to be a generic server as in 'Net::Daemon' and
  'NetServer::Generic'. It includes with it the ability to run as an inetd
  process ('Net::Server::INET'), a single connection server ('Net::Server' or
  'Net::Server::Single'), a forking server ('Net::Server::Fork'), a
  preforking server which maintains a constant number of preforked children
  ('Net::Server::PreForkSimple'), or as a managed preforking server which
  maintains the number of children based on server load
  ('Net::Server::PreFork'). In all but the inetd type, the server provides
  the ability to connect to one or to multiple server ports.

  The additional server types are made possible via "personalities" or sub
  classes of the 'Net::Server'. By moving the multiple types of servers out
  of the main 'Net::Server' class, the 'Net::Server' concept is easily
  extended to other types (in the near future, we would like to add a
  "Thread" personality).

  'Net::Server' borrows several concepts from the Apache Webserver.
  'Net::Server' uses "hooks" to allow custom servers such as SMTP, HTTP,
  POP3, etc. to be layered over the base 'Net::Server' class. In addition the
  'Net::Server::PreFork' class borrows concepts of min_start_servers,
  max_servers, and min_waiting servers. 'Net::Server::PreFork' also uses the
  concept of an flock serialized accept when accepting on multiple ports
  (PreFork can choose between flock, IPC::Semaphore, and pipe to control
  serialization).


pkgId: 010931e2cda49e6c8dfea2fb2122df7e95e42d4279de3d5dd5b437978444b235
name: perl-NetAddr-IP
arch: src
version: 4.079
epoch: 0
release: 1.1
summary: Manages IPv4 and IPv6 addresses and subnets
url: http://search.cpan.org/dist/NetAddr-IP/
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
location_href: perl-NetAddr-IP/perl-NetAddr-IP-4.079-1.1.src.rpm
checksum_type: sha256
description:
  This module provides an object-oriented abstraction on top of IP addresses
  or IP subnets that allows for easy manipulations. Version 4.xx of
  NetAddr::IP will work with older versions of Perl and is compatible with
  Math::BigInt.

  The internal representation of all IP objects is in 128 bit IPv6 notation.
  IPv4 and IPv6 objects may be freely mixed.


pkgId: 06cc5fbb5eb9fc2c6619a1b4b8e552904ee10c7cda2ef4a7ce4e6c736714b4bc
name: perl-NetAddr-IP-debuginfo
arch: x86_64
version: 4.079
epoch: 0
release: 1.1
summary: Debug information for package perl-NetAddr-IP
url: http://search.cpan.org/dist/NetAddr-IP/
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-NetAddr-IP-4.079-1.1.src.rpm
location_href: perl-NetAddr-IP/perl-NetAddr-IP-debuginfo-4.079-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-NetAddr-IP.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 1d7a49ad5a6e4744a28e37f5b8f23d98aa7ad16fc28af3b88ab13307a7a91466
name: perl-NetAddr-IP-debugsource
arch: x86_64
version: 4.079
epoch: 0
release: 1.1
summary: Debug sources for package perl-NetAddr-IP
url: http://search.cpan.org/dist/NetAddr-IP/
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-NetAddr-IP-4.079-1.1.src.rpm
location_href: perl-NetAddr-IP/perl-NetAddr-IP-debugsource-4.079-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package perl-NetAddr-IP.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: a01a946988271aab803b21aeb23a23cbab92279525e0fb96a66ce6611ffb7c45
name: perl-Number-Compare
arch: noarch
version: 0.03
epoch: 0
release: 1.1
summary: Numeric comparisons
url: https://search.cpan.org/dist/Number-Compare/
rpm_license: GPL-1.0-or-later OR Artistic-1.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Number-Compare-0.03-1.1.src.rpm
location_href: perl-Number-Compare/perl-Number-Compare-0.03-1.1.noarch.rpm
checksum_type: sha256
description:
  Number::Compare compiles a simple comparison to an anonymous subroutine,
  which you can call with a value to be tested again.

  Now this would be very pointless, if Number::Compare didn't understand
  magnitudes.

  The target value may use magnitudes of kilobytes ('k', 'ki'), megabytes
  ('m', 'mi'), or gigabytes ('g', 'gi'). Those suffixed with an 'i' use the
  appropriate 2**n version in accordance with the IEC standard:
  https://physics.nist.gov/cuu/Units/binary.html


pkgId: 5fabd7398709624365e52f0687aca4f05cc7291d72595990a74b8fe56eeaa3e3
name: perl-OLE-Storage_Lite
arch: noarch
version: 0.22
epoch: 0
release: 1.1
summary: Read and write OLE storage files
url: https://metacpan.org/release/OLE-Storage_Lite
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-OLE-Storage_Lite-0.22-1.1.src.rpm
location_href: perl-OLE-Storage_Lite/perl-OLE-Storage_Lite-0.22-1.1.noarch.rpm
checksum_type: sha256
description:
  OLE::Storage_Lite allows you to read and write an OLE structured file.

  OLE::Storage_Lite::PPS is a class representing PPS.
  OLE::Storage_Lite::PPS::Root, OLE::Storage_Lite::PPS::File and
  OLE::Storage_Lite::PPS::Dir are subclasses of OLE::Storage_Lite::PPS.


pkgId: 47b920b40ae60678b0f1744ff3c92028662e59c0bf1de0f69cf15ff2b32e4764
name: perl-PCP-LogImport
arch: x86_64
version: 6.2.1
epoch: 0
release: 1.1
summary: Performance Co-Pilot Perl bindings for importing external archive data
url: https://pcp.io
rpm_license: GPL-2.0+
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Other
rpm_buildhost: reproducible
rpm_sourcerpm: pcp-6.2.1-1.1.src.rpm
location_href: pcp/perl-PCP-LogImport-6.2.1-1.1.x86_64.rpm
checksum_type: sha256
description:
  The PCP::LogImport module contains the Perl language bindings for
  importing data in various 3rd party formats into PCP archives so
  they can be replayed with standard PCP monitoring tools.


pkgId: a3ef6151301c27e82fd8a61c1b1254055f24d16acddb44bff39a0e9e42fc07be
name: perl-PCP-LogImport-debuginfo
arch: x86_64
version: 6.2.1
epoch: 0
release: 1.1
summary: Debug information for package perl-PCP-LogImport
url: https://pcp.io
rpm_license: GPL-2.0+
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: pcp-6.2.1-1.1.src.rpm
location_href: pcp/perl-PCP-LogImport-debuginfo-6.2.1-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-PCP-LogImport.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: aa4abf3efd3ffa0dd31b2f8d99199fdcf96194393c23c687239ccac23662412f
name: perl-PCP-LogSummary
arch: x86_64
version: 6.2.1
epoch: 0
release: 1.1
summary: Performance Co-Pilot Perl bindings for processing pmlogsummary output
url: https://pcp.io
rpm_license: GPL-2.0+
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Other
rpm_buildhost: reproducible
rpm_sourcerpm: pcp-6.2.1-1.1.src.rpm
location_href: pcp/perl-PCP-LogSummary-6.2.1-1.1.x86_64.rpm
checksum_type: sha256
description:
  The PCP::LogSummary module provides a Perl module for using the
  statistical summary data produced by the Performance Co-Pilot
  pmlogsummary utility.  This utility produces various averages,
  minima, maxima, and other calculations based on the performance
  data stored in a PCP archive.  The Perl interface is ideal for
  exporting this data into third-party tools (e.g. spreadsheets).


pkgId: 2e46011b26b4d03029d23770024c2a9d976880411cf930cc551c2a34d2c04bc9
name: perl-PCP-MMV
arch: x86_64
version: 6.2.1
epoch: 0
release: 1.1
summary: Performance Co-Pilot (PCP) Perl bindings for PCP Memory Mapped Values
url: https://pcp.io
rpm_license: GPL-2.0+
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Other
rpm_buildhost: reproducible
rpm_sourcerpm: pcp-6.2.1-1.1.src.rpm
location_href: pcp/perl-PCP-MMV-6.2.1-1.1.x86_64.rpm
checksum_type: sha256
description:
  The PCP::MMV module contains the Perl language bindings for
  building scripts instrumented with the Performance Co-Pilot
  (PCP) Memory Mapped Value (MMV) mechanism.
  This mechanism allows arbitrary values to be exported from an
  instrumented script into the PCP infrastructure for monitoring
  and analysis with pmchart, pmie, pmlogger and other PCP tools.


pkgId: 8a33ec3b45c2c81c4d1cb7d65954a1433475c73da0ef7c4dd16484c63c7714f6
name: perl-PCP-MMV-debuginfo
arch: x86_64
version: 6.2.1
epoch: 0
release: 1.1
summary: Debug information for package perl-PCP-MMV
url: https://pcp.io
rpm_license: GPL-2.0+
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: pcp-6.2.1-1.1.src.rpm
location_href: pcp/perl-PCP-MMV-debuginfo-6.2.1-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-PCP-MMV.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: ac16cbe28aa7709ae4b25622c5264dbbb21da3320eebd80121f420816944ae0d
name: perl-PCP-PMDA
arch: x86_64
version: 6.2.1
epoch: 0
release: 1.1
summary: Performance Co-Pilot (PCP) Perl bindings and documentation
url: https://pcp.io
rpm_license: GPL-2.0+
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Other
rpm_buildhost: reproducible
rpm_sourcerpm: pcp-6.2.1-1.1.src.rpm
location_href: pcp/perl-PCP-PMDA-6.2.1-1.1.x86_64.rpm
checksum_type: sha256
description:
  The PCP::PMDA Perl module contains the language bindings for
  building Performance Metric Domain Agents (PMDAs) using Perl.
  Each PMDA exports performance data for one specific domain, for
  example the operating system kernel, Cisco routers, a database,
  an application, etc.


pkgId: b50dcf8b2cc5930cb0d6e9b0618e062784c6fcd1c994b52a72592b089b7285fa
name: perl-PCP-PMDA-debuginfo
arch: x86_64
version: 6.2.1
epoch: 0
release: 1.1
summary: Debug information for package perl-PCP-PMDA
url: https://pcp.io
rpm_license: GPL-2.0+
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: pcp-6.2.1-1.1.src.rpm
location_href: pcp/perl-PCP-PMDA-debuginfo-6.2.1-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-PCP-PMDA.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 6c6c9ed7a2ca7162fc8ae39e1b9e971f00df65dc41226f43db61ad2821ecca64
name: perl-PPIx-QuoteLike
arch: noarch
version: 0.023
epoch: 0
release: 1.1
summary: Parse Perl string literals and string-literal-like things
url: https://metacpan.org/release/PPIx-QuoteLike
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-PPIx-QuoteLike-0.023-1.1.src.rpm
location_href: perl-PPIx-QuoteLike/perl-PPIx-QuoteLike-0.023-1.1.noarch.rpm
checksum_type: sha256
description:
  This Perl class parses Perl string literals and things that are reasonably
  like string literals. Its real reason for being is to find interpolated
  variables for Perl::Critic policies and similar code.

  The parse is fairly straightforward, and a little poking around with
  _eg/pqldump_ should show how it normally goes.

  But there is at least one quote-like thing that probably needs some
  explanation.


pkgId: d7587e584e669dc0d12eafd1af5f4f6ef8c3339d2bbad9a00fe1021a45f1ab53
name: perl-PPIx-Regexp
arch: noarch
version: 0.088
epoch: 0
release: 1.1
summary: Parse regular expressions
url: https://metacpan.org/release/PPIx-Regexp
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-PPIx-Regexp-0.088-1.1.src.rpm
location_href: perl-PPIx-Regexp/perl-PPIx-Regexp-0.088-1.1.noarch.rpm
checksum_type: sha256
description:
  The purpose of the _PPIx-Regexp_ package is to parse regular expressions in
  a manner similar to the way the PPI package parses Perl. This class forms
  the root of the parse tree, playing a role similar to PPI::Document.

  This package shares with PPI the property of being round-trip safe. That
  is,

   my $expr = 's/ ( \d+ ) ( \D+ ) /$2$1/smxg';
   my $re = PPIx::Regexp->new( $expr );
   print $re->content() eq $expr ? "yes\n" : "no\n"

  should print 'yes' for any valid regular expression.

  Navigation is similar to that provided by PPI. That is to say, things like
  'children', 'find_first', 'snext_sibling' and so on all work pretty much
  the same way as in PPI.

  The class hierarchy is also similar to PPI. Except for some utility classes
  (the dumper, the lexer, and the tokenizer) all classes are descended from
  PPIx::Regexp::Element, which provides basic navigation. Tokens are
  descended from PPIx::Regexp::Token, which provides content. All containers
  are descended from PPIx::Regexp::Node, which provides for children, and all
  structure elements are descended from PPIx::Regexp::Structure, which
  provides beginning and ending delimiters, and a type.

  There are two features of PPI that this package does not provide -
  mutability and operator overloading. There are no plans for serious
  mutability, though something like PPI's 'prune' functionality might be
  considered. Similarly there are no plans for operator overloading, which
  appears to the author to represent a performance hit for little tangible
  gain.


pkgId: 1ef7938d8ef6298008014f6cd367f61c04f3994648158b50b10fd1d04390db7c
name: perl-PPIx-Utils
arch: noarch
version: 0.003
epoch: 0
release: 1.1
summary: Utility functions for PPI
url: https://metacpan.org/release/PPIx-Utils
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-PPIx-Utils-0.003-1.1.src.rpm
location_href: perl-PPIx-Utils/perl-PPIx-Utils-0.003-1.1.noarch.rpm
checksum_type: sha256
description:
  'PPIx::Utils' is a collection of utility functions for working with PPI
  documents. The functions are organized into submodules, and may be imported
  from the appropriate submodule or via this module.

  These functions were originally from Perl::Critic::Utils and related
  modules, and have been split off to this distribution for use outside of
  Perl::Critic.


pkgId: b736348d430b5c791fff6687e33386bc68970b00fff0da432740d8bd33da624b
name: perl-Package-DeprecationManager
arch: noarch
version: 0.18
epoch: 0
release: 1.1
summary: Manage deprecation warnings for your distribution
url: https://metacpan.org/release/Package-DeprecationManager
rpm_license: Artistic-2.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Package-DeprecationManager-0.18-1.1.src.rpm
location_href: perl-Package-DeprecationManager/perl-Package-DeprecationManager-0.18-1.1.noarch.rpm
checksum_type: sha256
description:
  This module allows you to manage a set of deprecations for one or more
  modules.

  When you import 'Package::DeprecationManager', you must provide a set of
  '-deprecations' as a hash ref. The keys are "feature" names, and the values
  are the version when that feature was deprecated.

  In many cases, you can simply use the fully qualified name of a subroutine
  or method as the feature name. This works for cases where the whole
  subroutine is deprecated. However, the feature names can be any string.
  This is useful if you don't want to deprecate an entire subroutine, just a
  certain usage.

  You can also provide an optional array reference in the '-ignore'
  parameter.

  The values to be ignored can be package names or regular expressions (made
  with 'qr//'). Use this to ignore packages in your distribution that can
  appear on the call stack when a deprecated feature is used.

  As part of the import process, 'Package::DeprecationManager' will export
  two subroutines into its caller. It provides an 'import()' sub for the
  caller and a 'deprecated()' sub.

  The 'import()' sub allows callers of _your_ class to specify an
  '-api_version' parameter. If this is supplied, then deprecation warnings
  are only issued for deprecations with API versions earlier than the one
  specified.

  You must call the 'deprecated()' sub in each deprecated subroutine. When
  called, it will issue a warning using 'Carp::cluck()'.

  The 'deprecated()' sub can be called in several ways. If you do not pass
  any arguments, it will generate an appropriate warning message. If you pass
  a single argument, this is used as the warning message.

  Finally, you can call it with named arguments. Currently, the only allowed
  names are 'message' and 'feature'. The 'feature' argument should correspond
  to the feature name passed in the '-deprecations' hash.

  If you don't explicitly specify a feature, the 'deprecated()' sub uses
  'caller()' to identify its caller, using its fully qualified subroutine
  name.

  A given deprecation warning is only issued once for a given package. This
  module tracks this based on both the feature name _and_ the error message
  itself. This means that if you provide several different error messages for
  the same feature, all of those errors will appear.


pkgId: 026bf2939767f5dda81eb7b91e79fbd8730a6eb18d38f51f1ff7f25504e05e5c
name: perl-Package-Stash
arch: noarch
version: 0.40
epoch: 0
release: 1.1
summary: Routines for manipulating stashes
url: https://metacpan.org/release/Package-Stash
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Package-Stash-0.40-1.1.src.rpm
location_href: perl-Package-Stash/perl-Package-Stash-0.40-1.1.noarch.rpm
checksum_type: sha256
description:
  Manipulating stashes (Perl's symbol tables) is occasionally necessary, but
  incredibly messy, and easy to get wrong. This module hides all of that
  behind a simple API.

  NOTE: Most methods in this class require a variable specification that
  includes a sigil. If this sigil is absent, it is assumed to represent the
  IO slot.

  Due to limitations in the typeglob API available to perl code, and to
  typeglob manipulation in perl being quite slow, this module provides two
  implementations - one in pure perl, and one using XS. The XS implementation
  is to be preferred for most usages; the pure perl one is provided for cases
  where XS modules are not a possibility. The current implementation in use
  can be set by setting '$ENV{PACKAGE_STASH_IMPLEMENTATION}' or
  '$Package::Stash::IMPLEMENTATION' before loading Package::Stash (with the
  environment variable taking precedence), otherwise, it will use the XS
  implementation if possible, falling back to the pure perl one.


pkgId: 783fd63844b983b47201e766f092db8f2942d3a0742854801e24edbd06106f56
name: perl-Package-Stash-XS
arch: src
version: 0.30
epoch: 0
release: 1.1
summary: Faster and more correct implementation of the Package::Stash API
url: https://metacpan.org/release/Package-Stash-XS
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
location_href: perl-Package-Stash-XS/perl-Package-Stash-XS-0.30-1.1.src.rpm
checksum_type: sha256
description:
  This is a backend for Package::Stash, which provides the functionality in a
  way that's less buggy and much faster. It will be used by default if it's
  installed, and should be preferred in all environments with a compiler.


pkgId: 892fb1d6365798ba0970f9117ed9973d33a814eee825dc39e0225dbc43bcc836
name: perl-Package-Stash-XS-debuginfo
arch: x86_64
version: 0.30
epoch: 0
release: 1.1
summary: Debug information for package perl-Package-Stash-XS
url: https://metacpan.org/release/Package-Stash-XS
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Package-Stash-XS-0.30-1.1.src.rpm
location_href: perl-Package-Stash-XS/perl-Package-Stash-XS-debuginfo-0.30-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-Package-Stash-XS.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: a41aa377c974ee32ccb3d661c79760b67467b559e80f67fef43665ac35ba4351
name: perl-Package-Stash-XS-debugsource
arch: x86_64
version: 0.30
epoch: 0
release: 1.1
summary: Debug sources for package perl-Package-Stash-XS
url: https://metacpan.org/release/Package-Stash-XS
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Package-Stash-XS-0.30-1.1.src.rpm
location_href: perl-Package-Stash-XS/perl-Package-Stash-XS-debugsource-0.30-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package perl-Package-Stash-XS.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: e7391150d41d6c354941bac61ffa8a9bb337ff39607d49d868b413d748ebbe9b
name: perl-PadWalker
arch: src
version: 2.5
epoch: 0
release: 1.1
summary: Play with other peoples' lexical variables
url: https://metacpan.org/release/PadWalker
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
location_href: perl-PadWalker/perl-PadWalker-2.5-1.1.src.rpm
checksum_type: sha256
description:
  PadWalker is a module which allows you to inspect (and even change!)
  lexical variables in any subroutine which called you. It will only show
  those variables which are in scope at the point of the call.

  PadWalker is particularly useful for debugging. It's even used by Perl's
  built-in debugger. (It can also be used for evil, of course.)

  I wouldn't recommend using PadWalker directly in production code, but it's
  your call. Some of the modules that use PadWalker internally are certainly
  safe for and useful in production.


pkgId: a286f9ae55ff6c104bc2f15b420588f333d850a23b1680701f5fe7d04a237a69
name: perl-PadWalker-debuginfo
arch: x86_64
version: 2.5
epoch: 0
release: 1.1
summary: Debug information for package perl-PadWalker
url: https://metacpan.org/release/PadWalker
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-PadWalker-2.5-1.1.src.rpm
location_href: perl-PadWalker/perl-PadWalker-debuginfo-2.5-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-PadWalker.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 59b848d0abe1c0f1a41e7377f0b191ff63f53e4ade11da5f7790921c69e9ac9d
name: perl-PadWalker-debugsource
arch: x86_64
version: 2.5
epoch: 0
release: 1.1
summary: Debug sources for package perl-PadWalker
url: https://metacpan.org/release/PadWalker
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-PadWalker-2.5-1.1.src.rpm
location_href: perl-PadWalker/perl-PadWalker-debugsource-2.5-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package perl-PadWalker.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: f8746342114a7da6d2b9c6505a0bcda7f8740c2fbd791b69955be1eba5d4ec52
name: perl-Params-Util
arch: src
version: 1.102
epoch: 0
release: 1.1
summary: Simple, compact and correct param-checking functions
url: https://metacpan.org/release/Params-Util
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
location_href: perl-Params-Util/perl-Params-Util-1.102-1.1.src.rpm
checksum_type: sha256
description:
  'Params::Util' provides a basic set of importable functions that makes
  checking parameters a hell of a lot easier

  While they can be (and are) used in other contexts, the main point behind
  this module is that the functions *both* Do What You Mean, and Do The Right
  Thing, so they are most useful when you are getting params passed into your
  code from someone and/or somewhere else and you can't really trust the
  quality.

  Thus, 'Params::Util' is of most use at the edges of your API, where params
  and data are coming in from outside your code.

  The functions provided by 'Params::Util' check in the most strictly correct
  manner known, are documented as thoroughly as possible so their exact
  behaviour is clear, and heavily tested so make sure they are not fooled by
  weird data and Really Bad Things.

  To use, simply load the module providing the functions you want to use as
  arguments (as shown in the SYNOPSIS).

  To aid in maintainability, 'Params::Util' will *never* export by default.

  You must explicitly name the functions you want to export, or use the
  ':ALL' param to just have it export everything (although this is not
  recommended if you have any _FOO functions yourself with which future
  additions to 'Params::Util' may clash)


pkgId: 5917c0cf906d94fcdabec66ca725a2b3300aa85537a103bb686b2155fe3e9482
name: perl-Params-Util-debuginfo
arch: x86_64
version: 1.102
epoch: 0
release: 1.1
summary: Debug information for package perl-Params-Util
url: https://metacpan.org/release/Params-Util
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Params-Util-1.102-1.1.src.rpm
location_href: perl-Params-Util/perl-Params-Util-debuginfo-1.102-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-Params-Util.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 75e5e95eef34864c9fe070be856e7c98d014302707981af197adb9cc94213fa0
name: perl-Params-Util-debugsource
arch: x86_64
version: 1.102
epoch: 0
release: 1.1
summary: Debug sources for package perl-Params-Util
url: https://metacpan.org/release/Params-Util
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Params-Util-1.102-1.1.src.rpm
location_href: perl-Params-Util/perl-Params-Util-debugsource-1.102-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package perl-Params-Util.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: 32adcbd036d2f34340a8681e0d96ac54e50c712f0e7dae8864af61882333caff
name: perl-Params-Validate
arch: src
version: 1.31
epoch: 0
release: 1.1
summary: Validate method/function parameters
url: https://metacpan.org/release/Params-Validate
rpm_license: Artistic-2.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
location_href: perl-Params-Validate/perl-Params-Validate-1.31-1.1.src.rpm
checksum_type: sha256
description:
  *I would recommend you consider using Params::ValidationCompiler instead.
  That module, despite being pure Perl, is _significantly_ faster than this
  one, at the cost of having to adopt a type system such as Specio,
  Type::Tiny, or the one shipped with Moose*.

  This module allows you to validate method or function call parameters to an
  arbitrary level of specificity. At the simplest level, it is capable of
  validating the required parameters were given and that no unspecified
  additional parameters were passed in.

  It is also capable of determining that a parameter is of a specific type,
  that it is an object of a certain class hierarchy, that it possesses
  certain methods, or applying validation callbacks to arguments.


pkgId: 5e50007ce0556089446a13d1283519cfba0d313ca8f427c93cb253e6beb55819
name: perl-Params-Validate-debuginfo
arch: x86_64
version: 1.31
epoch: 0
release: 1.1
summary: Debug information for package perl-Params-Validate
url: https://metacpan.org/release/Params-Validate
rpm_license: Artistic-2.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Params-Validate-1.31-1.1.src.rpm
location_href: perl-Params-Validate/perl-Params-Validate-debuginfo-1.31-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-Params-Validate.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: eea7e02f689aed1dc497838cadd63f4ca4dd94b2544ce6ded219629dadd8964a
name: perl-Params-Validate-debugsource
arch: x86_64
version: 1.31
epoch: 0
release: 1.1
summary: Debug sources for package perl-Params-Validate
url: https://metacpan.org/release/Params-Validate
rpm_license: Artistic-2.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Params-Validate-1.31-1.1.src.rpm
location_href: perl-Params-Validate/perl-Params-Validate-debugsource-1.31-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package perl-Params-Validate.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: 11aa92cddf1b8436a2a3c985609f213a1995b1766deecfe6c39cfbac57207ca3
name: perl-Params-ValidationCompiler
arch: noarch
version: 0.31
epoch: 0
release: 1.1
summary: Build an optimized subroutine parameter validator once, use it forever
url: https://metacpan.org/release/Params-ValidationCompiler
rpm_license: Artistic-2.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Params-ValidationCompiler-0.31-1.1.src.rpm
location_href: perl-Params-ValidationCompiler/perl-Params-ValidationCompiler-0.31-1.1.noarch.rpm
checksum_type: sha256
description:
  This module creates a customized, highly efficient parameter checking
  subroutine. It can handle named or positional parameters, and can return
  the parameters as key/value pairs or a list of values.

  In addition to type checks, it also supports parameter defaults, optional
  parameters, and extra "slurpy" parameters.


pkgId: df0d2147358dba016bd3314d0fd5375a41faa077ddb8ab03766405d8bfc1c555
name: perl-Parse-Yapp
arch: noarch
version: 1.21
epoch: 0
release: 1.1
summary: Perl extension for generating and using LALR parsers
url: http://search.cpan.org/dist/Parse-Yapp/
rpm_license: Artistic-1.0 or GPL-2.0+
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Parse-Yapp-1.21-1.1.src.rpm
location_href: perl-Parse-Yapp/perl-Parse-Yapp-1.21-1.1.noarch.rpm
checksum_type: sha256
description:
  Parse::Yapp (Yet Another Perl Parser compiler) is a collection of modules
  that let you generate and use yacc like thread safe (reentrant) parsers
  with perl object oriented interface.

  The script yapp is a front-end to the Parse::Yapp module and let you easily
  create a Perl OO parser from an input grammar file.


pkgId: c7fcc1ca6d66a9f2b1d9284e33f8dc00adea618accb3a98222b5878eb969df75
name: perl-Path-Class
arch: noarch
version: 0.37
epoch: 0
release: 1.1
summary: Cross-platform path specification manipulation
url: http://search.cpan.org/dist/Path-Class/
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Path-Class-0.37-1.1.src.rpm
location_href: perl-Path-Class/perl-Path-Class-0.37-1.1.noarch.rpm
checksum_type: sha256
description:
  'Path::Class' is a module for manipulation of file and directory
  specifications (strings describing their locations, like
  ''/home/ken/foo.txt'' or ''C:\Windows\Foo.txt'') in a cross-platform
  manner. It supports pretty much every platform Perl runs on, including
  Unix, Windows, Mac, VMS, Epoc, Cygwin, OS/2, and NetWare.

  The well-known module File::Spec also provides this service, but it's sort
  of awkward to use well, so people sometimes avoid it, or use it in a way
  that won't actually work properly on platforms significantly different than
  the ones they've tested their code on.

  In fact, 'Path::Class' uses 'File::Spec' internally, wrapping all the
  unsightly details so you can concentrate on your application code. Whereas
  'File::Spec' provides functions for some common path manipulations,
  'Path::Class' provides an object-oriented model of the world of path
  specifications and their underlying semantics. 'File::Spec' doesn't create
  any objects, and its classes represent the different ways in which paths
  must be manipulated on various platforms (not a very intuitive concept).
  'Path::Class' creates objects representing files and directories, and
  provides methods that relate them to each other. For instance, the
  following 'File::Spec' code:

   my $absolute = File::Spec->file_name_is_absolute(
                    File::Spec->catfile( @dirs, $file )
                  );

  can be written using 'Path::Class' as

   my $absolute = Path::Class::File->new( @dirs, $file )->is_absolute;

  or even as

   my $absolute = file( @dirs, $file )->is_absolute;

  Similar readability improvements should happen all over the place when
  using 'Path::Class'.

  Using 'Path::Class' can help solve real problems in your code too - for
  instance, how many people actually take the "volume" (like 'C:' on Windows)
  into account when writing 'File::Spec'-using code? I thought not. But if
  you use 'Path::Class', your file and directory objects will know what
  volumes they refer to and do the right thing.

  The guts of the 'Path::Class' code live in the Path::Class::File and
  Path::Class::Dir modules, so please see those modules' documentation for
  more details about how to use them.


pkgId: d2f182f59314089d4b31ff208958cbf1d93bcc13f5bb44bf33443690c00fdefb
name: perl-Path-Tiny
arch: noarch
version: 0.146.0
epoch: 0
release: 1.1
summary: File path utility
url: https://metacpan.org/release/Path-Tiny
rpm_license: Apache-2.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Path-Tiny-0.146.0-1.1.src.rpm
location_href: perl-Path-Tiny/perl-Path-Tiny-0.146.0-1.1.noarch.rpm
checksum_type: sha256
description:
  This module provides a small, fast utility for working with file paths. It
  is friendlier to use than File::Spec and provides easy access to functions
  from several other core file handling modules. It aims to be smaller and
  faster than many alternatives on CPAN, while helping people do many common
  things in consistent and less error-prone ways.

  Path::Tiny does not try to work for anything except Unix-like and Win32
  platforms. Even then, it might break if you try something particularly
  obscure or tortuous. (Quick! What does this mean:
  '///../../..//./././a//b/.././c/././'? And how does it differ on Win32?)

  All paths are forced to have Unix-style forward slashes. Stringifying the
  object gives you back the path (after some clean up).

  File input/output methods 'flock' handles before reading or writing, as
  appropriate (if supported by the platform and/or filesystem).

  The '*_utf8' methods ('slurp_utf8', 'lines_utf8', etc.) operate in raw
  mode. On Windows, that means they will not have CRLF translation from the
  ':crlf' IO layer. Installing Unicode::UTF8 0.58 or later will speed up
  '*_utf8' situations in many cases and is highly recommended. Alternatively,
  installing PerlIO::utf8_strict 0.003 or later will be used in place of the
  default ':encoding(UTF-8)'.

  This module depends heavily on PerlIO layers for correct operation and thus
  requires Perl 5.008001 or later.


pkgId: 3de9d58b8be886a33f0c37e82c8d022566d5b5522223eb0e303a3da797f3e1b4
name: perl-Perl-Critic
arch: noarch
version: 1.152.0
epoch: 0
release: 1.1
summary: Critique Perl source code for best-practices
url: https://metacpan.org/release/Perl-Critic
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Perl-Critic-1.152.0-1.1.src.rpm
location_href: perl-Perl-Critic/perl-Perl-Critic-1.152.0-1.1.noarch.rpm
checksum_type: sha256
description:
  Perl::Critic is an extensible framework for creating and applying coding
  standards to Perl source code. Essentially, it is a static source code
  analysis engine. Perl::Critic is distributed with a number of
  Perl::Critic::Policy modules that attempt to enforce various coding
  guidelines. Most Policy modules are based on Damian Conway's book *Perl
  Best Practices*. However, Perl::Critic is *not* limited to PBP and will
  even support Policies that contradict Conway. You can enable, disable, and
  customize those Polices through the Perl::Critic interface. You can also
  create new Policy modules that suit your own tastes.

  For a command-line interface to Perl::Critic, see the documentation for
  perlcritic. If you want to integrate Perl::Critic with your build process,
  Test::Perl::Critic provides an interface that is suitable for test
  programs. Also, Test::Perl::Critic::Progressive is useful for gradually
  applying coding standards to legacy code. For the ultimate convenience (at
  the expense of some flexibility) see the criticism pragma.

  If you'd like to try Perl::Critic without installing anything, there is a
  web-service available at http://perlcritic.com. The web-service does not
  yet support all the configuration features that are available in the native
  Perl::Critic API, but it should give you a good idea of what it does.

  Also, ActivePerl includes a very slick graphical interface to Perl-Critic
  called 'perlcritic-gui'. You can get a free community edition of ActivePerl
  from http://www.activestate.com.


pkgId: 2a4360da8bbc7a38c966a0f5b19e465a72d174c417498914fda0e97065e4818e
name: perl-Perl-Tidy
arch: noarch
version: 20240511.0.0
epoch: 0
release: 1.1
summary: Indent and reformat perl scripts
url: https://metacpan.org/release/Perl-Tidy
rpm_license: GPL-2.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Perl-Tidy-20240511.0.0-1.1.src.rpm
location_href: perl-Perl-Tidy/perl-Perl-Tidy-20240511.0.0-1.1.noarch.rpm
checksum_type: sha256
description:
  This module makes the functionality of the perltidy utility available to
  perl scripts. Any or all of the input parameters may be omitted, in which
  case the @ARGV array will be used to provide input parameters as described
  in the perltidy(1) man page.

  For example, the perltidy script is basically just this:

      use Perl::Tidy;
      Perl::Tidy::perltidy();

  The call to *perltidy* returns a scalar *$error_flag* which is TRUE if an
  error caused premature termination, and FALSE if the process ran to normal
  completion. Additional discuss of errors is contained below in the ERROR
  HANDLING section.


pkgId: df9f41625a8f58feadf5b538b9e6adc35216d5b9c8b8e73ca1ea1716d66cbe56
name: perl-PerlIO-utf8_strict
arch: src
version: 0.010
epoch: 0
release: 1.1
summary: Fast and correct UTF-8 IO
url: https://metacpan.org/release/PerlIO-utf8_strict
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
location_href: perl-PerlIO-utf8_strict/perl-PerlIO-utf8_strict-0.010-1.1.src.rpm
checksum_type: sha256
description:
  This module provides a fast and correct UTF-8 PerlIO layer. Unlike perl's
  default ':utf8' layer it checks the input for correctness.


pkgId: 449bfd5f510413b14e28286c5c8e7a365a3ae9a9b5caf198be10af6b737a7455
name: perl-PerlIO-utf8_strict-debuginfo
arch: x86_64
version: 0.010
epoch: 0
release: 1.1
summary: Debug information for package perl-PerlIO-utf8_strict
url: https://metacpan.org/release/PerlIO-utf8_strict
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-PerlIO-utf8_strict-0.010-1.1.src.rpm
location_href: perl-PerlIO-utf8_strict/perl-PerlIO-utf8_strict-debuginfo-0.010-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-PerlIO-utf8_strict.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: c9cb233ad6463bcad9152ea5dfad305d45bca2ddd271e5377c5b09d120f64f0a
name: perl-PerlIO-utf8_strict-debugsource
arch: x86_64
version: 0.010
epoch: 0
release: 1.1
summary: Debug sources for package perl-PerlIO-utf8_strict
url: https://metacpan.org/release/PerlIO-utf8_strict
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-PerlIO-utf8_strict-0.010-1.1.src.rpm
location_href: perl-PerlIO-utf8_strict/perl-PerlIO-utf8_strict-debugsource-0.010-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package perl-PerlIO-utf8_strict.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: b2cbb79a9f3170d8241a7d33aca810129654886677ef10521868e4893f12c874
name: perl-PerlMagick
arch: x86_64
version: 7.1.1.34
epoch: 0
release: 1.1
summary: Perl interface for ImageMagick
url: https://imagemagick.org/
rpm_license: ImageMagick
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: ImageMagick-7.1.1.34-1.1.src.rpm
location_href: ImageMagick/perl-PerlMagick-7.1.1.34-1.1.x86_64.rpm
checksum_type: sha256
description:
  PerlMagick is an objected-oriented Perl interface to ImageMagick. Use
  the module to read, manipulate, or write an image or image sequence
  from within a Perl script. This makes it suitable for Web CGI scripts.


pkgId: d1f8fa788d5bfeda500144c3c120e214e9ccefd0a92560ada1facb385ff98ab3
name: perl-PerlMagick-debuginfo
arch: x86_64
version: 7.1.1.34
epoch: 0
release: 1.1
summary: Debug information for package perl-PerlMagick
url: https://imagemagick.org/
rpm_license: ImageMagick
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: ImageMagick-7.1.1.34-1.1.src.rpm
location_href: ImageMagick/perl-PerlMagick-debuginfo-7.1.1.34-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-PerlMagick.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 6bc5d5184cbb0449cad09496b9a4670333568b8b8a2d4da1b4730c270d0a2284
name: perl-Pod-Coverage
arch: noarch
version: 0.23
epoch: 0
release: 1.1
summary: Checks if the documentation of a module is comprehensive
url: https://metacpan.org/release/Pod-Coverage
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Pod-Coverage-0.23-1.1.src.rpm
location_href: perl-Pod-Coverage/perl-Pod-Coverage-0.23-1.1.noarch.rpm
checksum_type: sha256
description:
  Developers hate writing documentation. They'd hate it even more if their
  computer tattled on them, but maybe they'll be even more thankful in the
  long run. Even if not, _perlmodstyle_ tells you to, so you must obey.

  This module provides a mechanism for determining if the pod for a given
  module is comprehensive.

  It expects to find either a '=head(n>1)' or an '=item' block documenting a
  subroutine.

  Consider: # an imaginary Foo.pm package Foo;

   =item foo

   The foo sub

   = cut

   sub foo {}
   sub bar {}

   1;
   __END__

  In this example 'Foo::foo' is covered, but 'Foo::bar' is not, so the 'Foo'
  package is only 50% (0.5) covered


pkgId: 075789bd69642ed7d333c1f49939480a0dea341c445835edc91a9dd906950574
name: perl-Pod-Coverage-TrustPod
arch: noarch
version: 0.100006
epoch: 0
release: 1.1
summary: Allow a module's pod to contain Pod::Coverage hints
url: https://metacpan.org/release/Pod-Coverage-TrustPod
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Pod-Coverage-TrustPod-0.100006-1.1.src.rpm
location_href: perl-Pod-Coverage-TrustPod/perl-Pod-Coverage-TrustPod-0.100006-1.1.noarch.rpm
checksum_type: sha256
description:
  This is a Pod::Coverage subclass (actually, a subclass of
  Pod::Coverage::CountParents) that allows the POD itself to declare certain
  symbol names trusted.

  Here is a sample Perl module:

    package Foo::Bar;

    =head1 NAME

    Foo::Bar - a bar at which fooes like to drink

    =head1 METHODS

    =head2 fee

    returns the bar tab

    =cut

    sub fee { ... }

    =head2 fie

    scoffs at bar tab

    =cut

    sub fie { ... }

    sub foo { ... }

    =begin Pod::Coverage

      foo

    =end Pod::Coverage

    =cut

  This file would report full coverage, because any non-empty lines inside a
  block of POD targeted to Pod::Coverage are treated as 'trustme' patterns.
  Leading and trailing whitespace is stripped and the remainder is treated as
  a regular expression anchored at both ends.

  Remember, anywhere you could use '=begin' and '=end' as above, you could
  instead write:

    =for Pod::Coverage foo

  In some cases, you may wish to make the entire file trusted. The special
  pattern '*EVERYTHING*' may be provided to do just this.

  Keep in mind that Pod::Coverage::TrustPod sets up exceptions using the
  "trust" mechanism rather than the "privacy" mechanism in Pod::Coverage.
  This is unlikely ever to matter to you, but it's true.


pkgId: 7ce50ea1c31a4644529b1e2a2ba7147552030bded46e27b73e666b9b8dc86c1a
name: perl-Pod-Eventual
arch: noarch
version: 0.094003
epoch: 0
release: 1.1
summary: Read a POD document as a series of trivial events
url: https://metacpan.org/release/Pod-Eventual
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Pod-Eventual-0.094003-1.1.src.rpm
location_href: perl-Pod-Eventual/perl-Pod-Eventual-0.094003-1.1.noarch.rpm
checksum_type: sha256
description:
  POD is a pretty simple format to write, but it can be a big pain to deal
  with reading it and doing anything useful with it. Most existing POD
  parsers care about semantics, like whether a '=item' occurred after an
  '=over' but before a 'back', figuring out how to link a 'L<>', and other
  things like that.

  Pod::Eventual is much less ambitious and much more stupid. Fortunately,
  stupid is often better. (That's what I keep telling myself, anyway.)

  Pod::Eventual reads line-based input and produces events describing each
  POD paragraph or directive it finds. Once complete events are immediately
  passed to the 'handle_event' method. This method should be implemented by
  Pod::Eventual subclasses. If it isn't, Pod::Eventual's own 'handle_event'
  will be called, and will raise an exception.


pkgId: 2498c9626e74265a6d8461c15703d26f8ac10dd07330a3e393e68e96d67af544
name: perl-Pod-Parser
arch: noarch
version: 1.670.0
epoch: 0
release: 1.1
summary: Modules for parsing/translating POD format documents
url: https://metacpan.org/release/Pod-Parser
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Pod-Parser-1.670.0-1.1.src.rpm
location_href: perl-Pod-Parser/perl-Pod-Parser-1.670.0-1.1.noarch.rpm
checksum_type: sha256
description:
  *NOTE: This module is considered legacy; modern Perl releases (5.31.1 and
  higher) are going to remove Pod-Parser from core and use Pod::Simple for
  all things POD.*

  *Pod::Parser* is a base class for creating POD filters and translators. It
  handles most of the effort involved with parsing the POD sections from an
  input stream, leaving subclasses free to be concerned only with performing
  the actual translation of text.

  *Pod::Parser* parses PODs, and makes method calls to handle the various
  components of the POD. Subclasses of *Pod::Parser* override these methods
  to translate the POD into whatever output format they desire.


pkgId: d9245b98f4d519ebf78ef0bd1b7c85a7b50f7c2375c774faae7a391041e1a893
name: perl-Pod-Spell
arch: noarch
version: 1.26
epoch: 0
release: 1.1
summary: Formatter for spellchecking Pod
url: https://metacpan.org/release/Pod-Spell
rpm_license: Artistic-2.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Pod-Spell-1.26-1.1.src.rpm
location_href: perl-Pod-Spell/perl-Pod-Spell-1.26-1.1.noarch.rpm
checksum_type: sha256
description:
  Pod::Spell is a Pod formatter whose output is good for spellchecking.
  Pod::Spell is rather like Pod::Text, except that it doesn't put much effort
  into actual formatting, and it suppresses things that look like Perl
  symbols or Perl jargon (so that your spellchecking program won't complain
  about mystery words like "'$thing'" or "'Foo::Bar'" or "hashref").

  This class works by filtering out words that look like Perl or any form of
  computerese (like "'$thing'" or "'N>7'" or "'@{$foo}{'bar','baz'}'",
  anything in C<...> or F<...> codes, anything in verbatim paragraphs (code
  blocks), and anything in the stopword list. The default stopword list for a
  document starts out from the stopword list defined by Pod::Wordlist, and
  can be supplemented (on a per-document basis) by having '"=for stopwords"'
  / '"=for :stopwords"' region(s) in a document.


pkgId: 49b6e52d1f0405c9af27023e997ac97450d6dbae7406e205869309b85f6e430b
name: perl-Protocol-HTTP2
arch: noarch
version: 1.110.0
epoch: 0
release: 1.1
summary: HTTP/2 protocol implementation (RFC 7540)
url: https://metacpan.org/release/Protocol-HTTP2
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Protocol-HTTP2-1.110.0-1.1.src.rpm
location_href: perl-Protocol-HTTP2/perl-Protocol-HTTP2-1.110.0-1.1.noarch.rpm
checksum_type: sha256
description:
  Protocol::HTTP2 is HTTP/2 protocol implementation (at
  https://tools.ietf.org/html/rfc7540) with stateful decoders/encoders of
  HTTP/2 frames. You may use this module to implement your own HTTP/2
  client/server/intermediate on top of your favorite event loop over plain or
  tls socket (see examples).


pkgId: 86d7aa213a1524d49bbb13d69e5e3a8d7ca2714b208624dde3e459e09de47328
name: perl-RPC-XML
arch: noarch
version: 0.82
epoch: 0
release: 1.1
summary: Set of classes for core data, message and XML handling
url: https://metacpan.org/release/RPC-XML
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-RPC-XML-0.82-1.1.src.rpm
location_href: perl-RPC-XML/perl-RPC-XML-0.82-1.1.noarch.rpm
checksum_type: sha256
description:
  The *RPC::XML* package is an implementation of the *XML-RPC* standard. The
  package as a whole provides classes for data, for clients, for servers and
  for parsers (based on the XML::Parser and XML::LibXML packages from CPAN).

  This module provides a set of classes for creating values to pass to the
  constructors for requests and responses. These are lightweight objects,
  most of which are implemented as blessed scalar references so as to
  associate specific type information with the value. Classes are also
  provided for requests, responses and faults (errors).

  This module does not actually provide any transport implementation or
  server basis. For these, see RPC::XML::Client and RPC::XML::Server,
  respectively.


pkgId: 693457c1edeb323f164b9de45615f54d3062f09f5b644b29cb1b4bc0dd9fd1ac
name: perl-Readonly-XS
arch: src
version: 1.05
epoch: 0
release: 1.1
summary: Companion module for Readonly.pm, to speed up read-only scalar variables
url: http://search.cpan.org/dist/Readonly-XS/
rpm_license: GPL-2.0+
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
location_href: perl-Readonly-XS/perl-Readonly-XS-1.05-1.1.src.rpm
checksum_type: sha256
description:
  This is a companion module to Readonly.pm.  You do not use
  Readonly::XS directly.  Instead, once it is installed, Readonly.pm
  will detect this and will use it for creating read-only scalars.  This
  results in a significant speed improvement.  This does not speed up
  read-only arrays or hashes.

  Authors:
  --------
      Eric Roode, <roode@cpan.org>


pkgId: 1ebaa52f7b440d873523af3bb8202c4a107554075ae5bea5b8fa80383baeaba0
name: perl-Readonly-XS-debuginfo
arch: x86_64
version: 1.05
epoch: 0
release: 1.1
summary: Debug information for package perl-Readonly-XS
url: http://search.cpan.org/dist/Readonly-XS/
rpm_license: GPL-2.0+
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Readonly-XS-1.05-1.1.src.rpm
location_href: perl-Readonly-XS/perl-Readonly-XS-debuginfo-1.05-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-Readonly-XS.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 4192a6a24c57fe4c5c7959f338f7ff03a6006264b12f40597064bbbd3ff19beb
name: perl-Readonly-XS-debugsource
arch: x86_64
version: 1.05
epoch: 0
release: 1.1
summary: Debug sources for package perl-Readonly-XS
url: http://search.cpan.org/dist/Readonly-XS/
rpm_license: GPL-2.0+
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Readonly-XS-1.05-1.1.src.rpm
location_href: perl-Readonly-XS/perl-Readonly-XS-debugsource-1.05-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package perl-Readonly-XS.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: 4b81fa2824a8b48a13a6b0a21ea74b5ba1ab0b0824e8c591aeb8d45c0312469e
name: perl-Regexp-Common
arch: noarch
version: 2017060201
epoch: 0
release: 1.1
summary: Provide commonly requested regular expressions
url: http://search.cpan.org/dist/Regexp-Common/
rpm_license: Artistic-1.0 or Artistic-2.0 or BSD-3-Clause or MIT
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Regexp-Common-2017060201-1.1.src.rpm
location_href: perl-Regexp-Common/perl-Regexp-Common-2017060201-1.1.noarch.rpm
checksum_type: sha256
description:
  By default, this module exports a single hash ('%RE') that stores or
  generates commonly needed regular expressions (see "List of available
  patterns").

  There is an alternative, subroutine-based syntax described in
  "Subroutine-based interface".


pkgId: 876af38e042ff87116ed77c994a8533534ff09cf4475bd99ef4458cde89e56d4
name: perl-SGMLS
arch: src
version: 1.1
epoch: 0
release: 1.1
summary: SGML/XML Parsers
url: https://metacpan.org/release/RAAB/SGMLSpm-1.1
rpm_license: GPL-2.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Productivity/Publishing/SGML
rpm_buildhost: reproducible
location_href: perl-SGMLS/perl-SGMLS-1.1-1.1.src.rpm
checksum_type: sha256
description:
  SGMLSpm is a Perl script that reads ESIS output (from parsers like SP)
  and offers an event-based interface to the parser. As long as the
  parser can parse XML this also works for XML.


pkgId: d1e86cd8bd3a0c9605b4096b332d7e29259141cddd26f6c3c8e30f1ffe2ec869
name: perl-SNMP-debuginfo
arch: x86_64
version: 5.9.4
epoch: 0
release: 1.1
summary: Debug information for package perl-SNMP
url: https://sourceforge.net/projects/net-snmp
rpm_license: GPL-2.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: net-snmp-5.9.4-1.1.src.rpm
location_href: net-snmp/perl-SNMP-debuginfo-5.9.4-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-SNMP.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 72ae1d031faa6962a0a2be3f784cfee5d0d33227e3c0f9161ff151393e15d839
name: perl-Scalar-List-Utils-debuginfo
arch: x86_64
version: 1.63
epoch: 0
release: 1.1
summary: Debug information for package perl-Scalar-List-Utils
url: https://metacpan.org/release/Scalar-List-Utils
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Scalar-List-Utils-1.63-1.1.src.rpm
location_href: perl-Scalar-List-Utils/perl-Scalar-List-Utils-debuginfo-1.63-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-Scalar-List-Utils.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 73158b437e73f440f0b71248d56d9ff48a6acc70e1bf7f226e17c302f0835a2a
name: perl-Scalar-List-Utils-debugsource
arch: x86_64
version: 1.63
epoch: 0
release: 1.1
summary: Debug sources for package perl-Scalar-List-Utils
url: https://metacpan.org/release/Scalar-List-Utils
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Scalar-List-Utils-1.63-1.1.src.rpm
location_href: perl-Scalar-List-Utils/perl-Scalar-List-Utils-debugsource-1.63-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package perl-Scalar-List-Utils.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: 94f6e43a10778075d2e03a02003bb44d8c07c1d27117e3cfeaf56ef0ba3907bf
name: perl-Scope-Guard
arch: noarch
version: 0.21
epoch: 0
release: 1.1
summary: Lexically-Scoped Resource Management
url: http://search.cpan.org/dist/Scope-Guard/
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Scope-Guard-0.21-1.1.src.rpm
location_href: perl-Scope-Guard/perl-Scope-Guard-0.21-1.1.noarch.rpm
checksum_type: sha256
description:
  This module provides a convenient way to perform cleanup or other forms of
  resource management at the end of a scope. It is particularly useful when
  dealing with exceptions: the 'Scope::Guard' constructor takes a reference
  to a subroutine that is guaranteed to be called even if the thread of
  execution is aborted prematurely. This effectively allows lexically-scoped
  "promises" to be made that are automatically honoured by perl's garbage
  collector.

  For more information, see: the http://www.drdobbs.com/cpp/184403758 manpage


pkgId: 414cd2e5af3beef6fe335ab6f0a48398416ca4a4a0a8ddfebef834d4b84d7d6c
name: perl-Socket6
arch: src
version: 0.29
epoch: 0
release: 1.1
summary: IPv6 related part of the C socket.h defines and structure manipulators
url: https://metacpan.org/release/Socket6
rpm_license: BSD-3-Clause
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
location_href: perl-Socket6/perl-Socket6-0.29-1.1.src.rpm
checksum_type: sha256
description:
  This module provides glue routines to the various IPv6 functions.

  If you use the Socket6 module, be sure to specify "use Socket" as well as
  "use Socket6".


pkgId: 10b6e27bdabb50d4fbedd3c86eb44fe00694a562ce720caea75d05c8fa21c195
name: perl-Socket6-debuginfo
arch: x86_64
version: 0.29
epoch: 0
release: 1.1
summary: Debug information for package perl-Socket6
url: https://metacpan.org/release/Socket6
rpm_license: BSD-3-Clause
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Socket6-0.29-1.1.src.rpm
location_href: perl-Socket6/perl-Socket6-debuginfo-0.29-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-Socket6.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 7ddfc1180a5ef29aea3d9e9076de780bd3097d956ce9da248a83ba4d994f0284
name: perl-Socket6-debugsource
arch: x86_64
version: 0.29
epoch: 0
release: 1.1
summary: Debug sources for package perl-Socket6
url: https://metacpan.org/release/Socket6
rpm_license: BSD-3-Clause
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Socket6-0.29-1.1.src.rpm
location_href: perl-Socket6/perl-Socket6-debugsource-0.29-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package perl-Socket6.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: 0c8d112e6849920c61f2139c760592f5915fa248568cd127d048c0caaeba240d
name: perl-Sort-Key
arch: src
version: 1.33
epoch: 0
release: 1.1
summary: the fastest way to sort anything in Perl
url: http://search.cpan.org/dist/Sort-Key/
rpm_license: GPL-1.0+ or Artistic-1.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
location_href: perl-Sort-Key/perl-Sort-Key-1.33-1.1.src.rpm
checksum_type: sha256
description:
  Sort::Key provides a set of functions to sort lists of values by some
  calculated key value.

  It is faster (usually *much faster*) and uses less memory than other
  alternatives implemented around perl sort function (ST, GRT, etc.).

  Multi-key sorting functionality is also provided via the companion modules
  the Sort::Key::Multi manpage, the Sort::Key::Maker manpage and the
  Sort::Key::Register manpage.


pkgId: bdf3d19f4c2322902326e039c57b8c97b8d5af86b516695f2efdc0646e6d2314
name: perl-Sort-Key-debuginfo
arch: x86_64
version: 1.33
epoch: 0
release: 1.1
summary: Debug information for package perl-Sort-Key
url: http://search.cpan.org/dist/Sort-Key/
rpm_license: GPL-1.0+ or Artistic-1.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Sort-Key-1.33-1.1.src.rpm
location_href: perl-Sort-Key/perl-Sort-Key-debuginfo-1.33-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-Sort-Key.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 9f46f79768172aeb1b489e96a2ce4c8bba6300e19df5b5489890470fa741a74f
name: perl-Sort-Key-debugsource
arch: x86_64
version: 1.33
epoch: 0
release: 1.1
summary: Debug sources for package perl-Sort-Key
url: http://search.cpan.org/dist/Sort-Key/
rpm_license: GPL-1.0+ or Artistic-1.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Sort-Key-1.33-1.1.src.rpm
location_href: perl-Sort-Key/perl-Sort-Key-debugsource-1.33-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package perl-Sort-Key.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: 4e2bf9904140d58211eea6ae6135dabfd6ab1601c6816913d5adb11f7ce09254
name: perl-Sort-Versions
arch: noarch
version: 1.62
epoch: 0
release: 1.1
summary: Perl 5 Module for Sorting of Revision-Like Numbers
url: http://search.cpan.org/dist/Sort-Versions/
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Sort-Versions-1.62-1.1.src.rpm
location_href: perl-Sort-Versions/perl-Sort-Versions-1.62-1.1.noarch.rpm
checksum_type: sha256
description:
  Sort::Versions allows easy sorting of mixed non-numeric and numeric
  strings, like the 'version numbers' that many shared library systems and
  revision control packages use. This is quite useful if you are trying to
  deal with shared libraries. It can also be applied to applications that
  intersperse variable-width numeric fields within text. Other applications
  can undoubtedly be found.

  For an explanation of the algorithm, it's simplest to look at these
  examples:

    1.1   <  1.2
    1.1a  <  1.2
    1.1   <  1.1.1
    1.1   <  1.1a
    1.1.a <  1.1a
    1     <  a
    a     <  b
    1     <  2
    1.1-3 <  1.1-4
    1.1-5 <  1.1.6

  More precisely (but less comprehensibly), the two strings are treated as
  subunits delimited by periods or hyphens. Each subunit can contain any
  number of groups of digits or non-digits. If digit groups are being
  compared on both sides, a numeric comparison is used, otherwise a ASCII
  ordering is used. A group or subgroup with more units will win if all
  comparisons are equal. A period binds digit groups together more tightly
  than a hyphen.

  Some packages use a different style of version numbering: a simple real
  number written as a decimal. Sort::Versions has limited support for this
  style: when comparing two subunits which are both digit groups, if either
  subunit has a leading zero, then both are treated like digits after a
  decimal point. So for example:

    0002  <  1
    1.06  <  1.5

  This won39t always work, because there won39t always be a leading zero in
  real-number style version numbers. There is no way for Sort::Versions to
  know which style was intended. But a lot of the time it will do the right
  thing. If you are making up version numbers, the style with (possibly) more
  than one dot is the style to use.


pkgId: 4bf1715f806a1e9012be19126414ebae80e106fa1f9296231855e0e2c5768bcb
name: perl-Specio
arch: noarch
version: 0.48
epoch: 0
release: 1.1
summary: Type constraints and coercions for Perl
url: https://metacpan.org/release/Specio
rpm_license: Artistic-2.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Specio-0.48-1.1.src.rpm
location_href: perl-Specio/perl-Specio-0.48-1.1.noarch.rpm
checksum_type: sha256
description:
  The 'Specio' distribution provides classes for representing type
  constraints and coercion, along with syntax sugar for declaring them.

  Note that this is not a proper type system for Perl. Nothing in this
  distribution will magically make the Perl interpreter start checking a
  value's type on assignment to a variable. In fact, there's no built-in way
  to apply a type to a variable at all.

  Instead, you can explicitly check a value against a type, and optionally
  coerce values to that type.

  My long-term goal is to replace Moose's built-in types and MooseX::Types
  with this module.


pkgId: e49a99e5a195b03fba69f320b1816b28cf3a96e0af688a80719247523959c5a8
name: perl-Spiffy
arch: noarch
version: 0.46
epoch: 0
release: 1.1
summary: Spiffy Perl Interface Framework For You
url: http://search.cpan.org/dist/Spiffy/
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Spiffy-0.46-1.1.src.rpm
location_href: perl-Spiffy/perl-Spiffy-0.46-1.1.noarch.rpm
checksum_type: sha256
description:
  "Spiffy" is a framework and methodology for doing object oriented (OO)
  programming in Perl. Spiffy combines the best parts of Exporter.pm,
  base.pm, mixin.pm and SUPER.pm into one magic foundation class. It attempts
  to fix all the nits and warts of traditional Perl OO, in a clean,
  straightforward and (perhaps someday) standard way.

  Spiffy borrows ideas from other OO languages like Python, Ruby, Java and
  Perl 6. It also adds a few tricks of its own.

  If you take a look on CPAN, there are a ton of OO related modules. When
  starting a new project, you need to pick the set of modules that makes most
  sense, and then you need to use those modules in each of your classes.
  Spiffy, on the other hand, has everything you'll probably need in one
  module, and you only need to use it once in one of your classes. If you
  make Spiffy.pm the base class of the basest class in your project, Spiffy
  will automatically pass all of its magic to all of your subclasses. You may
  eventually forget that you're even using it!

  The most striking difference between Spiffy and other Perl object oriented
  base classes, is that it has the ability to export things. If you create a
  subclass of Spiffy, all the things that Spiffy exports will automatically
  be exported by your subclass, in addition to any more things that you want
  to export. And if someone creates a subclass of your subclass, all of those
  things will be exported automatically, and so on. Think of it as "Inherited
  Exportation", and it uses the familiar Exporter.pm specification syntax.

  To use Spiffy or any subclass of Spiffy as a base class of your class, you
  specify the '-base' argument to the 'use' command.

      use MySpiffyBaseModule -base;

  You can also use the traditional 'use base 'MySpiffyBaseModule';' syntax
  and everything will work exactly the same. The only caveat is that
  Spiffy.pm must already be loaded. That's because Spiffy rewires base.pm on
  the fly to do all the Spiffy magics.

  Spiffy has support for Ruby-like mixins with Perl6-like roles. Just like
  'base' you can use either of the following invocations:

      use mixin 'MySpiffyBaseModule';
      use MySpiffyBaseModule -mixin;

  The second version will only work if the class being mixed in is a subclass
  of Spiffy. The first version will work in all cases, as long as Spiffy has
  already been loaded.

  To limit the methods that get mixed in, use roles. (Hint: they work just
  like an Exporter list):

      use MySpiffyBaseModule -mixin => qw(:basics x y !foo);

  In object oriented Perl almost every subroutine is a method. Each method
  gets the object passed to it as its first argument. That means practically
  every subroutine starts with the line:

      my $self = shift;

  Spiffy provides a simple, optional filter mechanism to insert that line for
  you, resulting in cleaner code. If you figure an average method has 10
  lines of code, that's 10% of your code! To turn this option on, you just
  use the '- Base' option instead of the '-base' option, or add the
  '-selfless' option. If source filtering makes you queazy, don't use the
  feature. I personally find it addictive in my quest for writing squeaky
  clean, maintainable code.

  A useful feature of Spiffy is that it exports two functions: 'field' and
  'const' that can be used to declare the attributes of your class, and
  automatically generate accessor methods for them. The only difference
  between the two functions is that 'const' attributes can not be modified;
  thus the accessor is much faster.

  One interesting aspect of OO programming is when a method calls the same
  method from a parent class. This is generally known as calling a super
  method. Perl's facility for doing this is butt ugly:

      sub cleanup {
          my $self = shift;
          $self->scrub;
          $self->SUPER::cleanup(@_);
      }

  Spiffy makes it, er, super easy to call super methods. You just use the
  'super' function. You don't need to pass it any arguments because it
  automatically passes them on for you. Here's the same function with Spiffy:

      sub cleanup {
          $self->scrub;
          super;
      }

  Spiffy has a special method for parsing arguments called 'parse_arguments',
  that it also uses for parsing its own arguments. You declare which
  arguments are boolean (singletons) and which ones are paired, with two
  special methods called 'boolean_arguments' and 'paired_arguments'. Parse
  arguments pulls out the booleans and pairs and returns them in an anonymous
  hash, followed by a list of the unmatched arguments.

  Finally, Spiffy can export a few debugging functions 'WWW', 'XXX', 'YYY'
  and 'ZZZ'. Each of them produces a YAML dump of its arguments. WWW warns
  the output, XXX dies with the output, YYY prints the output, and ZZZ
  confesses the output. If YAML doesn't suit your needs, you can switch all
  the dumps to Data::Dumper format with the '-dumper' option.

  That's Spiffy!


pkgId: e0db46d903d8cb38cf99d17dd5148aace150f44a909c599368add45f8c6603a5
name: perl-Spreadsheet-ParseExcel
arch: noarch
version: 0.660.0
epoch: 0
release: 1.1
summary: Read information from an Excel file
url: https://metacpan.org/release/Spreadsheet-ParseExcel
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Spreadsheet-ParseExcel-0.660.0-1.1.src.rpm
location_href: perl-Spreadsheet-ParseExcel/perl-Spreadsheet-ParseExcel-0.660.0-1.1.noarch.rpm
checksum_type: sha256
description:
  The Spreadsheet::ParseExcel module can be used to read information from
  Excel 95-2003 binary files.

  The module cannot read files in the Excel 2007 Open XML XLSX format. See
  the Spreadsheet::XLSX module instead.


pkgId: 36ce68a309066bc2cf0e18cc8020ac1a483cd71c191771fd0629e274abe42cd2
name: perl-String-Format
arch: noarch
version: 1.18
epoch: 0
release: 1.1
summary: Sprintf-Like String Formatting Capabilities With
url: http://search.cpan.org/dist/String-Format/
rpm_license: GPL-2.0-only
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-String-Format-1.18-1.1.src.rpm
location_href: perl-String-Format/perl-String-Format-1.18-1.1.noarch.rpm
checksum_type: sha256
description:
  String::Format lets you define arbitrary printf-like format sequences to be
  expanded. This module would be most useful in configuration files and
  reporting tools, where the results of a query need to be formatted in a
  particular way. It was inspired by mutt's index_format and related
  directives (see
  <URL:http://www.mutt.org/doc/manual/manual-6.html#index_format>).


pkgId: 1191d448d8b0fc851ff72d6c2273294356b52dd945852b0538b941c8255f5e36
name: perl-Sub-Exporter-Progressive
arch: noarch
version: 0.001013
epoch: 0
release: 1.1
summary: Only use Sub::Exporter if you need it
url: http://search.cpan.org/dist/Sub-Exporter-Progressive/
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Sub-Exporter-Progressive-0.001013-1.1.src.rpm
location_href: perl-Sub-Exporter-Progressive/perl-Sub-Exporter-Progressive-0.001013-1.1.noarch.rpm
checksum_type: sha256
description:
  Sub::Exporter is an incredibly powerful module, but with that power comes
  great responsibility, er- as well as some runtime penalties. This module is
  a 'Sub::Exporter' wrapper that will let your users just use Exporter if all
  they are doing is picking exports, but use 'Sub::Exporter' if your users
  try to use 'Sub::Exporter''s more advanced features, like renaming exports,
  if they try to use them.

  Note that this module will export '@EXPORT', '@EXPORT_OK' and
  '%EXPORT_TAGS' package variables for 'Exporter' to work. Additionally, if
  your package uses advanced 'Sub::Exporter' features like currying, this
  module will only ever use 'Sub::Exporter', so you might as well use it
  directly.


pkgId: ac47e9d0874cf7f9a81e59eb038d58b4728baad94781a1cc1cf6c68602798626
name: perl-Sub-Identify
arch: src
version: 0.14
epoch: 0
release: 1.1
summary: Retrieve names of code references
url: http://search.cpan.org/dist/Sub-Identify/
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
location_href: perl-Sub-Identify/perl-Sub-Identify-0.14-1.1.src.rpm
checksum_type: sha256
description:
  'Sub::Identify' allows you to retrieve the real name of code references.

  It provides six functions, all of them taking a code reference.

  'sub_name' returns the name of the code reference passed as an argument (or
  '__ANON__' if it's an anonymous code reference), 'stash_name' returns its
  package, and 'sub_fullname' returns the concatenation of the two.

  'get_code_info' returns a list of two elements, the package and the
  subroutine name (in case of you want both and are worried by the speed.)

  In case of subroutine aliasing, those functions always return the original
  name.

  'get_code_location' returns a two-element list containing the file name and
  the line number where the subroutine has been defined.

  'is_sub_constant' returns a boolean value indicating whether the subroutine
  is a constant or not.


pkgId: 2f7fd6dc454f3c910af89b6d9bbada796b1ba87dafe9c664b651693e2a987bcc
name: perl-Sub-Identify-debuginfo
arch: x86_64
version: 0.14
epoch: 0
release: 1.1
summary: Debug information for package perl-Sub-Identify
url: http://search.cpan.org/dist/Sub-Identify/
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Sub-Identify-0.14-1.1.src.rpm
location_href: perl-Sub-Identify/perl-Sub-Identify-debuginfo-0.14-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-Sub-Identify.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: e94d974109125532316bfefe648dd68a1efb2e941466fcf552d6fabb423b8543
name: perl-Sub-Identify-debugsource
arch: x86_64
version: 0.14
epoch: 0
release: 1.1
summary: Debug sources for package perl-Sub-Identify
url: http://search.cpan.org/dist/Sub-Identify/
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Sub-Identify-0.14-1.1.src.rpm
location_href: perl-Sub-Identify/perl-Sub-Identify-debugsource-0.14-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package perl-Sub-Identify.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: a42893ee159386d396b7cac5c4656a04d5478792daa83ac1d1d5289712d55a40
name: perl-Sub-Install
arch: noarch
version: 0.929
epoch: 0
release: 1.1
summary: Install subroutines into packages easily
url: https://metacpan.org/release/Sub-Install
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Sub-Install-0.929-1.1.src.rpm
location_href: perl-Sub-Install/perl-Sub-Install-0.929-1.1.noarch.rpm
checksum_type: sha256
description:
  This module makes it easy to install subroutines into packages without the
  unsightly mess of 'no strict' or typeglobs lying about where just anyone
  can see them.


pkgId: 9071698a0caa8dceeaf442538cd649dd4e90a28424cb3049e89a7c4083c1f4b6
name: perl-Sub-Uplevel
arch: noarch
version: 0.2800
epoch: 0
release: 1.1
summary: Apparently run a function in a higher stack frame
url: https://metacpan.org/release/Sub-Uplevel
rpm_license: GPL-1.0-or-later OR Artistic-1.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Sub-Uplevel-0.2800-1.1.src.rpm
location_href: perl-Sub-Uplevel/perl-Sub-Uplevel-0.2800-1.1.noarch.rpm
checksum_type: sha256
description:
  Like Tcl's uplevel() function, but not quite so dangerous. The idea is
  just to fool caller(). All the really naughty bits of Tcl's uplevel()
  are avoided.


pkgId: e9bd7f63c3f92e8c04bbe656590a09a208fc1ea171ca76ccdde8f12a0017b851
name: perl-Switch
arch: noarch
version: 2.17
epoch: 0
release: 1.1
summary: A switch statement for Perl, do not use if you can use given/when
url: http://search.cpan.org/dist/Switch/
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Switch-2.17-1.1.src.rpm
location_href: perl-Switch/perl-Switch-2.17-1.1.noarch.rpm
checksum_type: sha256
description:
  The Switch.pm module implements a generalized case mechanism that covers
  most (but not all) of the numerous possible combinations of switch and case
  values described above.

  The module augments the standard Perl syntax with two new control
  statements: 'switch' and 'case'. The 'switch' statement takes a single
  scalar argument of any type, specified in parentheses. 'switch' stores this
  value as the current switch value in a (localized) control variable. The
  value is followed by a block which may contain one or more Perl statements
  (including the 'case' statement described below). The block is
  unconditionally executed once the switch value has been cached.

  A 'case' statement takes a single scalar argument (in mandatory parentheses
  if it's a variable; otherwise the parens are optional) and selects the
  appropriate type of matching between that argument and the current switch
  value. The type of matching used is determined by the respective types of
  the switch value and the 'case' argument, as specified in Table 1. If the
  match is successful, the mandatory block associated with the 'case'
  statement is executed.

  In most other respects, the 'case' statement is semantically identical to
  an 'if' statement. For example, it can be followed by an 'else' clause, and
  can be used as a postfix statement qualifier.

  However, when a 'case' block has been executed control is automatically
  transferred to the statement after the immediately enclosing 'switch'
  block, rather than to the next statement within the block. In other words,
  the success of any 'case' statement prevents other cases in the same scope
  from executing. But see the "Allowing fall-through" manpage below.

  Together these two new statements provide a fully generalized case
  mechanism:

          use Switch;

          

          %special = ( woohoo => 1,  d'oh => 1 );

          while (<>) {
  	    chomp;
              switch ($_) {
                  case (%special) { print "homer\n"; }      # if $special{$_}
                  case /[a-z]/i   { print "alpha\n"; }      # if $_ =~ /a-z/i
                  case [1..9]     { print "small num\n"; }  # if $_ in [1..9]
                  case { $_[0] >= 10 } { print "big num\n"; } # if $_ >= 10
                  print "must be punctuation\n" case /\W/;  # if $_ ~= /\W/
  	    }
          }

  Note that 'switch'es can be nested within 'case' (or any other) blocks, and
  a series of 'case' statements can try different types of matches -- hash
  membership, pattern match, array intersection, simple equality, etc. --
  against the same switch value.

  The use of intersection tests against an array reference is particularly
  useful for aggregating integral cases:

          sub classify_digit
          {
                  switch ($_[0]) { case 0            { return 'zero' }
                                   case [2,4,6,8]    { return 'even' }
                                   case [1,3,5,7,9]  { return 'odd' }
                                   case /[A-F]/i     { return 'hex' }
                                 }
          }


pkgId: 5e5b3399c28d80483caeb0ddd341533c58810bd1532a403776674af32d7986c1
name: perl-Syntax-Keyword-Try
arch: src
version: 0.290.0
epoch: 0
release: 1.1
summary: Try/catch/finally syntax for perl
url: https://metacpan.org/release/Syntax-Keyword-Try
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
location_href: perl-Syntax-Keyword-Try/perl-Syntax-Keyword-Try-0.290.0-1.1.src.rpm
checksum_type: sha256
description:
  This module provides a syntax plugin that implements exception-handling
  semantics in a form familiar to users of other languages, being built on a
  block labeled with the 'try' keyword, followed by at least one of a 'catch'
  or 'finally' block.

  As well as providing a handy syntax for this useful behaviour, this module
  also serves to contain a number of code examples for how to implement
  parser plugins and manipulate optrees to provide new syntax and behaviours
  for perl code.

  Syntax similar to this module has now been added to core perl, starting at
  version 5.34.0. If you are writing new code, it is suggested that you
  instead use the Feature::Compat::Try module instead, as that will enable
  the core feature on those supported perl versions, falling back to
  'Syntax::Keyword::Try' on older perls.


pkgId: 18e27fa8f4aaa0efe6deb4a8911ca8766245d202c1fc87023209fc336c7abd1a
name: perl-Syntax-Keyword-Try-debuginfo
arch: x86_64
version: 0.290.0
epoch: 0
release: 1.1
summary: Debug information for package perl-Syntax-Keyword-Try
url: https://metacpan.org/release/Syntax-Keyword-Try
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Syntax-Keyword-Try-0.290.0-1.1.src.rpm
location_href: perl-Syntax-Keyword-Try/perl-Syntax-Keyword-Try-debuginfo-0.290.0-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-Syntax-Keyword-Try.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: f63076bdc14f11b34d5688c868f6dc8871ff56b14047b1aa2ecf37c7de3457c2
name: perl-Syntax-Keyword-Try-debugsource
arch: x86_64
version: 0.290.0
epoch: 0
release: 1.1
summary: Debug sources for package perl-Syntax-Keyword-Try
url: https://metacpan.org/release/Syntax-Keyword-Try
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Syntax-Keyword-Try-0.290.0-1.1.src.rpm
location_href: perl-Syntax-Keyword-Try/perl-Syntax-Keyword-Try-debugsource-0.290.0-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package perl-Syntax-Keyword-Try.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: dd9e29e3ecfe60adc6cd41cf16e63e3e7c2236c4e03c2d0c890079e6ea5e6742
name: perl-Task-Weaken
arch: noarch
version: 1.06
epoch: 0
release: 1.1
summary: Ensure that a platform has weaken support
url: https://metacpan.org/release/Task-Weaken
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Task-Weaken-1.06-1.1.src.rpm
location_href: perl-Task-Weaken/perl-Task-Weaken-1.06-1.1.noarch.rpm
checksum_type: sha256
description:
  One recurring problem in modules that use Scalar::Util's 'weaken' function
  is that it is not present in the pure-perl variant.

  While this isn't necessarily always a problem in a straight CPAN-based Perl
  environment, some operating system distributions only include the pure-Perl
  versions, don't include the XS version, and so weaken is then "missing"
  from the platform, *despite* passing a dependency on Scalar::Util
  successfully.

  Most notably this is RedHat Linux at time of writing, but other come and go
  and do the same thing, hence "recurring problem".

  The normal solution is to manually write tests in each distribution to
  ensure that 'weaken' is available.

  This restores the functionality testing to a dependency you do once in your
  _Makefile.PL_, rather than something you have to write extra tests for each
  time you write a module.

  It should also help make the package auto-generators for the various
  operating systems play more nicely, because it introduces a dependency that
  they *have* to have a proper weaken in order to work.


pkgId: fde6238457ecbc5342a6dc5f02690ebc95976f39fe74dad486ca9d9d99ba7b35
name: perl-Term-ReadKey
arch: src
version: 2.38
epoch: 0
release: 1.1
summary: Module for Simple Terminal Control
url: https://metacpan.org/pod/Term::ReadKey
rpm_license: GPL-1.0-or-later OR Artistic-1.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
location_href: perl-Term-ReadKey/perl-Term-ReadKey-2.38-1.1.src.rpm
checksum_type: sha256
description:
  This module, ReadKey, provides ioctl control for terminals and Win32 consoles
  so the input modes can be changed (thus allowing reads of a single character at
  a time), and also provides non-blocking reads of stdin, as well as several
  other terminal related features, including retrieval/modification of the screen
  size, and retrieval/modification of the control characters.


pkgId: cbb4a24de85ec580e25fd8238f1edf5d78e6475292b40179fe9db346ad84e80e
name: perl-Term-ReadKey-debuginfo
arch: x86_64
version: 2.38
epoch: 0
release: 1.1
summary: Debug information for package perl-Term-ReadKey
url: https://metacpan.org/pod/Term::ReadKey
rpm_license: GPL-1.0-or-later OR Artistic-1.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Term-ReadKey-2.38-1.1.src.rpm
location_href: perl-Term-ReadKey/perl-Term-ReadKey-debuginfo-2.38-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-Term-ReadKey.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 95ed87d7f6998d3ab000995b5aaed343efba241600c98d0ec52913adf6768d60
name: perl-Term-ReadKey-debugsource
arch: x86_64
version: 2.38
epoch: 0
release: 1.1
summary: Debug sources for package perl-Term-ReadKey
url: https://metacpan.org/pod/Term::ReadKey
rpm_license: GPL-1.0-or-later OR Artistic-1.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Term-ReadKey-2.38-1.1.src.rpm
location_href: perl-Term-ReadKey/perl-Term-ReadKey-debugsource-2.38-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package perl-Term-ReadKey.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: 633e33d1e67186cf0d803a923b6e64d658cae4d254b4fd2bb18c52b4e014478b
name: perl-Test-Base
arch: noarch
version: 0.89
epoch: 0
release: 1.1
summary: Data Driven Testing Framework
url: http://search.cpan.org/dist/Test-Base/
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Test-Base-0.89-1.1.src.rpm
location_href: perl-Test-Base/perl-Test-Base-0.89-1.1.noarch.rpm
checksum_type: sha256
description:
  Testing is usually the ugly part of Perl module authoring. Perl gives you a
  standard way to run tests with Test::Harness, and basic testing primitives
  with Test::More. After that you are pretty much on your own to develop a
  testing framework and philosophy. Test::More encourages you to make your
  own framework by subclassing Test::Builder, but that is not trivial.

  Test::Base gives you a way to write your own test framework base class that
  _is_ trivial. In fact it is as simple as two lines:

      package MyTestFramework;
      use Test::Base -Base;

  A module called 'MyTestFramework.pm' containing those two lines, will give
  all the power of Test::More and all the power of Test::Base to every test
  file that uses it. As you build up the capabilities of 'MyTestFramework',
  your tests will have all of that power as well.

  'MyTestFramework' becomes a place for you to put all of your reusable
  testing bits. As you write tests, you will see patterns and duplication,
  and you can "upstream" them into 'MyTestFramework'. Of course, you don't
  have to subclass Test::Base at all. You can use it directly in many
  applications, including everywhere you would use Test::More.

  Test::Base concentrates on offering reusable data driven patterns, so that
  you can write tests with a minimum of code. At the heart of all testing you
  have inputs, processes and expected outputs. Test::Base provides some clean
  ways for you to express your input and expected output data, so you can
  spend your

        time focusing on that rather than your code scaffolding.


pkgId: b1a1c679d5bea5d925cb9acba02c44c291332a83b9ebac04e010c315466308ba
name: perl-Test-CPAN-Meta
arch: noarch
version: 0.25
epoch: 0
release: 1.1
summary: Validate your CPAN META.yml files
url: http://search.cpan.org/dist/Test-CPAN-Meta/
rpm_license: Artistic-2.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Test-CPAN-Meta-0.25-1.1.src.rpm
location_href: perl-Test-CPAN-Meta/perl-Test-CPAN-Meta-0.25-1.1.noarch.rpm
checksum_type: sha256
description:
  This distribution was written to ensure that a META.yml file, provided with
  a standard distribution uploaded to CPAN, meets the specifications that are
  slowly being introduced to module uploads, via the use of package makers
  and installers such as the ExtUtils::MakeMaker manpage, the Module::Build
  manpage and the Module::Install manpage.

  See the CPAN::Meta manpage for further details of the CPAN Meta
  Specification.


pkgId: abb9aa5cae3880ab114441b64bce302cc1be39883a0354ffd9fcfefc8259a26d
name: perl-Test-Cmd
arch: noarch
version: 1.09
epoch: 0
release: 1.1
summary: Perl module for portable testing of commands and scripts
url: http://search.cpan.org/dist/Test-Cmd/
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Test-Cmd-1.09-1.1.src.rpm
location_href: perl-Test-Cmd/perl-Test-Cmd-1.09-1.1.noarch.rpm
checksum_type: sha256
description:
  The 'Test::Cmd' module provides a low-level framework for portable
  automated testing of executable commands and scripts (in any language, not
  just Perl), especially commands and scripts that interact with the file
  system.

  The 'Test::Cmd' module makes no assumptions about what constitutes a
  successful or failed test. Attempting to read a file that doesn't exist,
  for example, may or may not be an error, depending on the software being
  tested.

  Consequently, no 'Test::Cmd' methods (including the 'new()' method) exit,
  die or throw any other sorts of exceptions (but they all do return useful
  error indications). Exceptions or other error status should be handled by a
  higher layer: a subclass of the Test::Cmd manpage, or another testing
  framework such as the the Test manpage or the Test::Simple manpage Perl
  modules, or by the test itself.

  (That said, see the the Test::Cmd::Common manpage module if you want a
  similar module that provides exception handling, either to use directly in
  your own tests, or as an example of how to use 'Test::Cmd'.)

  In addition to running tests and evaluating conditions, the 'Test::Cmd'
  module manages and cleans up one or more temporary workspace directories,
  and provides methods for creating files and directories in those workspace
  directories from in-line data (that is, here-documents), allowing tests to
  be completely self-contained. When used in conjunction with another testing
  framework, the 'Test::Cmd' module can function as a _fixture_ (common
  startup code for multiple tests) for simple management of command execution
  and temporary workspaces.

  The 'Test::Cmd' module inherits the File::Spec manpage methods
  ('file_name_is_absolute()', 'catfile()', etc.) to support writing tests
  portably across a variety of operating and file systems.

  A 'Test::Cmd' environment object is created via the usual invocation:

      $test = Test::Cmd->new();

  Arguments to the 'Test::Cmd::new' method are keyword-value pairs that may
  be used to initialize the object, typically by invoking the same-named
  method as the keyword.


pkgId: 09ec3c6e172a64b2cbd296b18a290287c7ddc85d46e996ffd5be227e4b9a56de
name: perl-Test-Deep
arch: noarch
version: 1.204
epoch: 0
release: 1.1
summary: Extremely flexible deep comparison
url: https://metacpan.org/release/Test-Deep
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Test-Deep-1.204-1.1.src.rpm
location_href: perl-Test-Deep/perl-Test-Deep-1.204-1.1.noarch.rpm
checksum_type: sha256
description:
  If you don't know anything about automated testing in Perl then you should
  probably read about Test::Simple and Test::More before preceding.
  Test::Deep uses the Test::Builder framework.

  Test::Deep gives you very flexible ways to check that the result you got is
  the result you were expecting. At its simplest it compares two structures
  by going through each level, ensuring that the values match, that arrays
  and hashes have the same elements and that references are blessed into the
  correct class. It also handles circular data structures without getting
  caught in an infinite loop.

  Where it becomes more interesting is in allowing you to do something
  besides simple exact comparisons. With strings, the 'eq' operator checks
  that 2 strings are exactly equal but sometimes that's not what you want.
  When you don't know exactly what the string should be but you do know some
  things about how it should look, 'eq' is no good and you must use pattern
  matching instead. Test::Deep provides pattern matching for complex data
  structures

  Test::Deep has *_a lot_* of exports. See EXPORTS below.


pkgId: ef6eacdf5f9fdf109600a1436dcd1aaf5b6be34abf59fc2aa1066bc850c0c730
name: perl-Test-Differences
arch: noarch
version: 0.710.0
epoch: 0
release: 1.1
summary: Test strings and data structures and show differences if not ok
url: https://metacpan.org/release/Test-Differences
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Test-Differences-0.710.0-1.1.src.rpm
location_href: perl-Test-Differences/perl-Test-Differences-0.710.0-1.1.noarch.rpm
checksum_type: sha256
description:
  When the code you're testing returns multiple lines, records or data
  structures and they're just plain wrong, an equivalent to the Unix 'diff'
  utility may be just what's needed. Here's output from an example test
  script that checks two text documents and then two (trivial) data
  structures:

   t/99example....1..3
   not ok 1 - differences in text
   
   
   
   
   
   
   
   
   not ok 2 - differences in whitespace
   
   
   
   
   
   
   
   
   not ok 3
   
   
   
   
   
   
   
   
   

  eq_or_diff_...() compares two strings or (limited) data structures and
  either emits an ok indication or a side-by-side diff. Test::Differences is
  designed to be used with Test.pm and with Test::Simple, Test::More, and
  other Test::Builder based testing modules. As the SYNOPSIS shows, another
  testing module must be used as the basis for your test suite.


pkgId: 30aefb2f2588971a0c48bfe559401b1f0f82f9df36a68b1cfc74ada07518195d
name: perl-Test-EOL
arch: noarch
version: 2.02
epoch: 0
release: 1.1
summary: Check the correct line endings in your project
url: https://metacpan.org/release/Test-EOL
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Test-EOL-2.02-1.1.src.rpm
location_href: perl-Test-EOL/perl-Test-EOL-2.02-1.1.noarch.rpm
checksum_type: sha256
description:
  This module scans your project/distribution for any perl files (scripts,
  modules, etc) for the presence of windows line endings.


pkgId: a99b5eae9a48c15828a54ecc3a37211c56421bf27dcba0adf87b80759c09c96a
name: perl-Test-Exception
arch: noarch
version: 0.430000
epoch: 0
release: 1.1
summary: Test exception-based code
url: http://search.cpan.org/dist/Test-Exception/
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Test-Exception-0.430000-1.1.src.rpm
location_href: perl-Test-Exception/perl-Test-Exception-0.430000-1.1.noarch.rpm
checksum_type: sha256
description:
  This module provides a few convenience methods for testing exception based
  code. It is built with Test::Builder and plays happily with Test::More and
  friends.

  If you are not already familiar with Test::More now would be the time to go
  take a look.

  You can specify the test plan when you 'use Test::Exception' in the same
  way as 'use Test::More'. See Test::More for details.

  NOTE: Test::Exception only checks for exceptions. It will ignore other
  methods of stopping program execution - including exit(). If you have an
  exit() in evalled code Test::Exception will not catch this with any of its
  testing functions.

  NOTE: This module uses Sub::Uplevel and relies on overriding
  'CORE::GLOBAL::caller' to hide your test blocks from the call stack. If
  this use of global overrides concerns you, the Test::Fatal module offers a
  more minimalist alternative.

  * *throws_ok*

  Tests to see that a specific exception is thrown. throws_ok() has two
  forms:

    throws_ok BLOCK REGEX, TEST_DESCRIPTION
    throws_ok BLOCK CLASS, TEST_DESCRIPTION

  In the first form the test passes if the stringified exception matches the
  give regular expression. For example:

      throws_ok { read_file( 'unreadable' ) } qr/No file/, 'no file';

  If your perl does not support 'qr//' you can also pass a regex-like string,
  for example:

      throws_ok { read_file( 'unreadable' ) } '/No file/', 'no file';

  The second form of throws_ok() test passes if the exception is of the same
  class as the one supplied, or a subclass of that class. For example:

      throws_ok { $foo->bar } "Error::Simple", 'simple error';

  Will only pass if the 'bar' method throws an Error::Simple exception, or a
  subclass of an Error::Simple exception.

  You can get the same effect by passing an instance of the exception you
  want to look for. The following is equivalent to the previous example:

      my $SIMPLE = Error::Simple->new;
      throws_ok { $foo->bar } $SIMPLE, 'simple error';

  Should a throws_ok() test fail it produces appropriate diagnostic messages.
  For example:

      not ok 3 - simple error
      
      
      

  Like all other Test::Exception functions you can avoid prototypes by
  passing a subroutine explicitly:

      throws_ok( sub {$foo->bar}, "Error::Simple", 'simple error' );

  A true value is returned if the test succeeds, false otherwise. On exit $@
  is guaranteed to be the cause of death (if any).

  A description of the exception being checked is used if no optional test
  description is passed.

  NOTE: Remember when you 'die $string_without_a_trailing_newline' perl will
  automatically add the current script line number, input line number and a
  newline. This will form part of the string that throws_ok regular
  expressions match against.

  * *dies_ok*

  Checks that a piece of code dies, rather than returning normally. For
  example:

      sub div {
          my ( $a, $b ) = @_;
          return $a / $b;
      };

      dies_ok { div( 1, 0 ) } 'divide by zero detected';

      
      dies_ok( sub { div( 1, 0 ) }, 'divide by zero detected' );

  A true value is returned if the test succeeds, false otherwise. On exit $@
  is guaranteed to be the cause of death (if any).

  Remember: This test will pass if the code dies for any reason. If you care
  about the reason it might be more sensible to write a more specific test
  using throws_ok().

  The test description is optional, but recommended.

  * *lives_ok*

  Checks that a piece of code doesn't die. This allows your test script to
  continue, rather than aborting if you get an unexpected exception. For
  example:

      sub read_file {
          my $file = shift;
          local $/;
          open my $fh, '<', $file or die "open failed ($!)\n";
          $file = <FILE>;
          return $file;
      };

      my $file;
      lives_ok { $file = read_file('test.txt') } 'file read';

      
      lives_ok( sub { $file = read_file('test.txt') }, 'file read' );

  Should a lives_ok() test fail it produces appropriate diagnostic messages.
  For example:

      not ok 1 - file read
      
      

  A true value is returned if the test succeeds, false otherwise. On exit $@
  is guaranteed to be the cause of death (if any).

  The test description is optional, but recommended.

  * *lives_and*

  Run a test that may throw an exception. For example, instead of doing:

    my $file;
    lives_ok { $file = read_file('answer.txt') } 'read_file worked';
    is $file, "42", 'answer was 42';

  You can use lives_and() like this:

    lives_and { is read_file('answer.txt'), "42" } 'answer is 42';
    
    lives_and(sub {is read_file('answer.txt'), "42"}, 'answer is 42');

  Which is the same as doing

    is read_file('answer.txt'), "42\n", 'answer is 42';

  unless 'read_file('answer.txt')' dies, in which case you get the same kind
  of error as lives_ok()

    not ok 1 - answer is 42
    
    

  A true value is returned if the test succeeds, false otherwise. On exit $@
  is guaranteed to be the cause of death (if any).

  The test description is optional, but recommended.


pkgId: 45c0d17cd37b541059efbbac36f9b5e8b481dc722312c49b55f7a1d0a5a4496a
name: perl-Test-Fatal
arch: noarch
version: 0.017
epoch: 0
release: 1.1
summary: Incredibly simple helpers for testing code with exceptions
url: https://metacpan.org/release/Test-Fatal
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Test-Fatal-0.017-1.1.src.rpm
location_href: perl-Test-Fatal/perl-Test-Fatal-0.017-1.1.noarch.rpm
checksum_type: sha256
description:
  Test::Fatal is an alternative to the popular Test::Exception. It does much
  less, but should allow greater flexibility in testing exception-throwing
  code with about the same amount of typing.

  It exports one routine by default: 'exception'.

  *Achtung!* 'exception' intentionally does not manipulate the call stack.
  User-written test functions that use 'exception' must be careful to avoid
  false positives if exceptions use stack traces that show arguments. For a
  more magical approach involving globally overriding 'caller', see
  Test::Exception.


pkgId: 912b1a84a349e311e59e0a5b0f33b9950a8eece37755c0f9d9a763db41bb3093
name: perl-Test-File
arch: src
version: 1.993
epoch: 0
release: 1.1
summary: Test file attributes
url: https://metacpan.org/release/Test-File
rpm_license: Artistic-2.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
location_href: perl-Test-File/perl-Test-File-1.993-1.1.src.rpm
checksum_type: sha256
description:
  This modules provides a collection of test utilities for file attributes.

  Some file attributes depend on the owner of the process testing the file in
  the same way the file test operators do. For instance, root (or super-user
  or Administrator) may always be able to read files no matter the
  permissions.

  Some attributes don't make sense outside of Unix, either, so some tests
  automatically skip if they think they won't work on the platform. If you
  have a way to make these functions work on Windows, for instance, please
  send me a patch. :) If you want to pretend to be Windows on a non-Windows
  machine (for instance, to test 'skip()'), you can set the
  'PRETEND_TO_BE_WINDOWS' environment variable.

  The optional NAME parameter for every function allows you to specify a name
  for the test. If not supplied, a reasonable default will be generated.


pkgId: 0cc304eb7015647207fdd64214282b4bcb58f7dab711d73c5ac148343140e2f7
name: perl-Test-File-ShareDir
arch: noarch
version: 1.001002
epoch: 0
release: 1.1
summary: Create a Fake ShareDir for your modules for testing
url: http://search.cpan.org/dist/Test-File-ShareDir/
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Test-File-ShareDir-1.001002-1.1.src.rpm
location_href: perl-Test-File-ShareDir/perl-Test-File-ShareDir-1.001002-1.1.noarch.rpm
checksum_type: sha256
description:
  'Test::File::ShareDir' is some low level plumbing to enable a distribution
  to perform tests while consuming its own 'share' directories in a manner
  similar to how they will be once installed.

  This allows 'File::ShareDir' to see the _latest_ version of content instead
  of simply whatever is installed on whichever target system you happen to be
  testing on.

  *Note:* This module only has support for creating 'new' style share dirs
  and are NOT compatible with old File::ShareDirs.

  For this reason, unless you have File::ShareDir 1.00 or later installed,
  this module will not be usable by you.


pkgId: b4f925ac4df29afe497b6a269cdc69070d7034dad8e8fab473b324b401e2e1b4
name: perl-Test-Inter
arch: noarch
version: 1.110.0
epoch: 0
release: 1.1
summary: Framework for more readable interactive test scripts
url: https://metacpan.org/release/Test-Inter
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Test-Inter-1.110.0-1.1.src.rpm
location_href: perl-Test-Inter/perl-Test-Inter-1.110.0-1.1.noarch.rpm
checksum_type: sha256
description:
  This is another framework for writing test scripts. Much of the syntax is
  loosely inspired by Test::More, and Test::Inter has most of it's
  functionality, but it is not a drop-in replacement.

  Test::More (and other existing test frameworks) suffer from two weaknesses,
  both of which have prevented me from ever using them:

     None offer the ability to access specific tests in
     a reasonably interactive fashion, primarily for
     debugging purposes

     None offer the ability to write the tests in
     whatever format would make the tests the most
     readable

  The way I write and use test scripts, existing Test::* modules are not
  nearly as useful as they could be.


pkgId: 9bcabbf861ddba2785d41c83e7dc5a2937a568549bea47641d37c3f1c44ec5a3
name: perl-Test-LeakTrace
arch: src
version: 0.17
epoch: 0
release: 1.1
summary: Traces memory leaks
url: https://metacpan.org/release/Test-LeakTrace
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
location_href: perl-Test-LeakTrace/perl-Test-LeakTrace-0.17-1.1.src.rpm
checksum_type: sha256
description:
  'Test::LeakTrace' provides several functions that trace memory leaks. This
  module scans arenas, the memory allocation system, so it can detect any
  leaked SVs in given blocks.

  *Leaked SVs* are SVs which are not released after the end of the scope they
  have been created. These SVs include global variables and internal caches.
  For example, if you call a method in a tracing block, perl might prepare a
  cache for the method. Thus, to trace true leaks, 'no_leaks_ok()' and
  'leaks_cmp_ok()' executes a block more than once.


pkgId: 5808d30616252e1e54ea15bad42f883dfc6e9507bbfebdfe5a7f1fcee84578f3
name: perl-Test-LeakTrace-debuginfo
arch: x86_64
version: 0.17
epoch: 0
release: 1.1
summary: Debug information for package perl-Test-LeakTrace
url: https://metacpan.org/release/Test-LeakTrace
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Test-LeakTrace-0.17-1.1.src.rpm
location_href: perl-Test-LeakTrace/perl-Test-LeakTrace-debuginfo-0.17-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-Test-LeakTrace.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 7432b284f65c611a701daecb49c0377c1bb04911b114e17385514593a97d6d89
name: perl-Test-LeakTrace-debugsource
arch: x86_64
version: 0.17
epoch: 0
release: 1.1
summary: Debug sources for package perl-Test-LeakTrace
url: https://metacpan.org/release/Test-LeakTrace
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Test-LeakTrace-0.17-1.1.src.rpm
location_href: perl-Test-LeakTrace/perl-Test-LeakTrace-debugsource-0.17-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package perl-Test-LeakTrace.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: 9fca165fd5fff5ff2643ad93c30435ae8338606cefac101b1aa8352338dd7f25
name: perl-Test-Needs
arch: noarch
version: 0.002010
epoch: 0
release: 1.1
summary: Skip tests when modules not available
url: https://metacpan.org/release/Test-Needs
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Test-Needs-0.002010-1.1.src.rpm
location_href: perl-Test-Needs/perl-Test-Needs-0.002010-1.1.noarch.rpm
checksum_type: sha256
description:
  Skip test scripts if modules are not available. The requested modules will
  be loaded, and optionally have their versions checked. If the module is
  missing, the test script will be skipped. Modules that are found but fail
  to compile will exit with an error rather than skip.

  If used in a subtest, the remainder of the subtest will be skipped.

  Skipping will work even if some tests have already been run, or if a plan
  has been declared.

  Versions are checked via a '$module->VERSION($wanted_version)' call.
  Versions must be provided in a format that will be accepted. No extra
  processing is done on them.

  If 'perl' is used as a module, the version is checked against the running
  perl version ($]). The version can be specified as a number, dotted-decimal
  string, v-string, or version object.

  If the 'RELEASE_TESTING' environment variable is set, the tests will fail
  rather than skip. Subtests will be aborted, but the test script will
  continue running after that point.


pkgId: db79455b2de4913bc2e35200d7e8aa4bf5d2d188c0de799b99edce1e30e14085
name: perl-Test-NoTabs
arch: noarch
version: 2.02
epoch: 0
release: 1.1
summary: Check the presence of tabs in your project
url: http://search.cpan.org/dist/Test-NoTabs/
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Test-NoTabs-2.02-1.1.src.rpm
location_href: perl-Test-NoTabs/perl-Test-NoTabs-2.02-1.1.noarch.rpm
checksum_type: sha256
description:
  This module scans your project/distribution for any perl files (scripts,
  modules, etc) for the presence of tabs.


pkgId: 54b38fbf9f8a1e4206f96ad8dbba9e392c8927b1e74513a9fb6bfe08517576f2
name: perl-Test-NoWarnings
arch: noarch
version: 1.06
epoch: 0
release: 1.1
summary: Make sure you didn't emit any warnings while testing
url: https://metacpan.org/release/Test-NoWarnings
rpm_license: LGPL-2.1-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Test-NoWarnings-1.06-1.1.src.rpm
location_href: perl-Test-NoWarnings/perl-Test-NoWarnings-1.06-1.1.noarch.rpm
checksum_type: sha256
description:
  In general, your tests shouldn't produce warnings. This modules causes any
  warnings to be captured and stored. It automatically adds an extra test
  that will run when your script ends to check that there were no warnings.
  If there were any warnings, the test will give a "not ok" and diagnostics
  of where, when and what the warning was, including a stack trace of what
  was going on when the it occurred.

  If some of your tests *are supposed to* produce warnings then you should be
  capturing and checking them with Test::Warn, that way Test::NoWarnings will
  not see them and so not complain.

  The test is run by an 'END' block in Test::NoWarnings. It will not be run
  when any forked children exit.


pkgId: 78586bb41d567a8001e534733c91dadff17f8b2571ae9c26715ea82c1361e013
name: perl-Test-Object
arch: noarch
version: 0.08
epoch: 0
release: 1.1
summary: Thoroughly testing objects via registered handlers
url: http://search.cpan.org/dist/Test-Object/
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Test-Object-0.08-1.1.src.rpm
location_href: perl-Test-Object/perl-Test-Object-0.08-1.1.noarch.rpm
checksum_type: sha256
description:
  In situations where you have deep trees of classes, there is a common
  situation in which you test a module 4 or 5 subclasses down, which should
  follow the correct behaviour of not just the subclass, but of all the
  parent classes.

  This should be done to ensure that the implementation of a subclass has not
  somehow "broken" the object's behaviour in a more general sense.

  'Test::Object' is a testing package designed to allow you to easily test
  what you believe is a valid object against the expected behaviour of *all*
  of the classes in its inheritance tree in one single call.

  To do this, you "register" tests (in the form of CODE or function
  references) with 'Test::Object', with each test associated with a
  particular class.

  When you call 'object_ok' in your test script, 'Test::Object' will check
  the object against all registered tests. For each class that your object
  responds to '$object->isa($class)' for, the appropriate testing function
  will be called.

  Doing it this way allows adapter objects and other things that respond to
  'isa' differently that the default to still be tested against the classes
  that it is advertising itself as correctly.

  This also means that more than one test might be "counted" for each call to
  'object_ok'. You should account for this correctly in your expected test
  count.


pkgId: 5403bd1fd7ef8c934259dc0c18efd989745815c9d1949eb75523c5e1f97f1809
name: perl-Test-Output
arch: noarch
version: 1.034
epoch: 0
release: 1.1
summary: Utilities to test STDOUT and STDERR messages
url: https://metacpan.org/release/Test-Output
rpm_license: Artistic-2.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Test-Output-1.034-1.1.src.rpm
location_href: perl-Test-Output/perl-Test-Output-1.034-1.1.noarch.rpm
checksum_type: sha256
description:
  Test::Output provides a simple interface for testing output sent to
  'STDOUT' or 'STDERR'. A number of different utilities are included to try
  and be as flexible as possible to the tester.

  Likewise, Capture::Tiny provides a much more robust capture mechanism
  without than the original Test::Output::Tie.


pkgId: 678819176e3cc14e2ab8aba4ca76532bc367c31e5a1b04eec54addf445d41702
name: perl-Test-Pod-Coverage
arch: noarch
version: 1.10
epoch: 0
release: 1.1
summary: Check for pod coverage in your distribution.
url: http://search.cpan.org/dist/Test-Pod-Coverage/
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Test-Pod-Coverage-1.10-1.1.src.rpm
location_href: perl-Test-Pod-Coverage/perl-Test-Pod-Coverage-1.10-1.1.noarch.rpm
checksum_type: sha256
description:
  Test::Pod::Coverage is used to create a test for your distribution, to
  ensure that all relevant files in your distribution are appropriately
  documented in pod.

  Can also be called with the Pod::Coverage manpage parms.

      use Test::Pod::Coverage tests=>1;
      pod_coverage_ok(
          "Foo::Bar",
          { also_private => [ qr/^[A-Z_]+$/ ], },
          "Foo::Bar, with all-caps functions as privates",
      );

  The the Pod::Coverage manpage parms are also useful for subclasses that
  don't re-document the parent class's methods. Here's an example from the
  Mail::SRS manpage.

      pod_coverage_ok( "Mail::SRS" ); # No exceptions

      
      my $trustme = { trustme => [qr/^(new|parse|compile)$/] };
      pod_coverage_ok( "Mail::SRS::DB", $trustme );
      pod_coverage_ok( "Mail::SRS::Guarded", $trustme );
      pod_coverage_ok( "Mail::SRS::Reversable", $trustme );
      pod_coverage_ok( "Mail::SRS::Shortcut", $trustme );

  Alternately, you could use the Pod::Coverage::CountParents manpage, which
  always allows a subclass to reimplement its parents' methods without
  redocumenting them. For example:

      my $trustparents = { coverage_class => 'Pod::Coverage::CountParents' };
      pod_coverage_ok( "IO::Handle::Frayed", $trustparents );

  (The 'coverage_class' parameter is not passed to the coverage class with
  other parameters.)

  If you want POD coverage for your module, but don't want to make
  Test::Pod::Coverage a prerequisite for installing, create the following as
  your _t/pod-coverage.t_ file:

      use Test::More;
      eval "use Test::Pod::Coverage";
      plan skip_all => "Test::Pod::Coverage required for testing pod coverage" if $@;

      plan tests => 1;
      pod_coverage_ok( "Pod::Master::Html");

  Finally, Module authors can include the following in a _t/pod-coverage.t_
  file and have 'Test::Pod::Coverage' automatically find and check all
  modules in the module distribution:

      use Test::More;
      eval "use Test::Pod::Coverage 1.00";
      plan skip_all => "Test::Pod::Coverage 1.00 required for testing POD coverage" if $@;
      all_pod_coverage_ok();


pkgId: e0a29bfbf1b143bbd87dcdf91c2f986fec2e78631a0c5497da2a1c44aae1a171
name: perl-Test-Requires
arch: noarch
version: 0.11
epoch: 0
release: 1.1
summary: Checks to see if the module can be loaded
url: https://metacpan.org/release/Test-Requires
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Test-Requires-0.11-1.1.src.rpm
location_href: perl-Test-Requires/perl-Test-Requires-0.11-1.1.noarch.rpm
checksum_type: sha256
description:
  Test::Requires checks to see if the module can be loaded.

  If this fails rather than failing tests this *skips all tests*.

  Test::Requires can also be used to require a minimum version of Perl:

      use Test::Requires "5.010";  # quoting is necessary!!

      
      use Test::Requires "v5.10";


pkgId: 0a156eb44f14f1128a7d124ba0e8b67a85874ae96351400a4f9d318da0987355
name: perl-Test-RequiresInternet
arch: noarch
version: 0.05
epoch: 0
release: 1.1
summary: Easily test network connectivity
url: http://search.cpan.org/dist/Test-RequiresInternet/
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Test-RequiresInternet-0.05-1.1.src.rpm
location_href: perl-Test-RequiresInternet/perl-Test-RequiresInternet-0.05-1.1.noarch.rpm
checksum_type: sha256
description:
  This module is intended to easily test network connectivity before
  functional tests begin to non-local Internet resources. It does not require
  any modules beyond those supplied in core Perl.

  If you do not specify a host/port pair, then the module defaults to using
  'www.google.com' on port '80'.

  You may optionally specify the port by its name, as in 'http' or 'ldap'. If
  you do this, the test module will attempt to look up the port number using
  'getservbyname'.

  If you do specify a host and port, they must be specified in *pairs*. It is
  a fatal error to omit one or the other.

  If the environment variable 'NO_NETWORK_TESTING' is set, then the tests
  will be skipped without attempting any socket connections.

  If the sockets cannot connect to the specified hosts and ports, the
  exception is caught, reported and the tests skipped.


pkgId: 7b81911eb24fc520acef09506d39c74e0c89b572ad451d159ca575673d52f3e6
name: perl-Test-SharedFork
arch: noarch
version: 0.35
epoch: 0
release: 1.1
summary: Fork Test
url: http://search.cpan.org/dist/Test-SharedFork/
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Test-SharedFork-0.35-1.1.src.rpm
location_href: perl-Test-SharedFork/perl-Test-SharedFork-0.35-1.1.noarch.rpm
checksum_type: sha256
description:
  Test::SharedFork is utility module for Test::Builder.

  This module makes fork(2) safety in your test case.

  This module merges test count with parent process & child process.


pkgId: 29c453803ce94a694ff88cf6e5d07b8a7535f202d0cfa11a1290e088e79d19cc
name: perl-Test-Simple
arch: noarch
version: 1.302199
epoch: 0
release: 1.1
summary: Basic utilities for writing tests
url: https://metacpan.org/release/Test-Simple
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Test-Simple-1.302199-1.1.src.rpm
location_href: perl-Test-Simple/perl-Test-Simple-1.302199-1.1.noarch.rpm
checksum_type: sha256
description:
  ** If you are unfamiliar with testing *read Test::Tutorial first!* **

  This is an extremely simple, extremely basic module for writing tests
  suitable for CPAN modules and other pursuits. If you wish to do more
  complicated testing, use the Test::More module (a drop-in replacement for
  this one).


pkgId: adeab9e3d314740da8374d39037cb4de2949f99d95a4048548d4afefa825458e
name: perl-Test-Strict
arch: noarch
version: 0.52
epoch: 0
release: 1.1
summary: Check syntax, presence of use strict; and test coverage
url: https://metacpan.org/release/Test-Strict
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Test-Strict-0.52-1.1.src.rpm
location_href: perl-Test-Strict/perl-Test-Strict-0.52-1.1.noarch.rpm
checksum_type: sha256
description:
  The most basic test one can write is "does it compile ?". This module tests
  if the code compiles and play nice with Test::Simple modules.

  Another good practice this module can test is to "use strict;" in all perl
  files.

  By setting a minimum test coverage through 'all_cover_ok()', a code author
  can ensure his code is tested above a preset level of _kwality_ throughout
  the development cycle.

  Along with Test::Pod, this module can provide the first tests to setup for
  a module author.

  This module should be able to run under the -T flag for perl >= 5.6. All
  paths are untainted with the following pattern: 'qr|^([-+@\w./:\\]+)$|'
  controlled by '$Test::Strict::UNTAINT_PATTERN'.


pkgId: d68c3a6ba185c77006d59eb51c980a84a9851e86d2049b5d53fa46b7498fee42
name: perl-Test-SubCalls
arch: noarch
version: 1.10
epoch: 0
release: 1.1
summary: Track the number of times subs are called
url: http://search.cpan.org/dist/Test-SubCalls/
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Test-SubCalls-1.10-1.1.src.rpm
location_href: perl-Test-SubCalls/perl-Test-SubCalls-1.10-1.1.noarch.rpm
checksum_type: sha256
description:
  There are a number of different situations (like testing caching code)
  where you want to want to do a number of tests, and then verify that some
  underlying subroutine deep within the code was called a specific number of
  times.

  This module provides a number of functions for doing testing in this way in
  association with your normal Test::More (or similar) test scripts.


pkgId: 1a4d7afa144e093e0e39907cc165dae51e379b03b1557d2dffeb259fe5703c70
name: perl-Test-Taint
arch: src
version: 1.08
epoch: 0
release: 1.1
summary: Tools to test taintedness
url: https://metacpan.org/release/Test-Taint
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
location_href: perl-Test-Taint/perl-Test-Taint-1.08-1.1.src.rpm
checksum_type: sha256
description:
  Tainted data is data that comes from an unsafe source, such as the command
  line, or, in the case of web apps, any GET or POST transactions. Read the
  perlsec man page for details on why tainted data is bad, and how to untaint
  the data.

  When you're writing unit tests for code that deals with tainted data,
  you'll want to have a way to provide tainted data for your routines to
  handle, and easy ways to check and report on the taintedness of your data,
  in standard Test::More style.


pkgId: 0827759007246b87731fc2171060a38267205edd13f44e95a2c6bc719d049965
name: perl-Test-Taint-debuginfo
arch: x86_64
version: 1.08
epoch: 0
release: 1.1
summary: Debug information for package perl-Test-Taint
url: https://metacpan.org/release/Test-Taint
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Test-Taint-1.08-1.1.src.rpm
location_href: perl-Test-Taint/perl-Test-Taint-debuginfo-1.08-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-Test-Taint.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: a5936f94eb06241ead9ba46488003ed54ddb1864609f98098792389ae9a0d700
name: perl-Test-Taint-debugsource
arch: x86_64
version: 1.08
epoch: 0
release: 1.1
summary: Debug sources for package perl-Test-Taint
url: https://metacpan.org/release/Test-Taint
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Test-Taint-1.08-1.1.src.rpm
location_href: perl-Test-Taint/perl-Test-Taint-debugsource-1.08-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package perl-Test-Taint.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: 8fe0928836aab89bef8256d33cf8a7c4b686dc072ffe373244389c70524149d4
name: perl-Test-Warn
arch: noarch
version: 0.37
epoch: 0
release: 1.1
summary: Perl extension to test methods for warnings
url: https://metacpan.org/release/Test-Warn
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Test-Warn-0.37-1.1.src.rpm
location_href: perl-Test-Warn/perl-Test-Warn-0.37-1.1.noarch.rpm
checksum_type: sha256
description:
  A good style of Perl programming calls for a lot of diverse regression
  tests.

  This module provides a few convenience methods for testing warning
  based-code.

  If you are not already familiar with the Test::More manpage now would be
  the time to go take a look.


pkgId: bd3c52834e1aefa44feb0a9c6d8c5a8c4a9b7f166603c40d43aeeea621a073fc
name: perl-Test-Warnings
arch: noarch
version: 0.33.0
epoch: 0
release: 1.1
summary: Test for warnings and the lack of them
url: https://metacpan.org/release/Test-Warnings
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Test-Warnings-0.33.0-1.1.src.rpm
location_href: perl-Test-Warnings/perl-Test-Warnings-0.33.0-1.1.noarch.rpm
checksum_type: sha256
description:
  If you've ever tried to use Test::NoWarnings to confirm there are no
  warnings generated by your tests, combined with the convenience of
  'done_testing' to not have to declare a test count, you'll have discovered
  that these two features do not play well together, as the test count will
  be calculated _before_ the warnings test is run, resulting in a TAP error.
  (See 'examples/test_nowarnings.pl' in this distribution for a
  demonstration.)

  This module is intended to be used as a drop-in replacement for
  Test::NoWarnings: it also adds an extra test, but runs this test _before_
  'done_testing' calculates the test count, rather than after. It does this
  by hooking into 'done_testing' as well as via an 'END' block. You can
  declare a plan, or not, and things will still Just Work.

  It is actually equivalent to:

      use Test::NoWarnings 1.04 ':early';

  as warnings are still printed normally as they occur. You are safe, and
  enthusiastically encouraged, to perform a global search-replace of the
  above with 'use Test::Warnings;' whether or not your tests have a plan.

  It can also be used as a replacement for Test::Warn, if you wish to test
  the content of expected warnings; read on to find out how.


pkgId: e9b5cfc931f9fc9987aa0cb988db4e07aaf44a69baf1d3e63031a70b84346a51
name: perl-Test-Without-Module
arch: noarch
version: 0.230.0
epoch: 0
release: 1.1
summary: Test fallback behaviour in absence of modules
url: https://metacpan.org/release/Test-Without-Module
rpm_license: Artistic-2.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Test-Without-Module-0.230.0-1.1.src.rpm
location_href: perl-Test-Without-Module/perl-Test-Without-Module-0.230.0-1.1.noarch.rpm
checksum_type: sha256
description:
  This module allows you to deliberately hide modules from a program even
  though they are installed. This is mostly useful for testing modules that
  have a fallback when a certain dependency module is not installed.


pkgId: 58460541de9c53a88cc7d4314f1b17d51629129d28e130d8f276225b99be784d
name: perl-Test2-Plugin-NoWarnings
arch: noarch
version: 0.100.0
epoch: 0
release: 1.1
summary: Fail if tests warn
url: https://metacpan.org/release/Test2-Plugin-NoWarnings
rpm_license: Artistic-2.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Test2-Plugin-NoWarnings-0.100.0-1.1.src.rpm
location_href: perl-Test2-Plugin-NoWarnings/perl-Test2-Plugin-NoWarnings-0.100.0-1.1.noarch.rpm
checksum_type: sha256
description:
  Loading this plugin causes your tests to fail if there any warnings while
  they run. Each warning generates a new failing test and the warning content
  is outputted via 'diag'.

  This module uses '$SIG{__WARN__}', so if the code you're testing sets this,
  then this module will stop working.


pkgId: 355023f8a44f52b1fdb17d6e32a18a9d7bed4a4c94241ce807cd29c0f2d84ae0
name: perl-Text-BibTeX
arch: src
version: 0.890.0
epoch: 0
release: 1.1
summary: Interface to read and parse BibTeX files
url: https://metacpan.org/release/Text-BibTeX
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
location_href: perl-Text-BibTeX/perl-Text-BibTeX-0.890.0-1.1.src.rpm
checksum_type: sha256
description:
  The 'Text::BibTeX' module serves mainly as a high-level introduction to the
  'Text::BibTeX' library, for both code and documentation purposes. The code
  loads the two fundamental modules for processing BibTeX files
  ('Text::BibTeX::File' and 'Text::BibTeX::Entry'), and this documentation
  gives a broad overview of the whole library that isn't available in the
  documentation for the individual modules that comprise it.

  In addition, the 'Text::BibTeX' module provides a number of miscellaneous
  functions that are useful in processing BibTeX data (especially the kind
  that comes from bibliographies as defined by BibTeX 0.99, rather than
  generic database files). These functions don't generally fit in the
  object-oriented class hierarchy centred around the 'Text::BibTeX::Entry'
  class, mainly because they are specific to bibliographic data and operate
  on generic strings (rather than being tied to a particular BibTeX entry).
  These are also documented here, in "MISCELLANEOUS FUNCTIONS".

  Note that every module described here begins with the 'Text::BibTeX'
  prefix. For brevity, I have dropped this prefix from most class and module
  names in the rest of this manual page (and in most of the other manual
  pages in the library).


pkgId: d59e3abf3e384160a43b3d62cbc5244d64094583146082aaab5e09ae32c1c2f8
name: perl-Text-BibTeX-debuginfo
arch: x86_64
version: 0.890.0
epoch: 0
release: 1.1
summary: Debug information for package perl-Text-BibTeX
url: https://metacpan.org/release/Text-BibTeX
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Text-BibTeX-0.890.0-1.1.src.rpm
location_href: perl-Text-BibTeX/perl-Text-BibTeX-debuginfo-0.890.0-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-Text-BibTeX.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: f80d33e2ac9a4381751899d1d6e475573f411fea7f95428238baa79a7115c1c5
name: perl-Text-BibTeX-debugsource
arch: x86_64
version: 0.890.0
epoch: 0
release: 1.1
summary: Debug sources for package perl-Text-BibTeX
url: https://metacpan.org/release/Text-BibTeX
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Text-BibTeX-0.890.0-1.1.src.rpm
location_href: perl-Text-BibTeX/perl-Text-BibTeX-debugsource-0.890.0-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package perl-Text-BibTeX.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: 43f3aa0df921f8ee4f521b9067d222edc35afca1a7d6afa5b8c7a3a729f42ebc
name: perl-Text-BibTeX-devel
arch: x86_64
version: 0.890.0
epoch: 0
release: 1.1
summary: C library for parsing and processing BibTeX files
url: https://metacpan.org/release/Text-BibTeX
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Other
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Text-BibTeX-0.890.0-1.1.src.rpm
location_href: perl-Text-BibTeX/perl-Text-BibTeX-devel-0.890.0-1.1.x86_64.rpm
checksum_type: sha256
description:
  The libbtparse is a C library for parsing and processing BibTeX files.
  Note that the interface provided by libbtparse, while complete, is fairly
  low-level.  If you have more sophisticated needs, you might be interested
  the "Text::BibTeX" module for Perl.


pkgId: 8355e3f2c88272ad020ba3751f7550bf9410e3b3cdb5414c8b937f7f97e64ab3
name: perl-Text-BibTeX-devel-debuginfo
arch: x86_64
version: 0.890.0
epoch: 0
release: 1.1
summary: Debug information for package perl-Text-BibTeX-devel
url: https://metacpan.org/release/Text-BibTeX
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Text-BibTeX-0.890.0-1.1.src.rpm
location_href: perl-Text-BibTeX/perl-Text-BibTeX-devel-debuginfo-0.890.0-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-Text-BibTeX-devel.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 1621efe76a4449142ddf7bb45815142d3e5a890d5f76093958dc84b41974ace0
name: perl-Text-CSV
arch: noarch
version: 2.40.0
epoch: 0
release: 1.1
summary: Comma-separated values manipulator (using XS or PurePerl)
url: https://metacpan.org/release/Text-CSV
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Text-CSV-2.40.0-1.1.src.rpm
location_href: perl-Text-CSV/perl-Text-CSV-2.40.0-1.1.noarch.rpm
checksum_type: sha256
description:
  Text::CSV is a thin wrapper for Text::CSV_XS-compatible modules now. All
  the backend modules provide facilities for the composition and
  decomposition of comma-separated values. Text::CSV uses Text::CSV_XS by
  default, and when Text::CSV_XS is not available, falls back on
  Text::CSV_PP, which is bundled in the same distribution as this module.


pkgId: 87b1df6531c3ebd83e3840b17ddea267633cd361ce9e9636f0c40bf47f9e5c7f
name: perl-Text-CSV_XS
arch: src
version: 1.550.0
epoch: 0
release: 1.1
summary: Comma-Separated Values manipulation routines
url: https://metacpan.org/release/Text-CSV_XS
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
location_href: perl-Text-CSV_XS/perl-Text-CSV_XS-1.550.0-1.1.src.rpm
checksum_type: sha256
description:
  Text::CSV_XS provides facilities for the composition and decomposition of
  comma-separated values. An instance of the Text::CSV_XS class will combine
  fields into a 'CSV' string and parse a 'CSV' string into fields.

  The module accepts either strings or files as input and support the use of
  user-specified characters for delimiters, separators, and escapes.


pkgId: 79a5eebc7abde366dd1a06d3b08876a73b831928832be443041cb51862017971
name: perl-Text-CSV_XS-debuginfo
arch: x86_64
version: 1.550.0
epoch: 0
release: 1.1
summary: Debug information for package perl-Text-CSV_XS
url: https://metacpan.org/release/Text-CSV_XS
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Text-CSV_XS-1.550.0-1.1.src.rpm
location_href: perl-Text-CSV_XS/perl-Text-CSV_XS-debuginfo-1.550.0-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-Text-CSV_XS.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: ec530d488c70e6862d2816d66bb4a51a277609e930f4dc7c7a745337a279878c
name: perl-Text-CSV_XS-debugsource
arch: x86_64
version: 1.550.0
epoch: 0
release: 1.1
summary: Debug sources for package perl-Text-CSV_XS
url: https://metacpan.org/release/Text-CSV_XS
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Text-CSV_XS-1.550.0-1.1.src.rpm
location_href: perl-Text-CSV_XS/perl-Text-CSV_XS-debugsource-1.550.0-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package perl-Text-CSV_XS.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: c3832187f6ab4ffb7b562da0919b85b80ad6af4f9eca92d79d1442edc8972d52
name: perl-Text-CharWidth
arch: src
version: 0.04
epoch: 0
release: 1.1
summary: Get number of occupied columns of a string on terminal
url: http://search.cpan.org/~kubota/Text-CharWidth-0.04/CharWidth.pm
rpm_license: Artistic-1.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: System/I18n/Japanese
rpm_buildhost: reproducible
location_href: perl-Text-CharWidth/perl-Text-CharWidth-0.04-1.1.src.rpm
checksum_type: sha256
description:
  Get number of occupied columns of a string on terminal



  Authors:
  --------
      &#20037;&#20445;&#30000; &#26234;&#24195; (Tomohiro KUBOTA) <kubota@debian.org>


pkgId: 37ca0eb2bb4c7b20719b12494a38c5a6c850fd823f3a717a9eea8b322d4d892c
name: perl-Text-CharWidth-debuginfo
arch: x86_64
version: 0.04
epoch: 0
release: 1.1
summary: Debug information for package perl-Text-CharWidth
url: http://search.cpan.org/~kubota/Text-CharWidth-0.04/CharWidth.pm
rpm_license: Artistic-1.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Text-CharWidth-0.04-1.1.src.rpm
location_href: perl-Text-CharWidth/perl-Text-CharWidth-debuginfo-0.04-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-Text-CharWidth.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 4180adc143d443eadcf38385eada330be59089108183e9df693853bc1b429471
name: perl-Text-CharWidth-debugsource
arch: x86_64
version: 0.04
epoch: 0
release: 1.1
summary: Debug sources for package perl-Text-CharWidth
url: http://search.cpan.org/~kubota/Text-CharWidth-0.04/CharWidth.pm
rpm_license: Artistic-1.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Text-CharWidth-0.04-1.1.src.rpm
location_href: perl-Text-CharWidth/perl-Text-CharWidth-debugsource-0.04-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package perl-Text-CharWidth.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: 95868d538989d7f19a6b09a8cdf93042506a369112662eb3db0b78d8dc4a9ceb
name: perl-Text-Diff
arch: noarch
version: 1.45
epoch: 0
release: 1.1
summary: Perform diffs on files and record sets
url: http://search.cpan.org/dist/Text-Diff/
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Text-Diff-1.45-1.1.src.rpm
location_href: perl-Text-Diff/perl-Text-Diff-1.45-1.1.noarch.rpm
checksum_type: sha256
description:
  'diff()' provides a basic set of services akin to the GNU 'diff' utility.
  It is not anywhere near as feature complete as GNU 'diff', but it is better
  integrated with Perl and available on all platforms. It is often faster
  than shelling out to a system's 'diff' executable for small files, and
  generally slower on larger files.

  Relies on Algorithm::Diff for, well, the algorithm. This may not produce
  the same exact diff as a system's local 'diff' executable, but it will be a
  valid diff and comprehensible by 'patch'. We haven't seen any differences
  between Algorithm::Diff's logic and GNU 'diff''s, but we have not examined
  them to make sure they are indeed identical.

  *Note*: If you don't want to import the 'diff' function, do one of the
  following:

     use Text::Diff ();

     require Text::Diff;

  That's a pretty rare occurrence, so 'diff()' is exported by default.

  If you pass a filename, but the file can't be read, then 'diff()' will
  'croak'.


pkgId: 46a7c975442c5c014bbe9d07b6e9970eab4a7dad15823d9c904da38af6194aac
name: perl-Text-Glob
arch: noarch
version: 0.11
epoch: 0
release: 1.1
summary: Match Globbing Patterns Against Text
url: http://search.cpan.org/dist/Text-Glob/
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Text-Glob-0.11-1.1.src.rpm
location_href: perl-Text-Glob/perl-Text-Glob-0.11-1.1.noarch.rpm
checksum_type: sha256
description:
  Text::Glob implements glob(3) style matching that can be used to match
  against text, rather than fetching names from a filesystem. If you want to
  do full file globbing use the File::Glob module instead.


pkgId: 28985be67405f142634fe6de7b104d21b83c0f7aeac3a6e73be8be03bad51739
name: perl-Text-Iconv
arch: src
version: 1.7
epoch: 0
release: 1.1
summary: Perl interface to iconv() codeset conversion function
url: http://search.cpan.org/dist/Text-Iconv
rpm_license: Artistic-1.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
location_href: perl-Text-Iconv/perl-Text-Iconv-1.7-1.1.src.rpm
checksum_type: sha256
description:
  The Text::Iconv module provides a Perl interface to the iconv() function as
  defined by the Single UNIX Specification.

  The convert() method converts the encoding of characters in the input string
  from the fromcode codeset to the tocode codeset, and returns the result.

  Settings of fromcode and tocode and their permitted combinations are
  implementation-dependent. Valid values are specified in the system
  documentation; the iconv(1) utility should also provide a -l option that lists
  all supported codesets.


pkgId: 98d202332d357acb33fce08078ef7b0d9d2d6283f39576d7077649f652877740
name: perl-Text-Iconv-debuginfo
arch: x86_64
version: 1.7
epoch: 0
release: 1.1
summary: Debug information for package perl-Text-Iconv
url: http://search.cpan.org/dist/Text-Iconv
rpm_license: Artistic-1.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Text-Iconv-1.7-1.1.src.rpm
location_href: perl-Text-Iconv/perl-Text-Iconv-debuginfo-1.7-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-Text-Iconv.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 764919aee2ef4c6e01b2a9b7753ba01ed7089d65aed18ec887a1880b8d38b17b
name: perl-Text-Iconv-debugsource
arch: x86_64
version: 1.7
epoch: 0
release: 1.1
summary: Debug sources for package perl-Text-Iconv
url: http://search.cpan.org/dist/Text-Iconv
rpm_license: Artistic-1.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Text-Iconv-1.7-1.1.src.rpm
location_href: perl-Text-Iconv/perl-Text-Iconv-debugsource-1.7-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package perl-Text-Iconv.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: 83225f0951faa68a5de759c5c65ab9b244f3659e6954305f8efae18e36c01ce3
name: perl-Text-Roman
arch: noarch
version: 3.5
epoch: 0
release: 1.1
summary: Allows conversion between Roman and Arabic algarisms.
url: http://search.cpan.org/dist/Text-Roman/
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Text-Roman-3.5-1.1.src.rpm
location_href: perl-Text-Roman/perl-Text-Roman-3.5-1.1.noarch.rpm
checksum_type: sha256
description:
  This package supports both conventional Roman algarisms (which range from
  _1_ to _3999_) and Milhar Romans, a variation which uses a bar across the
  algarism to indicate multiplication by _1_000_. For the purposes of this
  module, acceptable syntax consists of an underscore suffixed to the
  algarism e.g. IV_V = _4_005_. The term Milhar apparently derives from the
  Portuguese word for "thousands" and the range of this notation extends the
  range of Roman numbers to _3999 * 1000 + 3999 = 4_002_999_.

  Note: the functions in this package treat Roman algarisms in a
  case-insensitive manner such that "VI" == "vI" == "Vi" == "vi".

  The following functions may be imported into the caller package by name:


pkgId: 4d6e8317deda2bb41aea7036f987448eab106ed1622a9468f3ab8fc890d580cb
name: perl-Text-Soundex
arch: src
version: 3.05
epoch: 0
release: 1.1
summary: Implementation of the soundex algorithm
url: http://search.cpan.org/dist/Text-Soundex/
rpm_license: HPND
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
location_href: perl-Text-Soundex/perl-Text-Soundex-3.05-1.1.src.rpm
checksum_type: sha256
description:
  Soundex is a phonetic algorithm for indexing names by sound, as pronounced
  in English. The goal is for names with the same pronunciation to be encoded
  to the same representation so that they can be matched despite minor
  differences in spelling. Soundex is the most widely known of all phonetic
  algorithms and is often used (incorrectly) as a synonym for "phonetic
  algorithm". Improvements to Soundex are the basis for many modern phonetic
  algorithms. (Wikipedia, 2007)

  This module implements the original soundex algorithm developed by Robert
  Russell and Margaret Odell, patented in 1918 and 1922, as well as a
  variation called "American Soundex" used for US census data, and current
  maintained by the National Archives and Records Administration (NARA).

  The soundex algorithm may be recognized from Donald Knuth's *The Art of
  Computer Programming*. The algorithm described by Knuth is the NARA
  algorithm.

  The value returned for strings which have no soundex encoding is defined
  using '$Text::Soundex::nocode'. The default value is 'undef', however
  values such as ''Z000'' are commonly used alternatives.

  For backward compatibility with older versions of this module the
  '$Text::Soundex::nocode' is exported into the caller's namespace as
  '$soundex_nocode'.

  In scalar context, 'soundex()' returns the soundex code of its first
  argument. In list context, a list is returned in which each element is the
  soundex code for the corresponding argument passed to 'soundex()'. For
  example, the following code assigns @codes the value '('M200', 'S320')':

     @codes = soundex qw(Mike Stok);

  To use 'Text::Soundex' to generate codes that can be used to search one of
  the publically available US Censuses, a variant of the soundex algorithm
  must be used:

      use Text::Soundex;
      $code = soundex_nara($name);

  An example of where these algorithm differ follows:

      use Text::Soundex;
      print soundex("Ashcraft"), "\n";       # prints: A226
      print soundex_nara("Ashcraft"), "\n";  # prints: A261


pkgId: d1eeb166cd27496c4f55c073e73642b9a08db37def53559af6cb381c47f39b92
name: perl-Text-Soundex-debuginfo
arch: x86_64
version: 3.05
epoch: 0
release: 1.1
summary: Debug information for package perl-Text-Soundex
url: http://search.cpan.org/dist/Text-Soundex/
rpm_license: HPND
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Text-Soundex-3.05-1.1.src.rpm
location_href: perl-Text-Soundex/perl-Text-Soundex-debuginfo-3.05-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-Text-Soundex.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 21b792ce6254f2678b26ed01e9ab2daf35615d6f1f3f3f1a7ba58e6e297da103
name: perl-Text-Soundex-debugsource
arch: x86_64
version: 3.05
epoch: 0
release: 1.1
summary: Debug sources for package perl-Text-Soundex
url: http://search.cpan.org/dist/Text-Soundex/
rpm_license: HPND
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Text-Soundex-3.05-1.1.src.rpm
location_href: perl-Text-Soundex/perl-Text-Soundex-debugsource-3.05-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package perl-Text-Soundex.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: d444190fff135e7eaca37f28c659558b5ab5d27fce8762ec2afc6bff954248d0
name: perl-Text-WrapI18N
arch: noarch
version: 0.06
epoch: 0
release: 1.1
summary: Line Wrapping Module
url: http://search.cpan.org/dist/Text-WrapI18N
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Text-WrapI18N-0.06-1.1.src.rpm
location_href: perl-Text-WrapI18N/perl-Text-WrapI18N-0.06-1.1.noarch.rpm
checksum_type: sha256
description:
  Line wrapping module with support for multibyte, fullwidth, and combining
  characters and languages without whitespaces between words.


pkgId: f4cd6a7889f055d9b5d9b60effc120074763c27fff2a6532108c4ecff692f150
name: perl-Text-Wrapper
arch: noarch
version: 1.05
epoch: 0
release: 1.1
summary: Word wrap text by breaking long lines
url: http://search.cpan.org/dist/Text-Wrapper/
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Text-Wrapper-1.05-1.1.src.rpm
location_href: perl-Text-Wrapper/perl-Text-Wrapper-1.05-1.1.noarch.rpm
checksum_type: sha256
description:
  Text::Wrapper provides simple word wrapping. It breaks long lines, but does
  not alter spacing or remove existing line breaks. If you're looking for
  more sophisticated text formatting, try the the Text::Format manpage
  module.

  Reasons to use Text::Wrapper instead of Text::Format:

  * *

    Text::Wrapper is significantly smaller.

  * *

    It does not alter existing whitespace or combine short lines. It only
    breaks long lines.

  Again, if Text::Wrapper doesn't meet your needs, try Text::Format.


pkgId: 0aa62ff7006a8cb32579e216b5f7491c1396943e7334347b78beea35593c963c
name: perl-Tie-Cycle
arch: noarch
version: 1.228.0
epoch: 0
release: 1.1
summary: Cycle through a list of values via a scalar
url: https://metacpan.org/release/Tie-Cycle
rpm_license: Artistic-2.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Tie-Cycle-1.228.0-1.1.src.rpm
location_href: perl-Tie-Cycle/perl-Tie-Cycle-1.228.0-1.1.noarch.rpm
checksum_type: sha256
description:
  You use 'Tie::Cycle' to go through a list over and over again. Once you get
  to the end of the list, you go back to the beginning. You don't have to
  worry about any of this since the magic of tie does that for you.

  The tie takes an array reference as its third argument. The tie should
  succeed unless the argument is not an array reference. Previous versions
  required you to use an array that had more than one element (what's the
  pointing of looping otherwise?), but I've removed that restriction since
  the number of elements you want to use may change depending on the
  situation.

  During the tie, this module makes a shallow copy of the array reference. If
  the array reference contains references, and those references are changed
  after the tie, the elements of the cycle will change as well. See the
  included _test.pl_ script for an example of this effect.


pkgId: fc2ac034383896027db345190de54d6d6f058e032b964bf9f84442220909f660
name: perl-Tie-IxHash
arch: noarch
version: 1.23
epoch: 0
release: 1.1
summary: ordered associative arrays for Perl
url: http://search.cpan.org/dist/Tie-IxHash/
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Tie-IxHash-1.23-1.1.src.rpm
location_href: perl-Tie-IxHash/perl-Tie-IxHash-1.23-1.1.noarch.rpm
checksum_type: sha256
description:
  This Perl module implements Perl hashes that preserve the order in which
  the hash elements were added. The order is not affected when values
  corresponding to existing keys in the IxHash are changed. The elements can
  also be set to any arbitrary supplied order. The familiar perl array
  operations can also be performed on the IxHash.


pkgId: 577948bdd589fa999b361b0128780480cc9abb502faef6c6cd37d77560e2ea43
name: perl-TimeDate
arch: noarch
version: 2.33
epoch: 0
release: 1.1
summary: TimeDate Perl module
url: https://metacpan.org/release/TimeDate
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-TimeDate-2.33-1.1.src.rpm
location_href: perl-TimeDate/perl-TimeDate-2.33-1.1.noarch.rpm
checksum_type: sha256
description:
  Date::Parse provides two routines for parsing date strings into time values.

  str2time(DATE [, ZONE])

     str2time parses DATE and returns a unix time value, or undef upon failure.
      ZONE, if given, specifies the timezone to assume when parsing if the date
      string does not specify a timezome.

  strptime(DATE [, ZONE])

     strptime takes the same arguments as str2time but returns an array of values
      ($ss,$mm,$hh,$day,$month,$year,$zone). Elements are only defined if they
      could be extracted from the date string. The $zone element is the timezone
      offset in seconds from GMT. An empty array is returned upon failure.


pkgId: 60205ffde130558b23d70aa6587db9e9c95beae79e9d151721d5088481c19a6d
name: perl-Tk
arch: src
version: 804.036
epoch: 0
release: 1.1
summary: Tk - a Graphical User Interface Toolkit
url: https://metacpan.org/release/Tk
rpm_license: (Artistic-1.0 OR GPL-1.0-or-later) AND Zlib
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
location_href: perl-Tk/perl-Tk-804.036-1.1.src.rpm
checksum_type: sha256
description:
  This a re-port of a perl interface to Tk8.4.
  C code is derived from Tcl/Tk8.4.5.
  It also includes all the C code parts of Tix8.1.4 from SourceForge.
  The perl code corresponding to Tix's Tcl code is not fully implemented.

  Perl API is essentially the same as Tk800 series Tk800.025 but has not
  been verified as compliant. There ARE differences see pod/804delta.pod.


pkgId: 4dd29c2fab990026d45b2b5c70c31b442353be50d2491e1ca509e9429f2dcbef
name: perl-Tk-debuginfo
arch: x86_64
version: 804.036
epoch: 0
release: 1.1
summary: Debug information for package perl-Tk
url: https://metacpan.org/release/Tk
rpm_license: (Artistic-1.0 OR GPL-1.0-or-later) AND Zlib
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Tk-804.036-1.1.src.rpm
location_href: perl-Tk/perl-Tk-debuginfo-804.036-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-Tk.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 6fd94f2133d2da2467f05c9ef43d18c97e347304221c21616f04a5dbbb2bd0b0
name: perl-Tk-debugsource
arch: x86_64
version: 804.036
epoch: 0
release: 1.1
summary: Debug sources for package perl-Tk
url: https://metacpan.org/release/Tk
rpm_license: (Artistic-1.0 OR GPL-1.0-or-later) AND Zlib
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Tk-804.036-1.1.src.rpm
location_href: perl-Tk/perl-Tk-debugsource-804.036-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package perl-Tk.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: 2ccf92b900c46cd46a9ff6e3c01bfa2e0388f00e4afc5a7c353889a89cd877d4
name: perl-Try-Tiny
arch: noarch
version: 0.31
epoch: 0
release: 1.1
summary: Minimal try/catch with proper preservation of $@
url: https://metacpan.org/release/Try-Tiny
rpm_license: MIT
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Try-Tiny-0.31-1.1.src.rpm
location_href: perl-Try-Tiny/perl-Try-Tiny-0.31-1.1.noarch.rpm
checksum_type: sha256
description:
  This module provides bare bones 'try'/'catch'/'finally' statements that are
  designed to minimize common mistakes with eval blocks, and NOTHING else.

  This is unlike TryCatch which provides a nice syntax and avoids adding
  another call stack layer, and supports calling 'return' from the 'try'
  block to return from the parent subroutine. These extra features come at a
  cost of a few dependencies, namely Devel::Declare and Scope::Upper which
  are occasionally problematic, and the additional catch filtering uses Moose
  type constraints which may not be desirable either.

  The main focus of this module is to provide simple and reliable error
  handling for those having a hard time installing TryCatch, but who still
  want to write correct 'eval' blocks without 5 lines of boilerplate each
  time.

  It's designed to work as correctly as possible in light of the various
  pathological edge cases (see BACKGROUND) and to be compatible with any
  style of error values (simple strings, references, objects, overloaded
  objects, etc).

  If the 'try' block dies, it returns the value of the last statement
  executed in the 'catch' block, if there is one. Otherwise, it returns
  'undef' in scalar context or the empty list in list context. The following
  examples all assign '"bar"' to '$x':

    my $x = try { die "foo" } catch { "bar" };
    my $x = try { die "foo" } || "bar";
    my $x = (try { die "foo" }) // "bar";

    my $x = eval { die "foo" } || "bar";

  You can add 'finally' blocks, yielding the following:

    my $x;
    try { die 'foo' } finally { $x = 'bar' };
    try { die 'foo' } catch { warn "Got a die: $_" } finally { $x = 'bar' };

  'finally' blocks are always executed making them suitable for cleanup code
  which cannot be handled using local. You can add as many 'finally' blocks
  to a given 'try' block as you like.

  Note that adding a 'finally' block without a preceding 'catch' block
  suppresses any errors. This behaviour is consistent with using a standalone
  'eval', but it is not consistent with 'try'/'finally' patterns found in
  other programming languages, such as Java, Python, Javascript or C#. If you
  learned the 'try'/'finally' pattern from one of these languages, watch out
  for this.


pkgId: 42cfafffd6bc3fb59e402eb3b9612d906b041dccbdf0ed7da98991cf1dbbfce2
name: perl-URI
arch: noarch
version: 5.280.0
epoch: 0
release: 1.1
summary: Uniform Resource Identifiers (absolute and relative)
url: https://metacpan.org/release/URI
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-URI-5.280.0-1.1.src.rpm
location_href: perl-URI/perl-URI-5.280.0-1.1.noarch.rpm
checksum_type: sha256
description:
  This module implements the 'URI' class. Objects of this class represent
  "Uniform Resource Identifier references" as specified in RFC 2396 (and
  updated by RFC 2732).

  A Uniform Resource Identifier is a compact string of characters that
  identifies an abstract or physical resource. A Uniform Resource Identifier
  can be further classified as either a Uniform Resource Locator (URL) or a
  Uniform Resource Name (URN). The distinction between URL and URN does not
  matter to the 'URI' class interface. A "URI-reference" is a URI that may
  have additional information attached in the form of a fragment identifier.

  An absolute URI reference consists of three parts: a _scheme_, a
  _scheme-specific part_ and a _fragment_ identifier. A subset of URI
  references share a common syntax for hierarchical namespaces. For these,
  the scheme-specific part is further broken down into _authority_, _path_
  and _query_ components. These URIs can also take the form of relative URI
  references, where the scheme (and usually also the authority) component is
  missing, but implied by the context of the URI reference. The three forms
  of URI reference syntax are summarized as follows:

    <scheme>:<scheme-specific-part>#<fragment>
    <scheme>://<authority><path>?<query>#<fragment>
    <path>?<query>#<fragment>

  The components into which a URI reference can be divided depend on the
  _scheme_. The 'URI' class provides methods to get and set the individual
  components. The methods available for a specific 'URI' object depend on the
  scheme.


pkgId: 9c3af217051671488e62eb7dba8925eee2a6a35f6266553a1e06eba07d6a8ede
name: perl-Unicode-Collate
arch: src
version: 1.31
epoch: 0
release: 1.1
summary: Unicode Collation Algorithm
url: https://metacpan.org/release/Unicode-Collate
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
location_href: perl-Unicode-Collate/perl-Unicode-Collate-1.31-1.1.src.rpm
checksum_type: sha256
description:
  This module is an implementation of Unicode Technical Standard #10 (a.k.a.
  UTS #10) - Unicode Collation Algorithm (a.k.a. UCA).


pkgId: 76dfaf125b74653a3e8c88201fa8279babde0e246e8fd373b338071b05d39cfc
name: perl-Unicode-Collate-debuginfo
arch: x86_64
version: 1.31
epoch: 0
release: 1.1
summary: Debug information for package perl-Unicode-Collate
url: https://metacpan.org/release/Unicode-Collate
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Unicode-Collate-1.31-1.1.src.rpm
location_href: perl-Unicode-Collate/perl-Unicode-Collate-debuginfo-1.31-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-Unicode-Collate.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 00bd64eeccd2eec1ac64dc35fb6d34e8258e69808812945482a7fd522ba33b11
name: perl-Unicode-Collate-debugsource
arch: x86_64
version: 1.31
epoch: 0
release: 1.1
summary: Debug sources for package perl-Unicode-Collate
url: https://metacpan.org/release/Unicode-Collate
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Unicode-Collate-1.31-1.1.src.rpm
location_href: perl-Unicode-Collate/perl-Unicode-Collate-debugsource-1.31-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package perl-Unicode-Collate.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: 06256645189dee5820c6620b05b66f96a115e43ee1d18bdfda36f09e1bfa4d8e
name: perl-Unicode-EastAsianWidth
arch: noarch
version: 12.0
epoch: 0
release: 1.1
summary: East Asian Width properties
url: https://metacpan.org/release/Unicode-EastAsianWidth
rpm_license: CC0-1.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Unicode-EastAsianWidth-12.0-1.1.src.rpm
location_href: perl-Unicode-EastAsianWidth/perl-Unicode-EastAsianWidth-12.0-1.1.noarch.rpm
checksum_type: sha256
description:
  This module provide user-defined Unicode properties that deal with width
  status of East Asian characters, as specified in
  http://www.unicode.org/unicode/reports/tr11/.

  It exports the following functions to the caller's scope, to be used by
  Perl's Unicode matching system: 'InEastAsianFullwidth',
  'InEastAsianHalfwidth', 'InEastAsianAmbiguous', 'InEastAsianNarrow'
  'InEastAsianWide', 'InEastAsianNeutral'.

  In accord to TR11 cited above, two additional context-sensitive properties
  are exported: 'InFullwidth' (union of 'Fullwidth' and 'Wide') and
  'InHalfwidth' (union of 'Halfwidth', 'Narrow' and 'Neutral').

  _Ambiguous_ characters are treated by default as part of 'InHalfwidth', but
  you can modify this behaviour by assigning a true value to
  '$Unicode::EastAsianWidth::EastAsian' at compile time within a 'BEGIN'
  block before loading this module:

      BEGIN { $Unicode::EastAsianWidth::EastAsian = 1; }
      use Unicode::EastAsianWidth;

  Setting '$Unicode::EastAsianWidth::EastAsian' at run-time used to work on
  Perl versions between 5.8 and 5.14 due to an implementation detail, but it
  will no longer work on Perl 5.16 and later versions, and hence is not
  recommended.


pkgId: 56840768447130fd867748b23655617b61f047f492407bccbebcae4ba5e47087
name: perl-Unicode-LineBreak
arch: src
version: 2019.001
epoch: 0
release: 1.1
summary: UAX #14 Unicode Line Breaking Algorithm
url: https://metacpan.org/release/Unicode-LineBreak
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
location_href: perl-Unicode-LineBreak/perl-Unicode-LineBreak-2019.001-1.1.src.rpm
checksum_type: sha256
description:
  Unicode::LineBreak performs Line Breaking Algorithm described in Unicode
  Standard Annex #14 [UAX #14]. East_Asian_Width informative property defined
  by Annex #11 [UAX #11] will be concerned to determine breaking positions.


pkgId: 2bdbc9e170a73d0f477c5b8c9193a206cfe95f45c52f7286dcb6f3ef2dcd7dd9
name: perl-Unicode-LineBreak-debuginfo
arch: x86_64
version: 2019.001
epoch: 0
release: 1.1
summary: Debug information for package perl-Unicode-LineBreak
url: https://metacpan.org/release/Unicode-LineBreak
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Unicode-LineBreak-2019.001-1.1.src.rpm
location_href: perl-Unicode-LineBreak/perl-Unicode-LineBreak-debuginfo-2019.001-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-Unicode-LineBreak.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 11f70f5b749feac081275133b9ec9ab56680df6c452ecc0d533d0477646a0664
name: perl-Unicode-LineBreak-debugsource
arch: x86_64
version: 2019.001
epoch: 0
release: 1.1
summary: Debug sources for package perl-Unicode-LineBreak
url: https://metacpan.org/release/Unicode-LineBreak
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Unicode-LineBreak-2019.001-1.1.src.rpm
location_href: perl-Unicode-LineBreak/perl-Unicode-LineBreak-debugsource-2019.001-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package perl-Unicode-LineBreak.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: 81b542fe19f3f5dc79cb8ad6ea5d313e02bdb336b4dea6e4cbce12b12292b094
name: perl-Unicode-Map8
arch: src
version: 0.13
epoch: 0
release: 1.1
summary: Mapping table between 8-bit chars and Unicode
url: http://search.cpan.org/dist/Unicode-Map8/
rpm_license: GPL-1.0+ or Artistic-1.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
location_href: perl-Unicode-Map8/perl-Unicode-Map8-0.13-1.1.src.rpm
checksum_type: sha256
description:
  The Unicode::Map8 class implements efficient mapping tables between
  8-bit character sets and 16-bit character sets like Unicode. The tables
  are efficient both in terms of space allocated and translation speed.
  The 16-bit strings are assumed to use network byte order.


pkgId: 9eacf7c292d20bbcd9d0010d7d93151a00f26cc8f0ba2d38474ac982baf0a9e5
name: perl-Unicode-Map8-debuginfo
arch: x86_64
version: 0.13
epoch: 0
release: 1.1
summary: Debug information for package perl-Unicode-Map8
url: http://search.cpan.org/dist/Unicode-Map8/
rpm_license: GPL-1.0+ or Artistic-1.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Unicode-Map8-0.13-1.1.src.rpm
location_href: perl-Unicode-Map8/perl-Unicode-Map8-debuginfo-0.13-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-Unicode-Map8.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 5bb2d79b42701581ac9076dc13ae50e9f7a681cc7724a0d72b90413d04d130f8
name: perl-Unicode-Map8-debugsource
arch: x86_64
version: 0.13
epoch: 0
release: 1.1
summary: Debug sources for package perl-Unicode-Map8
url: http://search.cpan.org/dist/Unicode-Map8/
rpm_license: GPL-1.0+ or Artistic-1.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Unicode-Map8-0.13-1.1.src.rpm
location_href: perl-Unicode-Map8/perl-Unicode-Map8-debugsource-0.13-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package perl-Unicode-Map8.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: 91b2bc6e164590c199d61423de948be92d25a1223c347a05745c58174b5d2f12
name: perl-Unicode-String
arch: src
version: 2.10
epoch: 0
release: 1.1
summary: String of Unicode characters (UTF-16BE)
url: http://search.cpan.org/dist/Unicode-String/
rpm_license: GPL-1.0+ or Artistic-1.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
location_href: perl-Unicode-String/perl-Unicode-String-2.10-1.1.src.rpm
checksum_type: sha256
description:
  A 'Unicode::String' object represents a sequence of Unicode characters.
  Methods are provided to convert between various external formats
  (encodings) and 'Unicode::String' objects, and methods are provided for
  common string manipulations.

  The functions utf32be(), utf32le(), utf16be(), utf16le(), utf8(), utf7(),
  latin1(), uhex(), uchr() can be imported from the 'Unicode::String' module
  and will work as constructors initializing strings of the corresponding
  encoding.

  The 'Unicode::String' objects overload various operators, which means that
  they in most cases can be treated like plain strings.

  Internally a 'Unicode::String' object is represented by a string of 2 byte
  numbers in network byte order (big-endian). This representation is not
  visible by the API provided, but it might be useful to know in order to
  predict the efficiency of the provided methods.


pkgId: 0f59ec4d01e6fafb50d59219be68758a1bb3efd49d4d66ff017f549d63762420
name: perl-Unicode-String-debuginfo
arch: x86_64
version: 2.10
epoch: 0
release: 1.1
summary: Debug information for package perl-Unicode-String
url: http://search.cpan.org/dist/Unicode-String/
rpm_license: GPL-1.0+ or Artistic-1.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Unicode-String-2.10-1.1.src.rpm
location_href: perl-Unicode-String/perl-Unicode-String-debuginfo-2.10-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-Unicode-String.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 92a83f237695eeee2c7191cd980e1be4f001afedf7e782bccc65f89c1b9157d0
name: perl-Unicode-String-debugsource
arch: x86_64
version: 2.10
epoch: 0
release: 1.1
summary: Debug sources for package perl-Unicode-String
url: http://search.cpan.org/dist/Unicode-String/
rpm_license: GPL-1.0+ or Artistic-1.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Unicode-String-2.10-1.1.src.rpm
location_href: perl-Unicode-String/perl-Unicode-String-debugsource-2.10-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package perl-Unicode-String.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: 972fd481aa5c150c574eb192ce45939374287d014d932802729de601858cd08e
name: perl-Variable-Magic
arch: src
version: 0.640.0
epoch: 0
release: 1.1
summary: Associate user-defined magic to variables from Perl
url: https://metacpan.org/release/Variable-Magic
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
location_href: perl-Variable-Magic/perl-Variable-Magic-0.640.0-1.1.src.rpm
checksum_type: sha256
description:
  Magic is Perl's way of enhancing variables. This mechanism lets the user
  add extra data to any variable and hook syntactical operations (such as
  access, assignment or destruction) that can be applied to it. With this
  module, you can add your own magic to any variable without having to write
  a single line of XS.

  You'll realize that these magic variables look a lot like tied variables.
  It is not surprising, as tied variables are implemented as a special kind
  of magic, just like any 'irregular' Perl variable : scalars like '$!', '$('
  or '$^W', the '%ENV' and '%SIG' hashes, the '@ISA' array, 'vec()' and
  'substr()' lvalues, threads::shared variables... They all share the same
  underlying C API, and this module gives you direct access to it.


pkgId: 8a0d0d705b51e42b9c88fe79e06ef4e612aaf4f254759b03fc32ce27feb99f4f
name: perl-Variable-Magic-debuginfo
arch: x86_64
version: 0.640.0
epoch: 0
release: 1.1
summary: Debug information for package perl-Variable-Magic
url: https://metacpan.org/release/Variable-Magic
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Variable-Magic-0.640.0-1.1.src.rpm
location_href: perl-Variable-Magic/perl-Variable-Magic-debuginfo-0.640.0-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-Variable-Magic.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 5efa4c6bcdbe96bd1f8f0c639e17c5e25c68e24def0793baed440ba2c346b68f
name: perl-Variable-Magic-debugsource
arch: x86_64
version: 0.640.0
epoch: 0
release: 1.1
summary: Debug sources for package perl-Variable-Magic
url: https://metacpan.org/release/Variable-Magic
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-Variable-Magic-0.640.0-1.1.src.rpm
location_href: perl-Variable-Magic/perl-Variable-Magic-debugsource-0.640.0-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package perl-Variable-Magic.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: a9e9eed92723e18838c6c91d1d6fef819f560775038a7bf0476fe5ab314a337e
name: perl-WWW-Mechanize
arch: noarch
version: 2.180.0
epoch: 0
release: 1.1
summary: Handy web browsing in a Perl object
url: https://metacpan.org/release/WWW-Mechanize
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-WWW-Mechanize-2.180.0-1.1.src.rpm
location_href: perl-WWW-Mechanize/perl-WWW-Mechanize-2.180.0-1.1.noarch.rpm
checksum_type: sha256
description:
  'WWW::Mechanize', or Mech for short, is a Perl module for stateful
  programmatic web browsing, used for automating interaction with websites.

  Features include:

  * All HTTP methods
  * High-level hyperlink and HTML form support, without having to parse
    HTML yourself
  * SSL support
  * Automatic cookies
  * Custom HTTP headers
  * Automatic handling of redirections
  * Proxies
  * HTTP authentication

  Mech is well suited for use in testing web applications. If you use one of
  the Test::*, like Test::HTML::Lint modules, you can check the fetched
  content and use that as input to a test call.


pkgId: 43e736f98555f84a70cdc61669b718f7184fdddf7ff3f21de88da00b265183f1
name: perl-WWW-RobotRules
arch: noarch
version: 6.02
epoch: 0
release: 1.1
summary: database of robots.txt-derived permissions
url: http://search.cpan.org/dist/WWW-RobotRules/
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-WWW-RobotRules-6.02-1.1.src.rpm
location_href: perl-WWW-RobotRules/perl-WWW-RobotRules-6.02-1.1.noarch.rpm
checksum_type: sha256
description:
  This module parses _/robots.txt_ files as specified in "A Standard for
  Robot Exclusion", at <http://www.robotstxt.org/wc/norobots.html> Webmasters
  can use the _/robots.txt_ file to forbid conforming robots from accessing
  parts of their web site.

  The parsed files are kept in a WWW::RobotRules object, and this object
  provides methods to check if access to a given URL is prohibited. The same
  WWW::RobotRules object can be used for one or more parsed _/robots.txt_
  files on any number of hosts.

  The following methods are provided:

  * $rules = WWW::RobotRules->new($robot_name)

    This is the constructor for WWW::RobotRules objects. The first argument
    given to new() is the name of the robot.

  * $rules->parse($robot_txt_url, $content, $fresh_until)

    The parse() method takes as arguments the URL that was used to retrieve
    the _/robots.txt_ file, and the contents of the file.

  * $rules->allowed($uri)

    Returns TRUE if this robot is allowed to retrieve this URL.

  * $rules->agent([$name])

    Get/set the agent name. NOTE: Changing the agent name will clear the
    robots.txt rules and expire times out of the cache.


pkgId: 701d24c3e85721ea8fda59068611e25aa243e2a98c5fb1773ebacd95c07f3df5
name: perl-X11-Protocol
arch: noarch
version: 0.56
epoch: 0
release: 1.1
summary: Perl module for the X Window System Protocol, version 11
url: http://search.cpan.org/dist/X11-Protocol/
rpm_license: GPL-1.0-or-later OR Artistic-1.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-X11-Protocol-0.56-1.1.src.rpm
location_href: perl-X11-Protocol/perl-X11-Protocol-0.56-1.1.noarch.rpm
checksum_type: sha256
description:
  X11::Protocol is a client-side interface to the X11 Protocol (see X(1) for
  information about X11), allowing perl programs to display windows and
  graphics on X11 servers.

  A full description of the protocol is beyond the scope of this
  documentation; for complete information, see the _X Window System Protocol,
  X Version 11_, available as Postscript or *roff source from
  'ftp://ftp.x.org', or _Volume 0: X Protocol Reference Manual_ of O'Reilly &
  Associates's series of books about X (ISBN 1-56592-083-X,
  'http://www.oreilly.com'), which contains most of the same information.


pkgId: 612973c058f6acd7345148b5af1a9f41e327b2ba917a7aed8bc5b1afb2c1537a
name: perl-X500-DN
arch: src
version: 0.29
epoch: 0
release: 1.1
summary: Provides an interface for RFC 2253 style DN strings
url: http://search.cpan.org/dist/X500-DN/
rpm_license: Artistic-1.0 OR GPL-2.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
location_href: perl-X500-DN/perl-X500-DN-0.29-1.1.src.rpm
checksum_type: sha256
description:
  X500::DN Provides a pure perl parser and formatter for RFC 2253 style
  DN strings.



  Authors:
  --------
      Robert Joop <yaph-020416@timesink.de>


pkgId: e47cc75ab903bce85379b957c4a4a3f805614112c6499fca79a87fcdfd699003
name: perl-XML-Bare
arch: src
version: 0.53
epoch: 0
release: 1.1
summary: Minimal XML parser implemented via a C state engine
url: http://search.cpan.org/dist/XML-Bare/
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
location_href: perl-XML-Bare/perl-XML-Bare-0.53-1.1.src.rpm
checksum_type: sha256
description:
  This module is a 'Bare' XML parser. It is implemented in C. The parser
  itself is a simple state engine that is less than 500 lines of C. The
  parser builds a C struct tree from input text. That C struct tree is
  converted to a Perl hash by a Perl function that makes basic calls back to
  the C to go through the nodes sequentially.

  The parser itself will only cease parsing if it encounters tags that are
  not closed properly. All other inputs will parse, even invalid inputs. To
  allowing checking for validity, a schema checker is included in the module
  as well.

  The schema format is custom and is meant to be as simple as possible. It is
  based loosely around the way multiplicity is handled in Perl regular
  expressions.


pkgId: 297da141aeb0a3bc6335a07e760b30e9d2df4a53da5f1212a6eadf62702374a8
name: perl-XML-Bare-debuginfo
arch: x86_64
version: 0.53
epoch: 0
release: 1.1
summary: Debug information for package perl-XML-Bare
url: http://search.cpan.org/dist/XML-Bare/
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-XML-Bare-0.53-1.1.src.rpm
location_href: perl-XML-Bare/perl-XML-Bare-debuginfo-0.53-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-XML-Bare.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 4e21981003ce24f49818ab6799af0317cf86f9434190ce2e7ddfc76d889c9c1c
name: perl-XML-Bare-debugsource
arch: x86_64
version: 0.53
epoch: 0
release: 1.1
summary: Debug sources for package perl-XML-Bare
url: http://search.cpan.org/dist/XML-Bare/
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-XML-Bare-0.53-1.1.src.rpm
location_href: perl-XML-Bare/perl-XML-Bare-debugsource-0.53-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package perl-XML-Bare.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: b51ceba4f912f84703f8240f15a596ac2041f58a4db43de98500cd7922b1a9e3
name: perl-XML-DOM
arch: noarch
version: 1.46
epoch: 0
release: 1.1
summary: Perl Module for Building Dom Level 1 Compliant Document Structures
url: https://metacpan.org/pod/XML::DOM
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-XML-DOM-1.46-1.1.src.rpm
location_href: perl-XML-DOM/perl-XML-DOM-1.46-1.1.noarch.rpm
checksum_type: sha256
description:
  This module extends the XML::Parser module by Clark Cooper. The XML::Parser
  module is built on top of XML::Parser::Expat, which is a lower level
  interface to James Clark's expat library.

  XML::DOM::Parser is derived from XML::Parser. It parses XML strings or
  files and builds a data structure that conforms to the API of the Document
  Object Model as described at http://www.w3.org/TR/REC-DOM-Level-1. See the
  XML::Parser manpage for other available features of the XML::DOM::Parser
  class. Note that the 'Style' property should not be used (it is set
  internally.)

  The XML::Parser _NoExpand_ option is more or less supported, in that it
  will generate EntityReference objects whenever an entity reference is
  encountered in character data. I'm not sure how useful this is. Any
  comments are welcome.

  As described in the synopsis, when you create an XML::DOM::Parser object,
  the parse and parsefile methods create an _XML::DOM::Document_ object from
  the specified input. This Document object can then be examined, modified
  and written back out to a file or converted to a string.

  When using XML::DOM with XML::Parser version 2.19 and up, setting the
  XML::DOM::Parser option _KeepCDATA_ to 1 will store CDATASections in
  CDATASection nodes, instead of converting them to Text nodes. Subsequent
  CDATASection nodes will be merged into one. Let me know if this is a
  problem.

  When using XML::Parser 2.27 and above, you can suppress expansion of
  parameter entity references (e.g. %pent;) in the DTD, by setting
  _ParseParamEnt_ to 1 and _ExpandParamEnt_ to 0. See Hidden Nodes for
  details.

  A Document has a tree structure consisting of _Node_ objects. A Node may
  contain other nodes, depending on its type. A Document may have Element,
  Text, Comment, and CDATASection nodes. Element nodes may have Attr,
  Element, Text, Comment, and CDATASection nodes. The other nodes may not
  have any child nodes.

  This module adds several node types that are not part of the DOM spec
  (yet.) These are: ElementDecl (for <!ELEMENT ...> declarations),
  AttlistDecl (for <!ATTLIST ...> declarations), XMLDecl (for <?xml ...?>
  declarations) and AttDef (for attribute definitions in an AttlistDecl.)


pkgId: fbaa5396117224bf0ed4b44e6cb2ac0a4c61c8f9143c596feff485a53805a2db
name: perl-XML-Filter-BufferText
arch: noarch
version: 1.01
epoch: 0
release: 1.1
summary: Filter to put all characters() in one event
url: http://search.cpan.org/dist/XML-Filter-BufferText/
rpm_license: GPL-1.0+ or Artistic-1.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-XML-Filter-BufferText-1.01-1.1.src.rpm
location_href: perl-XML-Filter-BufferText/perl-XML-Filter-BufferText-1.01-1.1.noarch.rpm
checksum_type: sha256
description:
  This is a very simple filter. One common cause of grief (and programmer
  error) is that XML parsers aren't required to provide character events in
  one chunk. They can, but are not forced to, and most don't. This filter
  does the trivial but oft-repeated task of putting all characters into a
  single event.

  Note that this won't help you cases such as:

    <foo> blah <!-- comment --> phubar </foo>

  In the above case, given the interleaving comment, there will be two
  'character()' events. This may be worked around in the future if there is
  demand for it.

  An interesting way to use this filter, instead of telling users to use it,
  is to return it from your handler's constructor, already configured and
  all. That'll make the buffering totally transparent to them
  ('XML::SAX::Writer' does that).


pkgId: 36a5185b126c2d98090c8fb17a8dc3d0d12f2dcfbd9358a9a4cdfdd6a8b06ca9
name: perl-XML-Handler-YAWriter
arch: noarch
version: 0.23
epoch: 0
release: 1.1
summary: Yet another Perl SAX XML Writer
url: http://search.cpan.org/dist/XML-Handler-YAWriter/
rpm_license: GPL-1.0+
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-XML-Handler-YAWriter-0.23-1.1.src.rpm
location_href: perl-XML-Handler-YAWriter/perl-XML-Handler-YAWriter-0.23-1.1.noarch.rpm
checksum_type: sha256
description:
  YAWriter implements Yet Another XML::Handler::Writer. The reasons for this
  one are that I needed a flexible escaping technique, and want some kind of
  pretty printing. If an instance of YAWriter is created without any options,
  the default behavior is to produce an array of strings containing the XML
  in :

    @{$ya->{Strings}}


pkgId: 01845c7cb23a16d6a1ca88fb67ea617fb791479e23659391b28c549d667a9e62
name: perl-XML-LibXML
arch: src
version: 2.0210
epoch: 0
release: 1.1
summary: Interface to Gnome libxml2 xml parsing and DOM library
url: https://metacpan.org/release/XML-LibXML
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
location_href: perl-XML-LibXML/perl-XML-LibXML-2.0210-1.1.src.rpm
checksum_type: sha256
description:
  This module is an interface to libxml2, providing XML and HTML parsers with
  DOM, SAX and XMLReader interfaces, a large subset of DOM Layer 3 interface
  and a XML::XPath-like interface to XPath API of libxml2. The module is
  split into several packages which are not described in this section; unless
  stated otherwise, you only need to 'use XML::LibXML;' in your programs.


pkgId: 9019768dd5a7c09f0603a6210d850e157bb985305fb867f20e71bd3237255707
name: perl-XML-LibXML-Simple
arch: noarch
version: 1.01
epoch: 0
release: 1.1
summary: XML::LibXML clone of XML::Simple::XMLin()
url: https://metacpan.org/release/XML-LibXML-Simple
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-XML-LibXML-Simple-1.01-1.1.src.rpm
location_href: perl-XML-LibXML-Simple/perl-XML-LibXML-Simple-1.01-1.1.noarch.rpm
checksum_type: sha256
description:
  This module is a blunt rewrite of XML::Simple (by Grant McLean) to use the
  XML::LibXML parser for XML structures, where the original uses plain Perl
  or SAX parsers.

  *Be warned:* this module thinks to be smart. You may very well shoot
  yourself in the foot with this DWIMmery. Read the whole manual page at
  least once before you start using it. If your XML is described in a schema
  or WSDL, then use XML::Compile for maintainable code.


pkgId: b27cf7107a6900b9241ec822377f405cf32193737ba9de6a9ea776210c42a198
name: perl-XML-LibXML-debuginfo
arch: x86_64
version: 2.0210
epoch: 0
release: 1.1
summary: Debug information for package perl-XML-LibXML
url: https://metacpan.org/release/XML-LibXML
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-XML-LibXML-2.0210-1.1.src.rpm
location_href: perl-XML-LibXML/perl-XML-LibXML-debuginfo-2.0210-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-XML-LibXML.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 7c7078a51eda6f18fcb417932d49e71c0873cad4533e13d402a1405b4fbd8daf
name: perl-XML-LibXML-debugsource
arch: x86_64
version: 2.0210
epoch: 0
release: 1.1
summary: Debug sources for package perl-XML-LibXML
url: https://metacpan.org/release/XML-LibXML
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-XML-LibXML-2.0210-1.1.src.rpm
location_href: perl-XML-LibXML/perl-XML-LibXML-debugsource-2.0210-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package perl-XML-LibXML.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: afd9d0ca09d8a37283bd3a3f3442201ceaf43c3dca783377e549d70844d1e211
name: perl-XML-LibXSLT
arch: src
version: 2.003000
epoch: 0
release: 1.1
summary: Interface to GNOME libxslt library
url: https://metacpan.org/release/XML-LibXSLT
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
location_href: perl-XML-LibXSLT/perl-XML-LibXSLT-2.003000-1.1.src.rpm
checksum_type: sha256
description:
  This module is an interface to the GNOME project's libxslt. This is an
  extremely good XSLT engine, highly compliant and also very fast. I have
  tests showing this to be more than twice as fast as Sablotron.


pkgId: 57b2acb14751fe5df1e8756526918159ec9d24a5aacf5f5af1b1a0d82509f097
name: perl-XML-LibXSLT-debuginfo
arch: x86_64
version: 2.003000
epoch: 0
release: 1.1
summary: Debug information for package perl-XML-LibXSLT
url: https://metacpan.org/release/XML-LibXSLT
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-XML-LibXSLT-2.003000-1.1.src.rpm
location_href: perl-XML-LibXSLT/perl-XML-LibXSLT-debuginfo-2.003000-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-XML-LibXSLT.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 2289172db1a6d836e63d5c814e03528bb82a5a2f621b46a2cf67639991d4f646
name: perl-XML-LibXSLT-debugsource
arch: x86_64
version: 2.003000
epoch: 0
release: 1.1
summary: Debug sources for package perl-XML-LibXSLT
url: https://metacpan.org/release/XML-LibXSLT
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-XML-LibXSLT-2.003000-1.1.src.rpm
location_href: perl-XML-LibXSLT/perl-XML-LibXSLT-debugsource-2.003000-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package perl-XML-LibXSLT.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: 52703adf4b5f30417aa9f0b7c53b46f9bca7682f2de9a7c1576552acce8325b3
name: perl-XML-NamespaceSupport
arch: noarch
version: 1.12
epoch: 0
release: 1.1
summary: Simple Generic Namespace Processor
url: http://search.cpan.org/dist/XML-NamespaceSupport/
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-XML-NamespaceSupport-1.12-1.1.src.rpm
location_href: perl-XML-NamespaceSupport/perl-XML-NamespaceSupport-1.12-1.1.noarch.rpm
checksum_type: sha256
description:
  This module offers a simple to process namespaced XML names (unames) from
  within any application that may need them. It also helps maintain a prefix
  to namespace URI map, and provides a number of basic checks.

  The model for this module is SAX2's NamespaceSupport class, readable at
  http://www.saxproject.org/namespaces.html It adds a few perlisations where
  we thought it appropriate.


pkgId: ae47b1e0910bf70d96dda97eb52411fd029d2d3af7509a397dfe61805fb49616
name: perl-XML-Parser
arch: src
version: 2.470.0
epoch: 0
release: 1.1
summary: Perl module for parsing XML documents
url: https://metacpan.org/release/XML-Parser
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
location_href: perl-XML-Parser/perl-XML-Parser-2.470.0-1.1.src.rpm
checksum_type: sha256
description:
  This module provides ways to parse XML documents. It is built on top of
  XML::Parser::Expat, which is a lower level interface to James Clark's expat
  library. Each call to one of the parsing methods creates a new instance of
  XML::Parser::Expat which is then used to parse the document. Expat options
  may be provided when the XML::Parser object is created. These options are
  then passed on to the Expat object on each parse call. They can also be
  given as extra arguments to the parse methods, in which case they override
  options given at XML::Parser creation time.

  The behavior of the parser is controlled either by 'STYLES' and/or
  'HANDLERS' options, or by setHandlers method. These all provide mechanisms
  for XML::Parser to set the handlers needed by XML::Parser::Expat. If
  neither 'Style' nor 'Handlers' are specified, then parsing just checks the
  document for being well-formed.

  When underlying handlers get called, they receive as their first parameter
  the _Expat_ object, not the Parser object.


pkgId: ebdc3c326abb242d28cd73d68af3538663d3deb5f0fbc0b6e97053b7c5ad9b33
name: perl-XML-Parser-debuginfo
arch: x86_64
version: 2.470.0
epoch: 0
release: 1.1
summary: Debug information for package perl-XML-Parser
url: https://metacpan.org/release/XML-Parser
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-XML-Parser-2.470.0-1.1.src.rpm
location_href: perl-XML-Parser/perl-XML-Parser-debuginfo-2.470.0-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-XML-Parser.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: cd894793968fda77c905b8d3743405919ea3dc2b31d8fd52e98f020455ae789f
name: perl-XML-Parser-debugsource
arch: x86_64
version: 2.470.0
epoch: 0
release: 1.1
summary: Debug sources for package perl-XML-Parser
url: https://metacpan.org/release/XML-Parser
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-XML-Parser-2.470.0-1.1.src.rpm
location_href: perl-XML-Parser/perl-XML-Parser-debugsource-2.470.0-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package perl-XML-Parser.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: 99adeb59490e6fe6bb6641c1ec901ad3be9d9ca2b51289fcd0121afc7a570cee
name: perl-XML-RegExp
arch: noarch
version: 0.04
epoch: 0
release: 1.1
summary: Regular expressions for XML tokens
url: http://search.cpan.org/dist/XML-RegExp/
rpm_license: GPL-1.0+ or Artistic-1.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-XML-RegExp-0.04-1.1.src.rpm
location_href: perl-XML-RegExp/perl-XML-RegExp-0.04-1.1.noarch.rpm
checksum_type: sha256
description:
  This package contains regular expressions for the following XML tokens:
  BaseChar, Ideographic, Letter, Digit, Extender, CombiningChar, NameChar,
  EntityRef, CharRef, Reference, Name, NmToken, and AttValue.

  The definitions of these tokens were taken from the XML spec (Extensible
  Markup Language 1.0) at the http://www.w3.org/TR/REC-xml manpage.

  Also contains the regular expressions for the following tokens from the XML
  Namespaces spec at the http://www.w3.org/TR/REC-xml-names manpage:
  NCNameChar, NCName, QName, Prefix and LocalPart.


pkgId: bddd5436fb2567a8f61afb5df10b36c5030c90d8bf47b2a249f694b360458ef7
name: perl-XML-SAX
arch: noarch
version: 1.02
epoch: 0
release: 1.1
summary: Simple API for XML
url: https://metacpan.org/release/XML-SAX
rpm_license: GPL-1.0-or-later OR Artistic-1.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-XML-SAX-1.02-1.1.src.rpm
location_href: perl-XML-SAX/perl-XML-SAX-1.02-1.1.noarch.rpm
checksum_type: sha256
description:
  XML::SAX is a SAX parser access API for Perl. It includes classes and APIs
  required for implementing SAX drivers, along with a factory class for
  returning any SAX parser installed on the user's system.


pkgId: 6213cc775f217d5b7fdcd781a4e67e415845170a38f314491109397ac4501d49
name: perl-XML-SAX-Base
arch: noarch
version: 1.09
epoch: 0
release: 1.1
summary: Base class SAX Drivers and Filters
url: http://search.cpan.org/dist/XML-SAX-Base/
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-XML-SAX-Base-1.09-1.1.src.rpm
location_href: perl-XML-SAX-Base/perl-XML-SAX-Base-1.09-1.1.noarch.rpm
checksum_type: sha256
description:
  This module has a very simple task - to be a base class for PerlSAX drivers
  and filters. It's default behaviour is to pass the input directly to the
  output unchanged. It can be useful to use this module as a base class so
  you don't have to, for example, implement the characters() callback.

  The main advantages that it provides are easy dispatching of events the
  right way (ie it takes care for you of checking that the handler has
  implemented that method, or has defined an AUTOLOAD), and the guarantee
  that filters will pass along events that they aren't implementing to
  handlers downstream that might nevertheless be interested in them.


pkgId: dd8ac94f314e4842f57db4f34993333ab8a4dae5a28b6929979a1407421968ef
name: perl-XML-SAX-Expat
arch: noarch
version: 0.51
epoch: 0
release: 1.1
summary: SAX2 Driver for Expat (XML::Parser)
url: http://search.cpan.org/dist/XML-SAX-Expat/
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-XML-SAX-Expat-0.51-1.1.src.rpm
location_href: perl-XML-SAX-Expat/perl-XML-SAX-Expat-0.51-1.1.noarch.rpm
checksum_type: sha256
description:
  This is an implementation of a SAX2 driver sitting on top of Expat
  (XML::Parser) which Ken MacLeod posted to perl-xml and which I have
  updated.

  It is still incomplete, though most of the basic SAX2 events should be
  available. The SAX2 spec is currently available from
  http://perl-xml.sourceforge.net/perl-sax/.

  A more friendly URL as well as a PODification of the spec are in the works.


pkgId: b57c875feb847d1aa9990c3470381273fca369ad3f8f986836772c5c16507c09
name: perl-XML-Simple
arch: noarch
version: 2.25
epoch: 0
release: 1.1
summary: An API for simple XML files
url: http://search.cpan.org/dist/XML-Simple/
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-XML-Simple-2.25-1.1.src.rpm
location_href: perl-XML-Simple/perl-XML-Simple-2.25-1.1.noarch.rpm
checksum_type: sha256
description:
  The XML::Simple module provides a simple API layer on top of an underlying
  XML parsing module (either XML::Parser or one of the SAX2 parser modules).
  Two functions are exported: 'XMLin()' and 'XMLout()'. Note: you can
  explicitly request the lower case versions of the function names:
  'xml_in()' and 'xml_out()'.

  The simplest approach is to call these two functions directly, but an
  optional object oriented interface (see "OPTIONAL OO INTERFACE" below)
  allows them to be called as methods of an *XML::Simple* object. The object
  interface can also be used at either end of a SAX pipeline.


pkgId: 906b1a1aa4a0ac2d34b13a9ae573b05cfc5e80b2b5d365aa52e77a63c1b462cc
name: perl-XML-Structured
arch: src
version: 1.3
epoch: 0
release: 1.1
summary: Simple conversion API from XML to perl structures and back
url: https://github.com/openSUSE/perl-XML-Structured
rpm_license: Artistic-1.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
location_href: perl-XML-Structured/perl-XML-Structured-1.3-1.1.src.rpm
checksum_type: sha256
description:
  Provides a way to convert XML data into a predefined perl data structure and
  back to XML. Unlike with modules like XML::Simple, it is an error if the XML
  data does not match the provided skeleton (the "DTD").
  Another advantage is that the order of the attributes and elements is taken
  from the DTD when converting back to xml.


pkgId: 43e6935ccb80ec05c32769c8fac9fd7440bb73de43fef5b9e8417c2f19219b64
name: perl-XML-Structured-debuginfo
arch: x86_64
version: 1.3
epoch: 0
release: 1.1
summary: Debug information for package perl-XML-Structured
url: https://github.com/openSUSE/perl-XML-Structured
rpm_license: Artistic-1.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-XML-Structured-1.3-1.1.src.rpm
location_href: perl-XML-Structured/perl-XML-Structured-debuginfo-1.3-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-XML-Structured.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 3c038ec969479de4b8b420e3a8816ad64886e84376e5cd494c9cfdd9b6249487
name: perl-XML-Structured-debugsource
arch: x86_64
version: 1.3
epoch: 0
release: 1.1
summary: Debug sources for package perl-XML-Structured
url: https://github.com/openSUSE/perl-XML-Structured
rpm_license: Artistic-1.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-XML-Structured-1.3-1.1.src.rpm
location_href: perl-XML-Structured/perl-XML-Structured-debugsource-1.3-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package perl-XML-Structured.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: edf0294e9c497fc6d83b4a68275ed14d76e8627d2a552d81883cb5608fc86c2d
name: perl-XML-Twig
arch: noarch
version: 3.52
epoch: 0
release: 1.1
summary: Perl Module for Processing Huge Xml Documents in Tree Mode
url: https://metacpan.org/release/XML-Twig
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-XML-Twig-3.52-1.1.src.rpm
location_href: perl-XML-Twig/perl-XML-Twig-3.52-1.1.noarch.rpm
checksum_type: sha256
description:
  This module provides a way to process XML documents. It is build on top of
  'XML::Parser'.

  The module offers a tree interface to the document, while allowing you to
  output the parts of it that have been completely processed.

  It allows minimal resource (CPU and memory) usage by building the tree only
  for the parts of the documents that need actual processing, through the use
  of the 'twig_roots ' and 'twig_print_outside_roots ' options. The 'finish '
  and 'finish_print ' methods also help to increase performances.

  XML::Twig tries to make simple things easy so it tries its best to takes
  care of a lot of the (usually) annoying (but sometimes necessary) features
  that come with XML and XML::Parser.


pkgId: f3ee64fe23c0fce712c121b7e4fc1bc91898a180a92761d722c61b80723c631f
name: perl-XML-Writer
arch: noarch
version: 0.900
epoch: 0
release: 1.1
summary: Perl extension for writing XML documents
url: https://metacpan.org/release/XML-Writer
rpm_license: MIT
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-XML-Writer-0.900-1.1.src.rpm
location_href: perl-XML-Writer/perl-XML-Writer-0.900-1.1.noarch.rpm
checksum_type: sha256
description:
  XML::Writer is a helper module for Perl programs that write an XML
  document. The module handles all escaping for attribute values and
  character data and constructs different types of markup, such as tags,
  comments, and processing instructions.

  By default, the module performs several well-formedness checks to catch
  errors during output. This behaviour can be extremely useful during
  development and debugging, but it can be turned off for production-grade
  code.

  The module can operate either in regular mode in or Namespace processing
  mode. In Namespace mode, the module will generate Namespace Declarations
  itself, and will perform additional checks on the output.

  Additional support is available for a simplified data mode with no mixed
  content: newlines are automatically inserted around elements and elements
  can optionally be indented based as their nesting level.


pkgId: 72e996ca6f85b9d9b5bc0d0af287588adec4d28dbf9a67d617a2e4fa89c14197
name: perl-XML-Writer-String
arch: src
version: 0.1
epoch: 0
release: 1.1
summary: Capture output from XML::Writer
url: http://search.cpan.org/perldoc?XML::Writer::String
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
location_href: perl-XML-Writer-String/perl-XML-Writer-String-0.1-1.1.src.rpm
checksum_type: sha256
description:
  This module implements a bare-bones class specifically for the purpose of
  capturing data from the XML::Writer module. XML::Writer expects an IO::Handle
  object and writes XML data to the specified object (or STDOUT) via it's print()
  method. This module simulates such an object for the specific purpose of
  providing the required print() method.

  It is recommended that $writer->end() is called prior to calling $s->value() to
  check for well-formedness.

  Author:
  -------
      Simon Oliver <simon.oliver@umist.ac.uk>


pkgId: 79e9e42b7b71ab2c2ef12416df94d3922074ae7bc004b33d90fc8813f79c95e2
name: perl-XML-XPath
arch: noarch
version: 1.48
epoch: 0
release: 1.1
summary: Parse and evaluate XPath statements
url: https://metacpan.org/release/XML-XPath
rpm_license: Artistic-2.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-XML-XPath-1.48-1.1.src.rpm
location_href: perl-XML-XPath/perl-XML-XPath-1.48-1.1.noarch.rpm
checksum_type: sha256
description:
  This module aims to comply exactly to the XPath specification at
  http://www.w3.org/TR/xpath and yet allow extensions to be added in the form
  of functions.Modules such as XSLT and XPointer may need to do this as they
  support functionality beyond XPath.


pkgId: dd569f27a2a35dfa3895b2421d3fc1d490ed65743184e1b7d88443eb2673c7c3
name: perl-XML-XPathEngine
arch: noarch
version: 0.14
epoch: 0
release: 1.1
summary: Re-usable XPath engine for DOM-like trees
url: http://search.cpan.org/dist/XML-XPathEngine/
rpm_license: GPL-1.0+ or Artistic-1.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-XML-XPathEngine-0.14-1.1.src.rpm
location_href: perl-XML-XPathEngine/perl-XML-XPathEngine-0.14-1.1.noarch.rpm
checksum_type: sha256
description:
  This module provides an XPath engine, that can be re-used by other
  module/classes that implement trees.

  In order to use the XPath engine, nodes in the user module need to mimick
  DOM nodes. The degree of similitude between the user tree and a DOM
  dictates how much of the XPath features can be used. A module implementing
  all of the DOM should be able to use this module very easily (you might
  need to add the cmp method on nodes in order to get ordered result sets).

  This code is a more or less direct copy of the the XML::XPath manpage
  module by Matt Sergeant. I only removed the XML processing part to remove
  the dependency on XML::Parser, applied a couple of patches, renamed a whole
  lot of methods to make Pod::Coverage happy, and changed the docs.

  The article eXtending XML XPath,
  http://www.xmltwig.com/article/extending_xml_xpath/ should give authors who
  want to use this module enough background to do so.

  Otherwise, my email is below ;--)

  *WARNING*: while the underlying code is rather solid, this module mostly
  lacks docs. As they say, "patches welcome"...


pkgId: d0eabd41038a37e951421f48f6b50b3c341cdb7fd0e6f172fdb3367ca2c061fc
name: perl-XS-Parse-Keyword
arch: src
version: 0.440.0
epoch: 0
release: 1.1
summary: XS functions to assist in parsing keyword syntax
url: https://metacpan.org/release/XS-Parse-Keyword
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
location_href: perl-XS-Parse-Keyword/perl-XS-Parse-Keyword-0.440.0-1.1.src.rpm
checksum_type: sha256
description:
  This module provides some XS functions to assist in writing syntax modules
  that provide new perl-visible syntax, primarily for authors of keyword
  plugins using the 'PL_keyword_plugin' hook mechanism. It is unlikely to be
  of much use to anyone else; and highly unlikely to be any use when writing
  perl code using these. Unless you are writing a keyword plugin using XS,
  this module is not for you.

  This module is also currently experimental, and the design is still
  evolving and subject to change. Later versions may break ABI compatibility,
  requiring changes or at least a rebuild of any module that depends on it.


pkgId: 03e5deb1266479492ce4a5a5a3059406390be0aeb7089642544c038121308a0d
name: perl-XS-Parse-Keyword-debuginfo
arch: x86_64
version: 0.440.0
epoch: 0
release: 1.1
summary: Debug information for package perl-XS-Parse-Keyword
url: https://metacpan.org/release/XS-Parse-Keyword
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-XS-Parse-Keyword-0.440.0-1.1.src.rpm
location_href: perl-XS-Parse-Keyword/perl-XS-Parse-Keyword-debuginfo-0.440.0-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-XS-Parse-Keyword.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: cec1a2c19bebf12d2ee32ca444db0b22121c05e7f04ad28bcfd0353c8342a885
name: perl-XS-Parse-Keyword-debugsource
arch: x86_64
version: 0.440.0
epoch: 0
release: 1.1
summary: Debug sources for package perl-XS-Parse-Keyword
url: https://metacpan.org/release/XS-Parse-Keyword
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-XS-Parse-Keyword-0.440.0-1.1.src.rpm
location_href: perl-XS-Parse-Keyword/perl-XS-Parse-Keyword-debugsource-0.440.0-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package perl-XS-Parse-Keyword.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: 4bf45be28dab845da79d69fd7771688633c4814e947d54d95c4d4837e5159576
name: perl-XSLoader
arch: src
version: 0.24
epoch: 0
release: 1.1
summary: Dynamically load C libraries into Perl code
url: http://search.cpan.org/dist/XSLoader/
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
location_href: perl-XSLoader/perl-XSLoader-0.24-1.1.src.rpm
checksum_type: sha256
description:
  This module defines a standard _simplified_ interface to the dynamic
  linking mechanisms available on many platforms. Its primary purpose is to
  implement cheap automatic dynamic loading of Perl modules.

  For a more complicated interface, see DynaLoader. Many (most) features of
  'DynaLoader' are not implemented in 'XSLoader', like for example the
  'dl_load_flags', not honored by 'XSLoader'.


pkgId: 97164ab498294922dca40436cec7f973e89d74625a1f38ea953b51a784347f23
name: perl-XString
arch: src
version: 0.005
epoch: 0
release: 1.1
summary: Isolated String helpers from B
url: https://metacpan.org/release/XString
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
location_href: perl-XString/perl-XString-0.005-1.1.src.rpm
checksum_type: sha256
description:
  XString provides the B string helpers in one isolated package. Right now
  only cstring and perlstring are available.


pkgId: 4eb7dd8cc85e3e36dca0b9c7b1603707f2f2a97ae305a6d41c586c667dfea32d
name: perl-XString-debuginfo
arch: x86_64
version: 0.005
epoch: 0
release: 1.1
summary: Debug information for package perl-XString
url: https://metacpan.org/release/XString
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-XString-0.005-1.1.src.rpm
location_href: perl-XString/perl-XString-debuginfo-0.005-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-XString.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 66956e147dbf5a8d1a173a731881d0f33da846a498e0de491055aed18aaa8ed9
name: perl-XString-debugsource
arch: x86_64
version: 0.005
epoch: 0
release: 1.1
summary: Debug sources for package perl-XString
url: https://metacpan.org/release/XString
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-XString-0.005-1.1.src.rpm
location_href: perl-XString/perl-XString-debugsource-0.005-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package perl-XString.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: 0eed4d455320881236c428fad77efb82b715202083b82050d3ac413b198aefec
name: perl-YAML
arch: noarch
version: 1.310.0
epoch: 0
release: 1.1
summary: YAML Ain't Markup Language™
url: https://metacpan.org/release/YAML
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-YAML-1.310.0-1.1.src.rpm
location_href: perl-YAML/perl-YAML-1.310.0-1.1.noarch.rpm
checksum_type: sha256
description:
  The YAML.pm module implements a YAML Loader and Dumper based on the YAML
  1.0 specification. http://www.yaml.org/spec/

  YAML is a generic data serialization language that is optimized for human
  readability. It can be used to express the data structures of most modern
  programming languages. (Including Perl!!!)

  For information on the YAML syntax, please refer to the YAML specification.


pkgId: a01a919ca5a3f58eb04e6f9f8409070889e214ac1fd58164ae3c858804b8e53a
name: perl-YAML-LibYAML-debuginfo
arch: x86_64
version: 0.890.0
epoch: 0
release: 1.1
summary: Debug information for package perl-YAML-LibYAML
url: https://metacpan.org/release/YAML-LibYAML
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-YAML-LibYAML-0.890.0-1.1.src.rpm
location_href: perl-YAML-LibYAML/perl-YAML-LibYAML-debuginfo-0.890.0-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-YAML-LibYAML.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: e45183a80159c9eeba7703c9a9a53a6bcbfff90504ea7748650f077a420a3c64
name: perl-YAML-LibYAML-debugsource
arch: x86_64
version: 0.890.0
epoch: 0
release: 1.1
summary: Debug sources for package perl-YAML-LibYAML
url: https://metacpan.org/release/YAML-LibYAML
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-YAML-LibYAML-0.890.0-1.1.src.rpm
location_href: perl-YAML-LibYAML/perl-YAML-LibYAML-debugsource-0.890.0-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package perl-YAML-LibYAML.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: 266ab4ed15492085d565a96932c80a88d3cc991d2d1e180a36dac31d5ac5150e
name: perl-YAML-Tiny
arch: noarch
version: 1.74
epoch: 0
release: 1.1
summary: Read/Write YAML files with as little code as possible
url: https://metacpan.org/release/YAML-Tiny
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
rpm_sourcerpm: perl-YAML-Tiny-1.74-1.1.src.rpm
location_href: perl-YAML-Tiny/perl-YAML-Tiny-1.74-1.1.noarch.rpm
checksum_type: sha256
description:
  *YAML::Tiny* is a perl class for reading and writing YAML-style files,
  written with as little code as possible, reducing load time and memory
  overhead.

  Most of the time it is accepted that Perl applications use a lot of memory
  and modules. The *::Tiny* family of modules is specifically intended to
  provide an ultralight and zero-dependency alternative to many more-thorough
  standard modules.

  This module is primarily for reading human-written files (like simple
  config files) and generating very simple human-readable files. Note that I
  said *human-readable* and not *geek-readable*. The sort of files that your
  average manager or secretary should be able to look at and make sense of.

  YAML::Tiny does not generate comments, it won't necessarily preserve the
  order of your hashes, and it will normalise if reading in and writing out
  again.

  It only supports a very basic subset of the full YAML specification.

  Usage is targeted at files like Perl's META.yml, for which a small and
  easily-embeddable module is extremely attractive.

  Features will only be added if they are human readable, and can be written
  in a few lines of code. Please don't be offended if your request is
  refused. Someone has to draw the line, and for YAML::Tiny that someone is
  me.

  If you need something with more power move up to YAML (7 megabytes of
  memory overhead) or YAML::XS (6 megabytes memory overhead and requires a C
  compiler).

  To restate, YAML::Tiny does *not* preserve your comments, whitespace, or
  the order of your YAML data. But it should round-trip from Perl structure
  to file and back again just fine.


pkgId: c5da204aaf6df747f5c138e9c0525b453be0206118e5adf4d6371b71613792e4
name: perl-apparmor
arch: x86_64
version: 4.0.2
epoch: 0
release: 1.1
summary: Perl interface for libapparmor functions
url: https://gitlab.com/apparmor/apparmor/
rpm_license: GPL-2.0-only AND LGPL-2.1-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: apparmor-4.0.2-1.1.src.rpm
location_href: apparmor/perl-apparmor-4.0.2-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides the perl interface to AppArmor. It is used for perl
  applications interfacing with AppArmor.


pkgId: bf132c1d1934617f7845db56133a0c120428b8b6ee13fc59f47482be44553ce7
name: perl-apparmor-debuginfo
arch: x86_64
version: 4.0.2
epoch: 0
release: 1.1
summary: Debug information for package perl-apparmor
url: https://gitlab.com/apparmor/apparmor/
rpm_license: GPL-2.0-only AND LGPL-2.1-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: apparmor-4.0.2-1.1.src.rpm
location_href: apparmor/perl-apparmor-debuginfo-4.0.2-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-apparmor.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 4212119d44fd3ae571c7624ac6ebe8f49d117ca1106e481de5ad6d67f0419f5f
name: perl-autovivification
arch: src
version: 0.18
epoch: 0
release: 1.1
summary: Lexically disable autovivification
url: http://search.cpan.org/dist/autovivification/
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
location_href: perl-autovivification/perl-autovivification-0.18-1.1.src.rpm
checksum_type: sha256
description:
  When an undefined variable is dereferenced, it gets silently upgraded to an
  array or hash reference (depending of the type of the dereferencing). This
  behaviour is called _autovivification_ and usually does what you mean (e.g.
  when you store a value) but it may be unnatural or surprising because your
  variables gets populated behind your back. This is especially true when
  several levels of dereferencing are involved, in which case all levels are
  vivified up to the last, or when it happens in intuitively read-only
  constructs like 'exists'.

  This pragma lets you disable autovivification for some constructs and
  optionally throws a warning or an error when it would have happened.


pkgId: 7b8d8a506222eb06c8a13a367d030a5a7d4d25bf85410d26f18168467a4dd361
name: perl-autovivification-debuginfo
arch: x86_64
version: 0.18
epoch: 0
release: 1.1
summary: Debug information for package perl-autovivification
url: http://search.cpan.org/dist/autovivification/
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-autovivification-0.18-1.1.src.rpm
location_href: perl-autovivification/perl-autovivification-debuginfo-0.18-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-autovivification.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: caef1ce0eaa256f297c1ada60c74e57f69fbc82e4be147a20fc0cd0ae69a9721
name: perl-autovivification-debugsource
arch: x86_64
version: 0.18
epoch: 0
release: 1.1
summary: Debug sources for package perl-autovivification
url: http://search.cpan.org/dist/autovivification/
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-autovivification-0.18-1.1.src.rpm
location_href: perl-autovivification/perl-autovivification-debugsource-0.18-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package perl-autovivification.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: 2bf2550866d53e9eab3367b231b5a66fc817aaf4fe1656c0d30c528f93463e9e
name: perl-biber
arch: noarch
version: 2.19
epoch: 0
release: 1.1
summary: Library files of Biber a BibTeX replacement
url: https://biblatex-biber.sourceforge.net/
rpm_license: LPPL-1.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Productivity/Publishing/TeX/Utilities
rpm_buildhost: reproducible
rpm_sourcerpm: texlive-2024.20240311-1.1.src.rpm
location_href: texlive/perl-biber-2.19-1.1.noarch.rpm
checksum_type: sha256
description:
  Perl library files of Biber a BibTeX replacement for users of BibLaTeX.
  This package is required by the package texlive-biber-bin.


pkgId: e28cd4b476bd27707b702bce47d1d5d8ccb10c46594510fe61fb530e3f27aae9
name: perl-libintl-perl
arch: src
version: 1.33
epoch: 0
release: 1.1
summary: High-Level Interface to Uniforum Message Translation
url: https://metacpan.org/release/libintl-perl
rpm_license: GPL-3.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
location_href: perl-libintl-perl/perl-libintl-perl-1.33-1.1.src.rpm
checksum_type: sha256
description:
  This is an internationalization library for Perl that aims to be
  compatible with the Uniforum message translations system as implemented
  for example in GNU gettext.


pkgId: 6a1b4f13d31b2a8d74c218793aae8ec488b1772a8f959da8547f577c1967855a
name: perl-libintl-perl-debuginfo
arch: x86_64
version: 1.33
epoch: 0
release: 1.1
summary: Debug information for package perl-libintl-perl
url: https://metacpan.org/release/libintl-perl
rpm_license: GPL-3.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-libintl-perl-1.33-1.1.src.rpm
location_href: perl-libintl-perl/perl-libintl-perl-debuginfo-1.33-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-libintl-perl.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: a88e2d34d818af36bff8976ccd55e1dcf542bde2f5c17ee3ccf820a579bdaa8a
name: perl-libintl-perl-debugsource
arch: x86_64
version: 1.33
epoch: 0
release: 1.1
summary: Debug sources for package perl-libintl-perl
url: https://metacpan.org/release/libintl-perl
rpm_license: GPL-3.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: perl-libintl-perl-1.33-1.1.src.rpm
location_href: perl-libintl-perl/perl-libintl-perl-debugsource-1.33-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package perl-libintl-perl.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: 0c762ce6ea17b93802c0794f4fdcbf5a3b796f8e568c292ab194d188c3323951
name: perl-libxml-perl
arch: src
version: 0.08
epoch: 0
release: 1.1
summary: Collection of Perl modules for working with XML
url: http://cpan.org/modules/by-module/XML/
rpm_license: Artistic-1.0 OR GPL-2.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
location_href: perl-libxml-perl/perl-libxml-perl-0.08-1.1.src.rpm
checksum_type: sha256
description:
  perl-libxml-perl is a collection of Perl modules for working with XML.



  Authors:
  --------
      Ken MacLeod <ken@bitsko.slc.ut.us>


pkgId: 6e330c8f7a6a78c9ad4d784f7c78faaa7fe2dafb1b8a0c18ccf35ad3ae6ba2ad
name: perl-namespace-autoclean
arch: noarch
version: 0.29
epoch: 0
release: 1.1
summary: Keep imports out of your namespace
url: https://metacpan.org/release/namespace-autoclean
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: perl-namespace-autoclean-0.29-1.1.src.rpm
location_href: perl-namespace-autoclean/perl-namespace-autoclean-0.29-1.1.noarch.rpm
checksum_type: sha256
description:
  When you import a function into a Perl package, it will naturally also be
  available as a method.

  The 'namespace::autoclean' pragma will remove all imported symbols at the
  end of the current package's compile cycle. Functions called in the package
  itself will still be bound by their name, but they won't show up as methods
  on your class or instances.

  This module is very similar to namespace::clean, except it will clean all
  imported functions, no matter if you imported them before or after you
  'use'd the pragma. It will also not touch anything that looks like a
  method.

  If you're writing an exporter and you want to clean up after yourself (and
  your peers), you can use the '-cleanee' switch to specify what package to
  clean:

    package My::MooseX::namespace::autoclean;
    use strict;

    use namespace::autoclean (); # no cleanup, just load

    sub import {
        namespace::autoclean->import(
          -cleanee => scalar(caller),
        );
    }


pkgId: 4fa55a9f5aab09ac39a4022b131e04faf0f1d473949bb8e13b49fb67095d1bc0
name: perl-razor-agents
arch: x86_64
version: 2.86
epoch: 0
release: 1.1
summary: The required perl modules for razor-agents
url: http://razor.sourceforge.net/
rpm_license: Artistic-1.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Languages/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: razor-agents-2.86-1.1.src.rpm
location_href: razor-agents/perl-razor-agents-2.86-1.1.x86_64.rpm
checksum_type: sha256
description:
  razor-agents are little programs to retrieve or update information
  from the razor <http://razor.sourceforge.net/> network to exchange
  signatures of SPAM. This package contains the required perl modules.


pkgId: b8f445a9791b632213d62fad824436135b5527e4d00bebece5a488bf90c6491c
name: perl-razor-agents-debuginfo
arch: x86_64
version: 2.86
epoch: 0
release: 1.1
summary: Debug information for package perl-razor-agents
url: http://razor.sourceforge.net/
rpm_license: Artistic-1.0
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: razor-agents-2.86-1.1.src.rpm
location_href: razor-agents/perl-razor-agents-debuginfo-2.86-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-razor-agents.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 90efa2285ade3f83a4e0619800020784d412ea4f2252bf52c6cc23872dd0d633
name: perl-rrdtool
arch: x86_64
version: 1.8.0
epoch: 0
release: 1.1
summary: Perl bindings for RRDtool
url: https://oss.oetiker.ch/rrdtool/
rpm_license: GPL-2.0-or-later AND LGPL-2.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Languages/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: rrdtool-1.8.0-1.1.src.rpm
location_href: rrdtool/perl-rrdtool-1.8.0-1.1.x86_64.rpm
checksum_type: sha256
description:
  RRD is the Acronym for Round Robin Database. RRD is a system to store and
  display time-series data (i.e. network bandwidth, machine-room temperature,
  server load average). This package contains documentation on using RRD.

  This package contains the Perl bindings.


pkgId: fb242d6cc14748cf0a38549fbde478ddac2f6e4806b1e40c4cb9ea667b948813
name: perl-rrdtool-debuginfo
arch: x86_64
version: 1.8.0
epoch: 0
release: 1.1
summary: Debug information for package perl-rrdtool
url: https://oss.oetiker.ch/rrdtool/
rpm_license: GPL-2.0-or-later AND LGPL-2.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: rrdtool-1.8.0-1.1.src.rpm
location_href: rrdtool/perl-rrdtool-debuginfo-1.8.0-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-rrdtool.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 69c81a407b13e0b224d1c5e4f0afb54c714ec093a904a21998c27ccf4c2f6862
name: perl-solv-debuginfo
arch: x86_64
version: 0.7.30
epoch: 0
release: 1.1
summary: Debug information for package perl-solv
url: https://github.com/openSUSE/libsolv
rpm_license: BSD-3-Clause
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: libsolv-0.7.30-1.1.src.rpm
location_href: libsolv/perl-solv-debuginfo-0.7.30-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-solv.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 8e93f796276f1f6d2f40ec7965aa71f0ef5c24d786ad44bdab0498f316fa98eb
name: perl-yui
arch: x86_64
version: 4.6.2
epoch: 0
release: 1.1
summary: Perl bindings for libyui
url: https://github.com/libyui/libyui-bindings
rpm_license: LGPL-2.1-only OR LGPL-3.0-only
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Languages/Perl
rpm_buildhost: reproducible
rpm_sourcerpm: libyui-bindings-4.6.2-1.1.src.rpm
location_href: libyui:libyui-bindings/perl-yui-4.6.2-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides Perl language bindings to access functions of
  yast2-libyui - An User Interface engine that provides the
  abstraction from graphical user interfaces (Qt, Gtk) and text based
  user interfaces (ncurses).

  Authors:
  ---------
  -    kkaempf@suse.de
  -    dmacvicar@suse.de


pkgId: d31ef4e34a6ac5152def067bb7983f2d70a66846c71e18e2487d05443462163a
name: perl-yui-debuginfo
arch: x86_64
version: 4.6.2
epoch: 0
release: 1.1
summary: Debug information for package perl-yui
url: https://github.com/libyui/libyui-bindings
rpm_license: LGPL-2.1-only OR LGPL-3.0-only
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: libyui-bindings-4.6.2-1.1.src.rpm
location_href: libyui:libyui-bindings/perl-yui-debuginfo-4.6.2-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package perl-yui.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: c2fcfebb8c5c95e7c7cf355a28bc5df4bfd5c285fa727eb9d6118741165c1fb9
name: pesign
arch: src
version: 116
epoch: 0
release: 1.1
summary: Signing tool for PE-COFF binaries
url: https://github.com/rhinstaller/pesign
rpm_license: GPL-3.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Productivity/Security
rpm_buildhost: reproducible
location_href: pesign/pesign-116-1.1.src.rpm
checksum_type: sha256
description:
  Signing tool for PE-COFF binaries. It is vaguely compliant
  with the PE and Authenticode specifications.


pkgId: 2ab9d9665850b6949dd08a968d61492f6a382a503584fd1148336f9eddd98d47
name: pesign-debuginfo
arch: x86_64
version: 116
epoch: 0
release: 1.1
summary: Debug information for package pesign
url: https://github.com/rhinstaller/pesign
rpm_license: GPL-3.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: pesign-116-1.1.src.rpm
location_href: pesign/pesign-debuginfo-116-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package pesign.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 28c3b760d1385dcda89aa7625945d0bb48a660d7766494dd59eaccc5778e8ea8
name: pesign-debugsource
arch: x86_64
version: 116
epoch: 0
release: 1.1
summary: Debug sources for package pesign
url: https://github.com/rhinstaller/pesign
rpm_license: GPL-3.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: pesign-116-1.1.src.rpm
location_href: pesign/pesign-debugsource-116-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package pesign.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: e43d83373d025e00f162e42707050d10bad52878f5fec2e1f6cc1cac150b918d
name: pesign-obs-integration
arch: src
version: 10.2+git20240723.d344d91
epoch: 0
release: 1.1
summary: Macros and scripts to sign the kernel and bootloader
url: https://en.opensuse.org/openSUSE:UEFI_Image_File_Sign_Tools
rpm_license: GPL-2.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Tools/Other
rpm_buildhost: reproducible
location_href: pesign-obs-integration/pesign-obs-integration-10.2+git20240723.d344d91-1.1.src.rpm
checksum_type: sha256
description:
  This package provides scripts and rpm macros to automate signing of the
  boot loader, kernel and kernel modules in the openSUSE Buildservice.


pkgId: ebcfb36bc49bfd81dd972e4a52da8890749278df0a9795a816070b11b6bbe7db
name: phodav-debuginfo
arch: x86_64
version: 3.0
epoch: 0
release: 1.1
summary: Debug information for package phodav
url: https://wiki.gnome.org/phodav
rpm_license: LGPL-2.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: phodav-3.0-1.1.src.rpm
location_href: phodav/phodav-debuginfo-3.0-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package phodav.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 9b2b9f1a949c7f0c1ede3aa8822a7bc6d42264d0beed8fd19bafce644dbf7af7
name: phodav-debugsource
arch: x86_64
version: 3.0
epoch: 0
release: 1.1
summary: Debug sources for package phodav
url: https://wiki.gnome.org/phodav
rpm_license: LGPL-2.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: phodav-3.0-1.1.src.rpm
location_href: phodav/phodav-debugsource-3.0-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package phodav.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: 7a898a9d9fe7abb62b8ec92403a7091d26262fd064f80bf6c9103124a9be9945
name: phodav-devel
arch: x86_64
version: 3.0
epoch: 0
release: 1.1
summary: Development files for phodav
url: https://wiki.gnome.org/phodav
rpm_license: LGPL-2.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/C and C++
rpm_buildhost: reproducible
rpm_sourcerpm: phodav-3.0-1.1.src.rpm
location_href: phodav/phodav-devel-3.0-1.1.x86_64.rpm
checksum_type: sha256
description:
  phodav is a WebDav server implementation using libsoup (RFC 4918).

  This package provides the files needed for developing software using phodav.


pkgId: 61f245fcf8a8720e48a8e2f139dc46919bfd119ca5f01e0ee3d7cfea955fc314
name: phonon-qt5
arch: src
version: 4.12.0
epoch: 0
release: 1.1
summary: Multimedia Platform Abstraction
url: https://www.kde.org/
rpm_license: LGPL-2.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
location_href: phonon:qt5/phonon-qt5-4.12.0-1.1.src.rpm
checksum_type: sha256
description:
  Phonon is a cross-platform portable multimedia support abstraction,
  which allows you to play multiple audio or video formats with the same
  quality on all platforms, no matter which underlying architecture is
  used.


pkgId: eabad36192caf99cc630af315c9097a90124e19ea278c176e6446e287c70dfe5
name: phonon-qt5-debuginfo
arch: x86_64
version: 4.12.0
epoch: 0
release: 1.1
summary: Debug information for package phonon-qt5
url: https://www.kde.org/
rpm_license: LGPL-2.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: phonon-qt5-4.12.0-1.1.src.rpm
location_href: phonon:qt5/phonon-qt5-debuginfo-4.12.0-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package phonon-qt5.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 9e84f84a5042137801db51621b02c94d659196ca0644470f7fca25ef0d903ac2
name: phonon-qt5-debugsource
arch: x86_64
version: 4.12.0
epoch: 0
release: 1.1
summary: Debug sources for package phonon-qt5
url: https://www.kde.org/
rpm_license: LGPL-2.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: phonon-qt5-4.12.0-1.1.src.rpm
location_href: phonon:qt5/phonon-qt5-debugsource-4.12.0-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package phonon-qt5.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: a3ec7ae3a1d243a687410f7eb68da59601ba604aa5ceaf47981ecd36e86fdbe5
name: phonon-qt5-devel-debuginfo
arch: x86_64
version: 4.12.0
epoch: 0
release: 1.1
summary: Debug information for package phonon-qt5-devel
url: https://www.kde.org/
rpm_license: LGPL-2.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: phonon-qt5-4.12.0-1.1.src.rpm
location_href: phonon:qt5/phonon-qt5-devel-debuginfo-4.12.0-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package phonon-qt5-devel.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 5a0762d8e5358a47f75f1119ee712dc53f0ee40cfd6bed00fcf2a613f5b59c67
name: phonon-qt6-debuginfo
arch: x86_64
version: 4.12.0
epoch: 0
release: 1.1
summary: Debug information for package phonon-qt6
url: https://www.kde.org/
rpm_license: LGPL-2.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: phonon-qt6-4.12.0-1.1.src.rpm
location_href: phonon:qt6/phonon-qt6-debuginfo-4.12.0-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package phonon-qt6.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 0fc53fe76bd93c5263df77322ff1b99c9c64ddbd4b7597388b58aebc52e3bef0
name: phonon-qt6-debugsource
arch: x86_64
version: 4.12.0
epoch: 0
release: 1.1
summary: Debug sources for package phonon-qt6
url: https://www.kde.org/
rpm_license: LGPL-2.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: phonon-qt6-4.12.0-1.1.src.rpm
location_href: phonon:qt6/phonon-qt6-debugsource-4.12.0-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package phonon-qt6.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: 16a99fad9c2c35fc0101018222950d8bc1326b104f0d9e43f97cd6c652586e68
name: phonon-vlc-qt5
arch: src
version: 0.12.0
epoch: 0
release: 1.1
summary: Phonon VLC Backend
url: https://www.kde.org/
rpm_license: LGPL-2.1-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Unspecified
rpm_buildhost: reproducible
location_href: phonon-vlc:qt5/phonon-vlc-qt5-0.12.0-1.1.src.rpm
checksum_type: sha256
description:
  Phonon is a cross-platform portable Multimedia Support Abstraction,
  which allows you to play multiple audio or video formats with the same
  quality on all platforms, no matter which underlying architecture is
  used.

  This is the VLC backend for Phonon


pkgId: bda80d8cc43f5f89e43d84c68121fbc66d86f4d2939e6a7ce20640ee5d5faca7
name: phonon-vlc-qt5-debuginfo
arch: x86_64
version: 0.12.0
epoch: 0
release: 1.1
summary: Debug information for package phonon-vlc-qt5
url: https://www.kde.org/
rpm_license: LGPL-2.1-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: phonon-vlc-qt5-0.12.0-1.1.src.rpm
location_href: phonon-vlc:qt5/phonon-vlc-qt5-debuginfo-0.12.0-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package phonon-vlc-qt5.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 9b4441239b7228e1256605a054a1f294cc07b1f142ee77beb57298d686e1bcb2
name: phonon-vlc-qt5-debugsource
arch: x86_64
version: 0.12.0
epoch: 0
release: 1.1
summary: Debug sources for package phonon-vlc-qt5
url: https://www.kde.org/
rpm_license: LGPL-2.1-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: phonon-vlc-qt5-0.12.0-1.1.src.rpm
location_href: phonon-vlc:qt5/phonon-vlc-qt5-debugsource-0.12.0-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package phonon-vlc-qt5.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: 9b030746f9c4bc2be01bffa70f5fff128ed26ec5245e352bc03b84b8bc3dc43f
name: phonon-vlc-qt6-debuginfo
arch: x86_64
version: 0.12.0
epoch: 0
release: 1.1
summary: Debug information for package phonon-vlc-qt6
url: https://www.kde.org/
rpm_license: LGPL-2.1-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: phonon-vlc-qt6-0.12.0-1.1.src.rpm
location_href: phonon-vlc:qt6/phonon-vlc-qt6-debuginfo-0.12.0-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package phonon-vlc-qt6.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: da1f8963380c9f33a43948c0a9adddaf9cb69f1f95c9fa054b5e13d97a6254d1
name: phonon-vlc-qt6-debugsource
arch: x86_64
version: 0.12.0
epoch: 0
release: 1.1
summary: Debug sources for package phonon-vlc-qt6
url: https://www.kde.org/
rpm_license: LGPL-2.1-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: phonon-vlc-qt6-0.12.0-1.1.src.rpm
location_href: phonon-vlc:qt6/phonon-vlc-qt6-debugsource-0.12.0-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package phonon-vlc-qt6.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: 74e8c723ce7268011aa43edd808e4be9f6bac61336bc072b2b7a0502d6c0470a
name: phononsettings-qt5-debuginfo
arch: x86_64
version: 4.12.0
epoch: 0
release: 1.1
summary: Debug information for package phononsettings-qt5
url: https://www.kde.org/
rpm_license: LGPL-2.0-only OR LGPL-3.0-only
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: phonon-qt5-4.12.0-1.1.src.rpm
location_href: phonon:qt5/phononsettings-qt5-debuginfo-4.12.0-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package phononsettings-qt5.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: cfe796d6f7fd899a0714a567b2ef4d1bcb7c3ace2981d37f2d1b7180621bb6e1
name: phononsettings-qt6-debuginfo
arch: x86_64
version: 4.12.0
epoch: 0
release: 1.1
summary: Debug information for package phononsettings-qt6
url: https://www.kde.org/
rpm_license: LGPL-2.0-only OR LGPL-3.0-only
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: phonon-qt6-4.12.0-1.1.src.rpm
location_href: phonon:qt6/phononsettings-qt6-debuginfo-4.12.0-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package phononsettings-qt6.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 60742d3d83073996c8a19d167184ec75b29770f55fc9a409ce5113be1ad8e3e6
name: php8
arch: src
version: 8.3.9
epoch: 0
release: 1.1
summary: Interpreter for the PHP scripting language version 8
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/PHP
rpm_buildhost: reproducible
location_href: php8/php8-8.3.9-1.1.src.rpm
checksum_type: sha256
description:
  PHP is a server-side HTML embedded scripting language designed
  primarily for web development but also used as a general-purpose
  programming language.

  This package contains the base files for all subpackages and
  must be installed in order to use PHP. Additionally, extension
  modules and server modules (e.g. for Apache) may be installed.


pkgId: 25b2921494648f973b2cfbda318323aeb526fb40e57fcc085d3afce8f5bf9e4f
name: php8-bcmath-debuginfo
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug information for package php8-bcmath
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-bcmath-debuginfo-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package php8-bcmath.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: c2c626577c11e76a2696f3fe0645b6124054594a84eef61f4c5871f120c379bb
name: php8-bz2-debuginfo
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug information for package php8-bz2
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-bz2-debuginfo-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package php8-bz2.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: ea3632052fd0e563b588a47482a5233c4c6ca0dea4f9fc4720fc9bf099325560
name: php8-calendar-debuginfo
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug information for package php8-calendar
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-calendar-debuginfo-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package php8-calendar.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 39eaf1ff3692eec688844d321d26f8944d7ed550a9e4326be3713e293b1ec63b
name: php8-cli
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Interpreter for the PHP scripting language version 8
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/PHP
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-cli-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  PHP is a server-side HTML embedded scripting language designed
  primarily for web development but also used as a general-purpose
  programming language.

  This package contains the standard implementation of PHP, namely Zend
  PHP. Included are the PHP command-line binary and the configuration
  file (php.ini).

  Additional documentation is available in package php-doc.


pkgId: 2f115ce41420bc48c54a2f34daa85a3328357ef70b66911d31d8041ba0016396
name: php8-cli-debuginfo
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug information for package php8-cli
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-cli-debuginfo-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package php8-cli.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 6dbae7cc23f2c21dca011f73cd50ddfa1e98fa8533b2398c75bdb911ad61bd3b
name: php8-ctype
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Character class extension for PHP
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/PHP
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-ctype-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  PHP functions for checking whether a character or string falls into a
  certain character class according to the current locale.


pkgId: 32e6089e36d7da20adea251d155811984a73b12d52fb452478a3f1ed706546c5
name: php8-ctype-debuginfo
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug information for package php8-ctype
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-ctype-debuginfo-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package php8-ctype.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 3685806a38cb2b98df2cd047a11e630f3bf4425d1d29c6d707b4f78ebb414c18
name: php8-curl
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: PHP libcurl integration
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/PHP
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-curl-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  PHP interface to libcurl that allows you to connect to and communicate
  with servers of many different types, using protocols of many different
  types.


pkgId: 933803692716762df60c706fd0bccebf418792dc715598677385146d42ce67bc
name: php8-curl-debuginfo
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug information for package php8-curl
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-curl-debuginfo-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package php8-curl.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 656e5b6173e30a9959551b53d5ca4cdfc1236721f5c9dbdb978647c73b3648a4
name: php8-dba
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Database abstraction layer for PHP
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/PHP
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-dba-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This is a general abstraction layer for several file-based databases.
  As such, functionality is limited to a common subset of features
  supported by modern databases such as Sleepycat Software's DB2. (This
  is not to be confused with IBM's DB2 software, which is supported
  through the ODBC functions.)


pkgId: 41e14051608672b8fe225e509c6facaffef32d18dbe386e1a3602748c5925ab4
name: php8-dba-debuginfo
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug information for package php8-dba
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-dba-debuginfo-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package php8-dba.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 726f391653fe92f2a4996055f727f09fa5919673be5115da09917c0222a01a9c
name: php8-debuginfo
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug information for package php8
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-debuginfo-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package php8.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: f383d3b17c12691b24881c49e6f460af6e6c680fd0c2057025d8f8bd00a7dc17
name: php8-debugsource
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug sources for package php8
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-debugsource-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package php8.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: 0e502a209edc4edc54ad51eaffb43e821e18cbd253e10cde2a857721335cc8b2
name: php8-devel
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: PHP development files for C/C++ extensions
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/PHP
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-devel-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  PHP is a server-side HTML embedded scripting language designed
  primarily for web development but also used as a general-purpose
  programming language.

  This package contains the C headers to build PHP extensions.


pkgId: 36354578e9e612ef3e7aa809fc33d9e771354a599c8156c6436e9a8dd37f74ae
name: php8-dom-debuginfo
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug information for package php8-dom
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-dom-debuginfo-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package php8-dom.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 172e01c423256fc61e59582a0957093d3c164c5d64f9afb4079881105cdfc31e
name: php8-embed
arch: src
version: 8.3.9
epoch: 0
release: 1.1
summary: Embedded SAPI Library
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/PHP
rpm_buildhost: reproducible
location_href: php8:embed/php8-embed-8.3.9-1.1.src.rpm
checksum_type: sha256
description:
  PHP is a server-side, cross-platform HTML embedded scripting language.
  If you are completely new to PHP and want to get some idea of how it
  works, have a look at the Introductory tutorial. Once you get beyond
  that have a look at the example archive sites and some of the other
  resources available in the links section.


pkgId: fb842b64ba8336a6583801351587b789db67d1574645cc3788b1c7a826d5a410
name: php8-embed-debuginfo
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug information for package php8-embed
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-embed-8.3.9-1.1.src.rpm
location_href: php8:embed/php8-embed-debuginfo-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package php8-embed.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: f593d0cea20579a8a4bf94313ed9343d5c4b27377cced31b53a7d90f6d80016b
name: php8-embed-debugsource
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug sources for package php8-embed
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-embed-8.3.9-1.1.src.rpm
location_href: php8:embed/php8-embed-debugsource-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package php8-embed.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: 70016b543d8421af8cb767b6b909bb9a3bc6305a07fa521ca2a3cc895bf6b8b7
name: php8-enchant
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Spell checking extension for PHP
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/PHP
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-enchant-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  Enchant is the PHP binding for the Enchant library. Enchant steps in
  to provide uniformity and conformity on top of all spelling
  libraries, and implements certain features that may be lacking in any
  individual provider library. Everything should "just work" for any
  and every definition of "just working."


pkgId: 55c346d020fe1f91a18a7feef86da200d13eb04bd3da81c109df7f8efd8f3f6b
name: php8-enchant-debuginfo
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug information for package php8-enchant
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-enchant-debuginfo-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package php8-enchant.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 674b077feba94ce18085dc34410cd652ab33334ba63684c26c02971d497935b4
name: php8-exif
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: EXIF metadata extensions for PHP
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/PHP
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-exif-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  PHP functions for extracting EXIF (Exchangable Image File Format;
  metadata from images) information stored in headers of JPEG and TIFF
  images.


pkgId: 63be79567ca6cc63e10b3ea2726bbc9eb39f14581dbfa474aa744aab28438804
name: php8-exif-debuginfo
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug information for package php8-exif
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-exif-debuginfo-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package php8-exif.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: bf160697308fea88cdc7e3f5e68f4e086366d4662e5a3533aa27cd6c9b196b97
name: php8-fastcgi-debuginfo
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug information for package php8-fastcgi
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-fastcgi-8.3.9-1.1.src.rpm
location_href: php8:fastcgi/php8-fastcgi-debuginfo-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package php8-fastcgi.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: c18ebcd22c6bc8e5a6e2008ccad3014df26064731e3b79da94f0285965ce5e2c
name: php8-fastcgi-debugsource
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug sources for package php8-fastcgi
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-fastcgi-8.3.9-1.1.src.rpm
location_href: php8:fastcgi/php8-fastcgi-debugsource-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package php8-fastcgi.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: 50383df5e0ea11dcb3a259da1ce1a2b0d6fe8fb062ccd34609fac0de5c86b4e8
name: php8-ffi
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Main interface to C code and data
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/PHP
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-ffi-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This extension allows the loading of shared libraries (.DLL or .so),
  calling of C functions and accessing of C data structures in pure PHP,
  without having to have deep knowledge of the Zend extension API, and
  without having to learn a third "intermediate" language.


pkgId: cbd1d188bb916cf721028308e19744a625b5fca537f32e51d521f6c4b8163d99
name: php8-ffi-debuginfo
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug information for package php8-ffi
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-ffi-debuginfo-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package php8-ffi.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 755769bbe4ce3c941f18888392051cd97cb3a648a255f6477a3de5af5f87601e
name: php8-fileinfo
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: File identification extension for PHP
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/PHP
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-fileinfo-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  The functions in this module try to guess the content type and
  encoding of a file by looking for certain magic byte sequences at
  specific positions within the file. It uses (a bundled version of)
  libmagic to heuristically determine this.


pkgId: e88a1531ddccc63c1f6e0d753930668cbeb6dea0bdd8a268670c1220acaac9e9
name: php8-fileinfo-debuginfo
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug information for package php8-fileinfo
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-fileinfo-debuginfo-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package php8-fileinfo.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: f3990807c8f7e9a94058ea6c3a85b54bc25fcaadf0841cd3013417e76705d617
name: php8-fpm-apache
arch: noarch
version: 8.3.9
epoch: 0
release: 1.1
summary: Apache configuration for PHP-FPM
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/PHP
rpm_buildhost: reproducible
rpm_sourcerpm: php8-fpm-8.3.9-1.1.src.rpm
location_href: php8:fpm/php8-fpm-apache-8.3.9-1.1.noarch.rpm
checksum_type: sha256
description:
  Configuration for Apache to pass all requests for PHP scripts to the
  PHP-FPM server using reverse proxy.


pkgId: a942846cb31df2dcd83ad83ee7c4b73aad0d234e5f8804f3d3f4793ed07b7c66
name: php8-fpm-debuginfo
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug information for package php8-fpm
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-fpm-8.3.9-1.1.src.rpm
location_href: php8:fpm/php8-fpm-debuginfo-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package php8-fpm.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 7416094b7b600c401cdd595c70285a7bb029c1c85f412d10c07fab6481cbaf89
name: php8-fpm-debugsource
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug sources for package php8-fpm
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-fpm-8.3.9-1.1.src.rpm
location_href: php8:fpm/php8-fpm-debugsource-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package php8-fpm.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: 60fb5e4e1d5a0aaac1a51adf53195e9186b1b47c1a570a7547002ec7a39c13dc
name: php8-ftp
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: FTP protocol support for PHP
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/PHP
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-ftp-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  PHP functions for access to file servers speaking the File Transfer
  Protocol (FTP) as defined in RFC 959.


pkgId: 2e0a08424bcb6d382e5537065592aaf7dd7b5cef534d7c82d8bb339fbbe7ece1
name: php8-ftp-debuginfo
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug information for package php8-ftp
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-ftp-debuginfo-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package php8-ftp.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 7f161b13c0cb3595e89277fbbd57542a5367e2a5119a0ea0ea46e94a2b5275d4
name: php8-gd
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: GD Graphics Library extension for PHP
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/PHP
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-gd-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  PHP functions to create and manipulate image files in a variety of
  different image formats, including GIF, PNG, JPEG, WBMP, and XPM. Even
  more convenient: PHP can output image streams directly to a browser.


pkgId: c727d12ff20f48cd32adf9ce1ff960488d6ed3a701410caef750ec9b1d72c4c9
name: php8-gd-debuginfo
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug information for package php8-gd
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-gd-debuginfo-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package php8-gd.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 4bbf80a29c823d88ad107e9d1611dc9f13c5db8f404a5f2b83e8d96fb6de47fc
name: php8-gettext
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Native language support for PHP
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/PHP
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-gettext-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  PHP functions that implement a Native Language Support (NLS) API which
  can be used to internationalize your PHP applications.


pkgId: ef498574f94026d2872bac80f72399740b19050f0fee5e7d7a0b426a2bf7ee82
name: php8-gettext-debuginfo
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug information for package php8-gettext
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-gettext-debuginfo-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package php8-gettext.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: de5907de1d96543326f367c9f970e6435ecb4eee89afc41fcb6b133bf00072b8
name: php8-gmp-debuginfo
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug information for package php8-gmp
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-gmp-debuginfo-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package php8-gmp.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: c1d17e8706d373001f2e308584a47f8a6bbc46cdec77a53d8f62ac038db7a9e0
name: php8-iconv
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Character set conversion functions for PHP
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/PHP
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-iconv-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This module contains an interface to iconv character set conversion
  facility. With this module, a string represented by a local character
  set can be turned into another character set, which may be the
  Unicode character set. Supported character sets depend on the iconv
  implementation of your system.


pkgId: 8479e610e34403d06c8eaa3d6c604399dbb7023ce1ef3e523e51bb7cdc554205
name: php8-iconv-debuginfo
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug information for package php8-iconv
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-iconv-debuginfo-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package php8-iconv.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 73c796b541bb1c4f0ecad7b6b03479291e043adfcb89284d7c6a197a6c9938e3
name: php8-intl
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: ICU integration for PHP
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/PHP
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-intl-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  The internationalization (intl) extension is a wrapper for the ICU
  library, enabling PHP programmers to perform UCA (Unicode Collation
  Algorithm) conformant collation as well as date, time, number and
  currency formatting in their scripts.


pkgId: 959d171685c31ada63aa752391c28621d0575d7e39c0addd7cc06296130a14ae
name: php8-intl-debuginfo
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug information for package php8-intl
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-intl-debuginfo-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package php8-intl.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: ca5f8a740cf66ffc3e5712816bc0a3ca6a737f1ee30348df4ac9befe3806b736
name: php8-ldap-debuginfo
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug information for package php8-ldap
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-ldap-debuginfo-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package php8-ldap.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 7e96907918e2985b74febc81d3d40c20c276f20f15bd61ca1306d6952b19da88
name: php8-mbstring
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Multibyte string functions for PHP
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/PHP
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-mbstring-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  mbstring provides multibyte specific string functions that help
  dealing with multibyte encodings in PHP. mbstring handles character
  encoding conversion between the possible encoding pairs. mbstring
  handles Unicode-based encodings such as UTF-8 and UCS-2 and many
  single-byte encodings for convenience.


pkgId: 3bbf50da9bdd29b604f490a8eb1805b71b522a385fc1a23aee52ff6b10219aa3
name: php8-mbstring-debuginfo
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug information for package php8-mbstring
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-mbstring-debuginfo-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package php8-mbstring.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: a4dfb328a8314acfedfb409fdfa26afa396567118d595eaf1553250f6583992e
name: php8-mysql-debuginfo
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug information for package php8-mysql
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-mysql-debuginfo-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package php8-mysql.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 6a8eabcb7ecc9d6552401a77a12ce52bad71fdffc8349a21c888a5500e782d72
name: php8-odbc-debuginfo
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug information for package php8-odbc
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-odbc-debuginfo-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package php8-odbc.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 75ed04cd52b939dfa0bf97aff9d1416b2121fbb578c0db21ad257e161ad2107a
name: php8-opcache
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Opcode cache extension for PHP
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/PHP
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-opcache-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  OPcache improves PHP performance by storing precompiled script
  bytecode in shared memory, thereby removing the need for PHP to load
  and parse scripts on each request.


pkgId: 8115d572628521269bba698ff040389dd33ef4fb66dee86d477ae7b616024601
name: php8-opcache-debuginfo
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug information for package php8-opcache
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-opcache-debuginfo-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package php8-opcache.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 5772d3e9284e1099f33ff62639e516880d66f1d395cf792c3e6726f3690961ae
name: php8-openssl
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: OpenSSL integration for PHP
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/PHP
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-openssl-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This extension binds functions of OpenSSL library for symmetric and
  asymmetric encryption and decryption, PBKDF2, PKCS#7, PKCS#12, X.509
  and other crypto operations. It also provides an implementation of
  TLS streams.


pkgId: 0d1d2ff42a6a4b8b5f1dfa645f58781ece5f2baa62c2c0836762019d27f46d5d
name: php8-openssl-debuginfo
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug information for package php8-openssl
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-openssl-debuginfo-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package php8-openssl.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: e98c9f6709bb4e6907195cdfd978e0680b40e9567c2994e773879531cab89abb
name: php8-pcntl
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Process Control extension for PHP
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/PHP
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-pcntl-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  Process Control support in PHP implements the Unix style of process
  creation, program execution, signal handling and process termination
  (fork, waitpid, signal, WIF flags, etc.)


pkgId: 853ce80b15d7ba9cedbefbdcca53fb1c9ae945502aea7c50ce4c98b597be3bcb
name: php8-pcntl-debuginfo
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug information for package php8-pcntl
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-pcntl-debuginfo-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package php8-pcntl.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 86817ba4387fdd0034397a0ff5f6e2f29fb9c25f9a62c4d88f1b3b3f3f1b4a84
name: php8-pdo
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: PHP Data Objects extension for PHP
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/PHP
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-pdo-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  The PHP Data Objects (PDO) extension defines an interface for
  accessing databases in PHP. Each database driver that implements the
  PDO interface can expose database-specific features as regular
  extension functions. Note that you use a database-specific PDO driver
  to access a database server.

  PDO provides a data-access abstraction layer, which means that,
  regardless of the database used, you use the same functions to issue
  queries and fetch data. PDO does not provide a database abstraction;
  it does not rewrite SQL or emulate missing features.


pkgId: 332315debe2455addf1861df54a98d180c70f57a4e0128e529cb9f13de9812b3
name: php8-pdo-debuginfo
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug information for package php8-pdo
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-pdo-debuginfo-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package php8-pdo.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: c9029c58f24a80f33fc0bcc385ce722e5e40ef6109e8df170c8c7a14cb23aebe
name: php8-pear
arch: noarch
version: 1.10.23
epoch: 0
release: 1.1
summary: PHP Extension and Application Repository
url: https://pear.php.net/package/pearweb_phars
rpm_license: BSD-2-Clause
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/PHP
rpm_buildhost: reproducible
rpm_sourcerpm: php8-pear-1.10.23-1.1.src.rpm
location_href: php8-pear/php8-pear-1.10.23-1.1.noarch.rpm
checksum_type: sha256
description:
  PEAR is a code repository for PHP extensions and PHP library code
  similar to TeX's CTAN and Perl's CPAN. This package provides an access
  to the repository.

  See https://pear.php.net/manual for more details.


pkgId: 27ed18ceefa759caa14db1f9e7f97808a79287f01f067db685560dfd57dbca10
name: php8-pecl
arch: noarch
version: 1.10.23
epoch: 0
release: 1.1
summary: PHP Extension Community Library
url: https://pear.php.net/package/pearweb_phars
rpm_license: BSD-2-Clause
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/PHP
rpm_buildhost: reproducible
rpm_sourcerpm: php8-pear-1.10.23-1.1.src.rpm
location_href: php8-pear/php8-pecl-1.10.23-1.1.noarch.rpm
checksum_type: sha256
description:
  PECL is a repository for PHP Extensions, providing a directory of
  all known extensions and hosting facilities for downloading and
  development of PHP extensions.

  See https://pecl.php.net for more details.


pkgId: 9dd161de321d0814cd07fcd2fe91929524b930bb5dddecdd0b4acebd0399bceb
name: php8-pgsql
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: PostgreSQL database client for PHP
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/PHP
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-pgsql-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  PHP functions for access to PostgreSQL database servers. It includes
  both traditional pgsql and pdo_pgsql drivers.


pkgId: 0294fbf26600f2ff71bb9375c4041fe02d048ac7412e6ae9d4f4886f21fe604e
name: php8-pgsql-debuginfo
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug information for package php8-pgsql
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-pgsql-debuginfo-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package php8-pgsql.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 511c76b88f188c34edec21329cfc19b7c949454ebcca3a3df49e6e61b5e9b47f
name: php8-phar
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: PHP Archive extension for PHP
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/PHP
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-phar-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  The phar extension provides a way to put entire PHP applications into
  a single file called a "phar" (PHP Archive) for distribution and
  installation.

  In addition, the phar extension also provides a file-format
  abstraction method for creating and manipulating tar and zip files
  through the PharData class, much as PDO provides a unified interface
  for accessing different databases. Phar also can convert between tar,
  zip and phar file formats.


pkgId: 87beb24ef0077eb8837f3bf5a255c0323d02804b94631800c89ced03a9997218
name: php8-phar-debuginfo
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug information for package php8-phar
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-phar-debuginfo-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package php8-phar.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 57a34a3dc0c80600c04c226680a9f357b6924d4fefe67978985cf1b201472eb6
name: php8-posix
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: POSIX functions for PHP
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/PHP
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-posix-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This module contains an interface to those functions defined in the
  IEEE 1003.1 (POSIX.1) standards document which are not accessible
  through other means.


pkgId: 45dd99061bc6a35c272c8c0aa8f96155cc1e571f621d70abdcc8bf5133e059e1
name: php8-posix-debuginfo
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug information for package php8-posix
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-posix-debuginfo-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package php8-posix.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: bbea58e5a064f6aa6b4e3073aa9b929614f7673dcfcd875fd9c3e0be14c94cc6
name: php8-readline
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: PHP readline extension
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/PHP
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-readline-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  PHP interface to libedit, which provides editable command line as well
  as PHP interactive mode (php -a).


pkgId: c8ec80f91ab6cbe7c30936d97aa882145ffe758e53920dd6c81ab7a5e8d20018
name: php8-readline-debuginfo
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug information for package php8-readline
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-readline-debuginfo-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package php8-readline.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: fe18a3d2799eec9eee9599c5645a583a134b33fe167272e083734a5ccb250b17
name: php8-shmop-debuginfo
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug information for package php8-shmop
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-shmop-debuginfo-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package php8-shmop.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 6ed402daec5d6ddb04ebbe624061ee4e523ac1bdcde4553304a79fb266f0fb76
name: php8-snmp
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: SNMP extension for PHP
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/PHP
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-snmp-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  The SNMP extension provides a toolset for managing remote devices via
  the Simple Network Management Protocol.

  As it is a wrapper around the underlying Net-SNMP library, all basic
  concepts are the same and the PHP functions change their behavior
  depending on the Net-SNMP configuration files and environment
  variables.


pkgId: 9d6823f6119425ef15bb03af8a5c2097f091599524b224e7dc8f0c3b3417a31f
name: php8-snmp-debuginfo
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug information for package php8-snmp
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-snmp-debuginfo-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package php8-snmp.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: bf61963664026f38f747127df0c1c193c69be5e06d2ea691e0e856a70a223922
name: php8-soap
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: SOAP/WSDL extension module for PHP
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/PHP
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-soap-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This module provides SOAP support.

  SOAP extension can be used to write SOAP Servers and Clients. It
  supports subsets of SOAP 1.1, SOAP 1.2 and WSDL 1.1 specifications.


pkgId: eba798d4daddeed2d162c84bf60492bb75fb4fefe45b685271aa08e9510bd1b8
name: php8-soap-debuginfo
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug information for package php8-soap
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-soap-debuginfo-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package php8-soap.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 96f540c0ffddaa731714777f95c83b958b241f049e74a1059ec91de4b2ce7a59
name: php8-sockets
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Berkeley sockets API for PHP
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/PHP
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-sockets-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  The socket extension implements a low-level interface to the socket
  communication functions based on the BSD sockets API, providing the
  possibility to act as a socket server as well as a client.


pkgId: fc76b54cf973f45be7cb8322d77709233abc5aa9a6b5d215a107f545cd2b9e83
name: php8-sockets-debuginfo
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug information for package php8-sockets
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-sockets-debuginfo-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package php8-sockets.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 262fc7f9808c77994b558177e2d5a0006295b0b7e029dc1a335a3f00682206a2
name: php8-sodium
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Cryptographic Extension Based on Libsodium
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/PHP
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-sodium-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  PHP binding to libsodium software library for encryption, decryption,
  signatures, password hashing and more.


pkgId: 0d87421dea7517b0f84f5f1c34568961392b2cdaca345cf4e9af8ddaf1651667
name: php8-sodium-debuginfo
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug information for package php8-sodium
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-sodium-debuginfo-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package php8-sodium.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: c30278877116e15694525d50157c6c7baf2c203f223d3b61cd65b68c35dc4d3a
name: php8-sqlite
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: SQLite database client for PHP
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/PHP
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-sqlite-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This is an extension for the SQLite Embeddable SQL Database Engine.
  https://www.sqlite.org

  SQLite is a C library that implements an embeddable SQL database
  engine. Programs that link with the SQLite library can have SQL
  database access without running a separate RDBMS process.

  SQLite is not a client library used to connect to a big database
  server. SQLite is the server. The SQLite library reads and writes
  directly to and from the database files on disk.

  This package includes sqlite and pdo_sqlite modules for sqlite version
  2 and 3 respectively.


pkgId: d2b5efa8a4ef8f868247d5e17a05a619373a53ab1ba9331006a16e3f23b513e6
name: php8-sqlite-debuginfo
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug information for package php8-sqlite
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-sqlite-debuginfo-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package php8-sqlite.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: b3a5c121d1530beab02b20728c359ef510591b7e4ffbbe2ab01b75c6d5280be0
name: php8-sysvmsg-debuginfo
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug information for package php8-sysvmsg
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-sysvmsg-debuginfo-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package php8-sysvmsg.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: f41c9cc4211775165291543d9157aeede6effccbf3f0b61f3daed6908d41e720
name: php8-sysvsem-debuginfo
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug information for package php8-sysvsem
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-sysvsem-debuginfo-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package php8-sysvsem.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 20729f5573ee8677c35667c119c163a912131bd9d32f1d77b48d4180922b1e63
name: php8-sysvshm-debuginfo
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug information for package php8-sysvshm
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-sysvshm-debuginfo-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package php8-sysvshm.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 879c9d717eaf0f72b43ee07e1bb8fd26b27d59436ac296a9f52fe8e394754196
name: php8-tidy
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: PHP binding for the Tidy HTML cleaner
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/PHP
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-tidy-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  Tidy is an extension based on Libtidy (http://tidy.sourceforge.net) and allows
  a PHP developer to clean, repair, and traverse HTML, XHTML, and XML
  documents -- including ones with embedded scripting languages such as
  PHP or ASP within them using OO constructs.


pkgId: ad6ca6a6a44b04c5d6a3b4e919d891001c2cae4487e3e64679612c81d0ee3636
name: php8-tidy-debuginfo
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug information for package php8-tidy
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-tidy-debuginfo-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package php8-tidy.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: ef28a092ded0bddf0391061f06b8619dec24a5c3dfdea5c481d4bef6a649a822
name: php8-tokenizer
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Extension module to access Zend Engine's PHP tokenizer
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/PHP
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-tokenizer-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  The tokenizer functions provide an interface to the PHP tokenizer
  embedded in the Zend Engine. Using these functions you may write your
  own PHP source analyzing or modification tools without having to deal
  with the language specification at the lexical level.


pkgId: 875988310a59388625db9a2b4c75ab3655fa869951628bdb795112a5813fd5fd
name: php8-tokenizer-debuginfo
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug information for package php8-tokenizer
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-tokenizer-debuginfo-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package php8-tokenizer.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: f244e8a6bd33f9671ce6119b4d52ee69390418fa28f518697d407fd2d739fc28
name: php8-xmlreader
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Streaming XML reader extension for PHP
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/PHP
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-xmlreader-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  The XMLReader extension is an XML Pull parser. The reader acts as a
  cursor going forward on the document stream and stopping at each node
  on the way.


pkgId: cc6b4d94097b63e5d1c8c1bdd2f69e2e646490823eaf8864b0740c770a7c41bc
name: php8-xmlreader-debuginfo
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug information for package php8-xmlreader
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-xmlreader-debuginfo-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package php8-xmlreader.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 3a3552dd7c02ea1b32a697b926ca7e0a315006d24628aa604877174c5715dc47
name: php8-xmlwriter
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Streaming-based XML writer extension for PHP
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/PHP
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-xmlwriter-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  XMLWriter wraps the libxml xmlWriter API. Represents a writer that
  provides a non-cached, forward-only means of generating streams or
  files containing XML data.


pkgId: d690d70bcc003ac2257666dbc63d356eb961839ac1689020d24f2fff71148454
name: php8-xmlwriter-debuginfo
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug information for package php8-xmlwriter
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-xmlwriter-debuginfo-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package php8-xmlwriter.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: dc6e3940ba95b94e252cfebaed8f105b8b5ccc74550dcd5cbba16ca9b8716a29
name: php8-xsl
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: PHP Extension Module
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/PHP
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-xsl-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  PHP's XSL extension implements the XSL (Extensible Stylesheet
  Language) standard, performing XSLT transformations using the libxslt
  library


pkgId: ccf6687daf2be5d8027c824bd0c451d33436fc7913e38249ceafb5c378298b65
name: php8-xsl-debuginfo
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug information for package php8-xsl
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-xsl-debuginfo-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package php8-xsl.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 063660f258e34e0c7389acbd3876b3099c022ff495b3cd623d1932da6ab726f9
name: php8-zip
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: ZIP archive support for PHP
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/PHP
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-zip-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This extension allows to transparently read or write ZIP compressed
  archives and the files inside them.


pkgId: c4e4268b72689bf9f1af6cacc7ffc1fae39ade4aa9e588ad17c5df0db8f1bb05
name: php8-zip-debuginfo
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug information for package php8-zip
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-zip-debuginfo-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package php8-zip.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 9008881ea55726f7ef46a9dc644f815bd81058246c6db8af2332fdfd4b5f7fd5
name: php8-zlib
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Zlib compression support for PHP
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/PHP
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-zlib-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This module enables to transparently read and write gzip (.gz)
  compressed files, through versions of most of the filesystem
  functions which work with gzip-compressed files (and uncompressed
  files, too, but not with sockets).


pkgId: d161950e1a7db6e84b40969a042e4cf813733b3343c4af60a57e7c176f02d246
name: php8-zlib-debuginfo
arch: x86_64
version: 8.3.9
epoch: 0
release: 1.1
summary: Debug information for package php8-zlib
url: https://secure.php.net
rpm_license: MIT AND PHP-3.01
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: php8-8.3.9-1.1.src.rpm
location_href: php8/php8-zlib-debuginfo-8.3.9-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package php8-zlib.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 83bec06b577c72c36cec76d1c6de81948caa08ab87b6f603c6415e9355cfbfc5
name: pigz-debuginfo
arch: x86_64
version: 2.8
epoch: 0
release: 1.1
summary: Debug information for package pigz
url: https://www.zlib.net/pigz/
rpm_license: Zlib
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: pigz-2.8-1.1.src.rpm
location_href: pigz/pigz-debuginfo-2.8-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package pigz.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: b9cc328ac1fb142a16c80e7f9b696a3b264e06434117d10b393aa5ac744c4402
name: pigz-debugsource
arch: x86_64
version: 2.8
epoch: 0
release: 1.1
summary: Debug sources for package pigz
url: https://www.zlib.net/pigz/
rpm_license: Zlib
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: pigz-2.8-1.1.src.rpm
location_href: pigz/pigz-debugsource-2.8-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package pigz.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: 72fd14be8d5639bff1d17e9780fec4498ff097c896bbd7a750f54f8da552d1ee
name: pimcommon-debuginfo
arch: x86_64
version: 24.05.2
epoch: 0
release: 1.1
summary: Debug information for package pimcommon
url: https://www.kde.org
rpm_license: GPL-2.0-only AND LGPL-2.1-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: pimcommon-24.05.2-1.1.src.rpm
location_href: pimcommon/pimcommon-debuginfo-24.05.2-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package pimcommon.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 7e5798d11b6b099c9043a4f0678814c7632ac9b52210ac39b6a279b9f80c6076
name: pimcommon-debugsource
arch: x86_64
version: 24.05.2
epoch: 0
release: 1.1
summary: Debug sources for package pimcommon
url: https://www.kde.org
rpm_license: GPL-2.0-only AND LGPL-2.1-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: pimcommon-24.05.2-1.1.src.rpm
location_href: pimcommon/pimcommon-debugsource-24.05.2-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package pimcommon.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: 292abca5a945e308c25dcc7502208c12593dd46811ce76a0120d3dd45f73376f
name: pimcommon-devel-debuginfo
arch: x86_64
version: 24.05.2
epoch: 0
release: 1.1
summary: Debug information for package pimcommon-devel
url: https://www.kde.org
rpm_license: LGPL-2.1-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: pimcommon-24.05.2-1.1.src.rpm
location_href: pimcommon/pimcommon-devel-debuginfo-24.05.2-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package pimcommon-devel.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 1407cd26947728472e0b0e2a422c82e940c65d46145a8b68cfd0f834d9934983
name: pinentry
arch: src
version: 1.3.1
epoch: 0
release: 1.1
summary: Collection of Simple PIN or Passphrase Entry Dialogs
url: https://www.gnupg.org/aegypten/
rpm_license: GPL-2.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Productivity/Other
rpm_buildhost: reproducible
location_href: pinentry/pinentry-1.3.1-1.1.src.rpm
checksum_type: sha256
description:
  This is a collection of simple PIN or passphrase entry dialogs which
  utilize the Assuan protocol as described by the Aegypten project.


pkgId: 99f7cf29b4ab55cac060dd3fe499d0eadd573598417df4dd7454b6212bceecee
name: pinentry-debuginfo
arch: x86_64
version: 1.3.1
epoch: 0
release: 1.1
summary: Debug information for package pinentry
url: https://www.gnupg.org/aegypten/
rpm_license: GPL-2.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: pinentry-1.3.1-1.1.src.rpm
location_href: pinentry/pinentry-debuginfo-1.3.1-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package pinentry.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 67890cd54b29486f20f60c1c7b34dd5bf5df18a36e504bdd5e26032c3079c196
name: pinentry-debugsource
arch: x86_64
version: 1.3.1
epoch: 0
release: 1.1
summary: Debug sources for package pinentry
url: https://www.gnupg.org/aegypten/
rpm_license: GPL-2.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: pinentry-1.3.1-1.1.src.rpm
location_href: pinentry/pinentry-debugsource-1.3.1-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package pinentry.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: d06a727bc3547561e60a59e5a02ced74f052b2cd9251ce8bc2e61d658c8e164b
name: pinentry-emacs
arch: x86_64
version: 1.3.1
epoch: 0
release: 1.1
summary: Simple PIN or Passphrase Entry Dialog integrated into Emacs
url: https://www.gnupg.org/aegypten/
rpm_license: GPL-2.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Productivity/Other
rpm_buildhost: reproducible
rpm_sourcerpm: pinentry-gui-1.3.1-1.1.src.rpm
location_href: pinentry:gui/pinentry-emacs-1.3.1-1.1.x86_64.rpm
checksum_type: sha256
description:
  A simple PIN or passphrase entry dialog utilize the Assuan protocol
  as described by the Aegypten project, integrated into Emacs.


pkgId: fb34db10d066f05b0647a67cec85d5b90591df5450afac4b5f1a2131fa1376a8
name: pinentry-emacs-debuginfo
arch: x86_64
version: 1.3.1
epoch: 0
release: 1.1
summary: Debug information for package pinentry-emacs
url: https://www.gnupg.org/aegypten/
rpm_license: GPL-2.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: pinentry-gui-1.3.1-1.1.src.rpm
location_href: pinentry:gui/pinentry-emacs-debuginfo-1.3.1-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package pinentry-emacs.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: b37258dee66597d299d1ef0a93f52b4f1dcac6cb672caddc5ed4d98ec4b47976
name: pinentry-fltk
arch: x86_64
version: 1.3.1
epoch: 0
release: 1.1
summary: Collection of Simple PIN or Passphrase Entry Dialogs
url: https://www.gnupg.org/aegypten/
rpm_license: GPL-2.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Productivity/Other
rpm_buildhost: reproducible
rpm_sourcerpm: pinentry-gui-1.3.1-1.1.src.rpm
location_href: pinentry:gui/pinentry-fltk-1.3.1-1.1.x86_64.rpm
checksum_type: sha256
description:
  A simple PIN or passphrase entry dialog utilize the Assuan protocol
  as described by the Aegypten project, using FLTK libraries.


pkgId: 9a4fc6a4830c2f2c30e1453d5295cd5764ed1149c478adeef2ed24ac2908a21e
name: pinentry-fltk-debuginfo
arch: x86_64
version: 1.3.1
epoch: 0
release: 1.1
summary: Debug information for package pinentry-fltk
url: https://www.gnupg.org/aegypten/
rpm_license: GPL-2.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: pinentry-gui-1.3.1-1.1.src.rpm
location_href: pinentry:gui/pinentry-fltk-debuginfo-1.3.1-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package pinentry-fltk.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 4c830a2b9bc8996af8a3997b26cc45bb06bafd1a050528e833cb5781caf8a1f8
name: pinentry-gnome3
arch: x86_64
version: 1.3.1
epoch: 0
release: 1.1
summary: Simple PIN or Passphrase Entry Dialog for GNOME
url: https://www.gnupg.org/aegypten/
rpm_license: GPL-2.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Productivity/Other
rpm_buildhost: reproducible
rpm_sourcerpm: pinentry-gui-1.3.1-1.1.src.rpm
location_href: pinentry:gui/pinentry-gnome3-1.3.1-1.1.x86_64.rpm
checksum_type: sha256
description:
  A simple PIN or passphrase entry dialog utilize the Assuan protocol
  as described by the Aegypten project, using GNOME libraries.


pkgId: c5274045e2c401a58cee7c369d1c5994aaf092a8ba2d9b503bdd63fcffc516b9
name: pinentry-gnome3-debuginfo
arch: x86_64
version: 1.3.1
epoch: 0
release: 1.1
summary: Debug information for package pinentry-gnome3
url: https://www.gnupg.org/aegypten/
rpm_license: GPL-2.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: pinentry-gui-1.3.1-1.1.src.rpm
location_href: pinentry:gui/pinentry-gnome3-debuginfo-1.3.1-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package pinentry-gnome3.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 831f5417948d91ad64d998c739316112ea9e9a3a04b049dca956baf8efd0cd2b
name: pinentry-gtk2
arch: x86_64
version: 1.3.1
epoch: 0
release: 1.1
summary: Simple PIN or Passphrase Entry Dialog for GTK2
url: https://www.gnupg.org/aegypten/
rpm_license: GPL-2.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Productivity/Other
rpm_buildhost: reproducible
rpm_sourcerpm: pinentry-gui-1.3.1-1.1.src.rpm
location_href: pinentry:gui/pinentry-gtk2-1.3.1-1.1.x86_64.rpm
checksum_type: sha256
description:
  A simple PIN or passphrase entry dialog utilize the Assuan protocol
  as described by the Aegypten project, using the GTK2 UI toolkit.


pkgId: 0732a0c0049f9a883b8cdfcc61efa265401f6d81027fce254b067115d668f63c
name: pinentry-gtk2-debuginfo
arch: x86_64
version: 1.3.1
epoch: 0
release: 1.1
summary: Debug information for package pinentry-gtk2
url: https://www.gnupg.org/aegypten/
rpm_license: GPL-2.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: pinentry-gui-1.3.1-1.1.src.rpm
location_href: pinentry:gui/pinentry-gtk2-debuginfo-1.3.1-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package pinentry-gtk2.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 3ec74a25abdf629890f0428d2cad67f1ad6a78230b0a5d1fc0070d1f75b18605
name: pinentry-gui-debuginfo
arch: x86_64
version: 1.3.1
epoch: 0
release: 1.1
summary: Debug information for package pinentry-gui
url: https://www.gnupg.org/aegypten/
rpm_license: GPL-2.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: pinentry-gui-1.3.1-1.1.src.rpm
location_href: pinentry:gui/pinentry-gui-debuginfo-1.3.1-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package pinentry-gui.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: b38fa4095cd75b1103209078d13ccb3f20b88798f6ddce0f81f53fbd6efd4923
name: pinentry-gui-debugsource
arch: x86_64
version: 1.3.1
epoch: 0
release: 1.1
summary: Debug sources for package pinentry-gui
url: https://www.gnupg.org/aegypten/
rpm_license: GPL-2.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: pinentry-gui-1.3.1-1.1.src.rpm
location_href: pinentry:gui/pinentry-gui-debugsource-1.3.1-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package pinentry-gui.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: 9e1a53af2d551dd29500f0c799bc940e82adfa2605eeeaec456404bbe97fb65a
name: pinentry-qt6
arch: x86_64
version: 1.3.1
epoch: 0
release: 1.1
summary: Simple PIN or Passphrase Entry Dialog for QT5
url: https://www.gnupg.org/aegypten/
rpm_license: GPL-2.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Productivity/Other
rpm_buildhost: reproducible
rpm_sourcerpm: pinentry-gui-1.3.1-1.1.src.rpm
location_href: pinentry:gui/pinentry-qt6-1.3.1-1.1.x86_64.rpm
checksum_type: sha256
description:
  A simple PIN or passphrase entry dialog utilize the Assuan protocol
  as described by the Aegypten project, using the QT5 UI toolkit.


pkgId: 1cc47756c07013941c923405a7b436391cdca201f28a9dc017b2ec0584415c33
name: pinentry-qt6-debuginfo
arch: x86_64
version: 1.3.1
epoch: 0
release: 1.1
summary: Debug information for package pinentry-qt6
url: https://www.gnupg.org/aegypten/
rpm_license: GPL-2.0-or-later
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: pinentry-gui-1.3.1-1.1.src.rpm
location_href: pinentry:gui/pinentry-qt6-debuginfo-1.3.1-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package pinentry-qt6.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 98f9a87be34a79c6b3bea48f41688e3697669871e87b42d91a94959357687c37
name: pipewire
arch: src
version: 1.2.1
epoch: 0
release: 1.1
summary: A Multimedia Framework designed to be an audio and video server and more
url: https://pipewire.org/
rpm_license: MIT
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/C and C++
rpm_buildhost: reproducible
location_href: pipewire/pipewire-1.2.1-1.1.src.rpm
checksum_type: sha256
description:
  PipeWire is a server and user space API to deal with multimedia pipelines.

  Some of its features include:

   * Capture and playback of audio and video with minimal latency;
   * Real-time Multimedia processing on audio and video;
   * Multiprocess architecture to let applications share multimedia content;
   * GStreamer plugins for easy use and integration in current applications;
   * Sandboxed applications support.


pkgId: 4a9aa1af8a677fa94275a599cbac74f87c7f780f2d059a55a8c5d6d1807840dc
name: pipewire-alsa-debuginfo
arch: x86_64
version: 1.2.1
epoch: 0
release: 1.1
summary: Debug information for package pipewire-alsa
url: https://pipewire.org/
rpm_license: MIT
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: pipewire-1.2.1-1.1.src.rpm
location_href: pipewire/pipewire-alsa-debuginfo-1.2.1-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package pipewire-alsa.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: f7de85d68f3c82a931a53b4718cc610d969b0cd1eb20a87a5f3e55e21c43ce62
name: pipewire-debuginfo
arch: x86_64
version: 1.2.1
epoch: 0
release: 1.1
summary: Debug information for package pipewire
url: https://pipewire.org/
rpm_license: MIT
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: pipewire-1.2.1-1.1.src.rpm
location_href: pipewire/pipewire-debuginfo-1.2.1-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package pipewire.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: a9f828bc0a95e9f704fe69575ef6bfadca36c2ac35852d96c943f5399d8af707
name: pipewire-debugsource
arch: x86_64
version: 1.2.1
epoch: 0
release: 1.1
summary: Debug sources for package pipewire
url: https://pipewire.org/
rpm_license: MIT
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: pipewire-1.2.1-1.1.src.rpm
location_href: pipewire/pipewire-debugsource-1.2.1-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug sources for package pipewire.
  Debug sources are useful when developing applications that use this
  package or when debugging this package.


pkgId: 0088cdc9d55cd8c8064078c1aa7d064cb22292d84dcdce0afc73d9a64b8ab6e1
name: pipewire-devel
arch: x86_64
version: 1.2.1
epoch: 0
release: 1.1
summary: Development Files For PipeWire, A Multimedia Framework
url: https://pipewire.org/
rpm_license: MIT
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/C and C++
rpm_buildhost: reproducible
rpm_sourcerpm: pipewire-1.2.1-1.1.src.rpm
location_href: pipewire/pipewire-devel-1.2.1-1.1.x86_64.rpm
checksum_type: sha256
description:
  PipeWire is a server and user space API to deal with multimedia pipelines.

  This package provides all the necessary files for development with PipeWire


pkgId: 8e03a2ced8bd157edede1b3d0bb8454ac0a579800f8b764d13506f05fc9b0547
name: pipewire-jack
arch: x86_64
version: 1.2.1
epoch: 0
release: 1.1
summary: PipeWire JACK implementation
url: https://pipewire.org/
rpm_license: MIT
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/C and C++
rpm_buildhost: reproducible
rpm_sourcerpm: pipewire-1.2.1-1.1.src.rpm
location_href: pipewire/pipewire-jack-1.2.1-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides an ld.so.conf file that makes all JACK clients
  use the JACK implementation based on PipeWire instead of the original
  JACK libraries.


pkgId: 937ecf1e5f8bad812554b691beceb76f7ac771a06cd473df74fcf7bb1edf6b40
name: pipewire-libjack-0_3
arch: x86_64
version: 1.2.1
epoch: 0
release: 1.1
summary: PipeWire libjack replacement libraries
url: https://pipewire.org/
rpm_license: MIT
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/C and C++
rpm_buildhost: reproducible
rpm_sourcerpm: pipewire-1.2.1-1.1.src.rpm
location_href: pipewire/pipewire-libjack-0_3-1.2.1-1.1.x86_64.rpm
checksum_type: sha256
description:
  PipeWire is a server and user space API to deal with multimedia pipelines.

  Some of its features include:

   * Capture and playback of audio and video with minimal latency;
   * Real-time Multimedia processing on audio and video;
   * Multiprocess architecture to let applications share multimedia content;
   * GStreamer plugins for easy use and integration in current applications;
   * Sandboxed applications support.

  This package provides the PipeWire replacement libraries for libjack.


pkgId: 95c841404ede577bb15fe47679e7abfe2064f146d7e9b505a75bc8b10014a72f
name: pipewire-libjack-0_3-debuginfo
arch: x86_64
version: 1.2.1
epoch: 0
release: 1.1
summary: Debug information for package pipewire-libjack-0_3
url: https://pipewire.org/
rpm_license: MIT
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Debug
rpm_buildhost: reproducible
rpm_sourcerpm: pipewire-1.2.1-1.1.src.rpm
location_href: pipewire/pipewire-libjack-0_3-debuginfo-1.2.1-1.1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package pipewire-libjack-0_3.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: b4dd01c6b3ca228146a39aae6942583b11a425c377d11f222a1ee154188c93e8
name: pipewire-libjack-0_3-devel
arch: x86_64
version: 1.2.1
epoch: 0
release: 1.1
summary: Development files for pipewire-libjack-0_3
url: https://pipewire.org/
rpm_license: MIT
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Development/Libraries/C and C++
rpm_buildhost: reproducible
rpm_sourcerpm: pipewire-1.2.1-1.1.src.rpm
location_href: pipewire/pipewire-libjack-0_3-devel-1.2.1-1.1.x86_64.rpm
checksum_type: sha256
description:
  PipeWire is a server and user space API to deal with multimedia pipelines.

  Some of its features include:

   * Capture and playback of audio and video with minimal latency;
   * Real-time Multimedia processing on audio and video;
   * Multiprocess architecture to let applications share multimedia content;
   * GStreamer plugins for easy use and integration in current applications;
   * Sandboxed applications support.

  This package provides the PipeWire replacement development files
  for libjack.


pkgId: bee416c4340a00e21df0355f3e6b2b3c5c725bf29c42c212cec47fb22b982d4c
name: pipewire-module-x11-0_3
arch: x86_64
version: 1.2.1
epoch: 0
release: 1.1
summary: X11 support For PipeWire, A Multimedia Framework
url: https://pipewire.org/
rpm_license: MIT
rpm_vendor: obs://build.opensuse.org/home:bmwiedemann
rpm_group: Productivity/Multimedia/Other
rpm_buildhost: reproducible
rpm_sourcerpm: pipewire-1.2.1-1.1.src.rpm
location_href: pipewire/pipewire-module-x11-0_3-1.2.1-1.1.x86_64.rpm
checksum_type: sha256
description:
  PipeWire is a server and user space API to deal with multimedia pipelines.

  The framework is used to build a modular daemon that can be configured to:

   * Be a low-latency audio server with features like pulseaudio and/or jack;
   * A video capture server that can manage hardware video capture devices
     and provide access to them;
   * A central hub where video can be made available for other applications
     such as the gnome-shell screencast API.

  This package contains X11 bell support for PipeWire.


