[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.0.0-2-default (geeko@buildhost) (gcc version 4.6.1 20110701 [gcc-4_6-branch revision 175746] (SUSE Linux) ) #1 SMP Fri Jul 22 08:28:15 UTC 2011 (50c05d7)
[    0.000000] Disabled fast string operations
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000d0000 - 00000000000d4000 (reserved)
[    0.000000]  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003eeb0000 (usable)
[    0.000000]  BIOS-e820: 000000003eeb0000 - 000000003eeb8000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003eeb8000 - 000000003ef00000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003ef00000 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000] DMI 2.3 present.
[    0.000000] DMI: FUJITSU SIEMENS AMILO PRO V2030/AMILO PRO V2030, BIOS 1.0G-2309-8A20 09/02/2005
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x3eeb0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back
[    0.000000]   1 base 03EF00000 mask FFFF00000 uncachable
[    0.000000]   2 base 03F000000 mask FFF000000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] PAT not supported by CPU.
[    0.000000] found SMP MP-table at [c00f64d0] f64d0
[    0.000000] initial memory mapped : 0 - 01000000
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ ffb000-1000000
[    0.000000] RAMDISK: 37658000 - 37ff0000
[    0.000000] Allocated new RAMDISK: 36cc0000 - 37657b7b
[    0.000000] Move RAMDISK from 0000000037658000 - 0000000037fefb7a to 36cc0000 - 37657b7a
[    0.000000] ACPI: RSDP 000f64a0 00014 (v00 PTLTD )
[    0.000000] ACPI: RSDT 3eeb3c10 00038 (v01 PTLTD    RSDT   06040000  LTP 00000000)
[    0.000000] ACPI: FACP 3eeb7eec 00074 (v01 VN800  FIC_LM7R 06040000 PTL_ 000F4240)
[    0.000000] ACPI: DSDT 3eeb3f15 03FD7 (v01 FIC    LM7R     06040000 MSFT 0100000E)
[    0.000000] ACPI: FACS 3eeb8fc0 00040
[    0.000000] ACPI: APIC 3eeb7f60 00050 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
[    0.000000] ACPI: APIC 3eeb7fb0 00050 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
[    0.000000] ACPI: SSDT 3eeb3d85 00190 (v01  PmRef  Cpu0Cst 00003001 INTL 20030224)
[    0.000000] ACPI: SSDT 3eeb3c48 0013D (v01  PmRef    CpuPm 00003000 INTL 20030224)
[    0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[    0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 118MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0003eeb0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0003eeb0
[    0.000000] On node 0 totalpages: 257599
[    0.000000] free_area_init_node: node 0, pgdat c09c0dc0, node_mem_map f64e0200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 238 pages used for memmap
[    0.000000]   HighMem zone: 30148 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 16 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
[    0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000d4000
[    0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
[    0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bffe0000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 12 pages/cpu @f6000000 s25792 r0 d23360 u4194304
[    0.000000] pcpu-alloc: s25792 r0 d23360 u4194304 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 255585
[    0.000000] Kernel command line: root=/dev/disk/by-id/ata-SAMSUNG_HM040HI_S07WJ10Y710009-part2 resume=/dev/disk/by-id/ata-SAMSUNG_HM040HI_S07WJ10Y710009-part1 nohz=off printk.time=y initcall_debug quiet init=/sbin/bootchartd
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 4123136 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:0003eeb0)
[    0.000000] Memory: 998092k/1030848k available (4548k kernel code, 32304k reserved, 3449k data, 468k init, 121544k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffd33000 - 0xfffff000   (2864 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc09d0000 - 0xc0a45000   ( 468 kB)
[    0.000000]       .data : 0xc067129e - 0xc09cfa40   (3449 kB)
[    0.000000]       .text : 0xc0200000 - 0xc067129e   (4548 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=f5c08000 soft=f5c0a000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1396.597 MHz processor.
[    0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 2793.19 BogoMIPS (lpj=5586388)
[    0.004014] pid_max: default: 32768 minimum: 301
[    0.004093] Security Framework initialized
[    0.004130] AppArmor: AppArmor initialized
[    0.004220] Mount-cache hash table entries: 512
[    0.004456] Initializing cgroup subsys cpuacct
[    0.004466] Initializing cgroup subsys memory
[    0.004480] Initializing cgroup subsys devices
[    0.004484] Initializing cgroup subsys freezer
[    0.004488] Initializing cgroup subsys net_cls
[    0.004491] Initializing cgroup subsys blkio
[    0.004504] Initializing cgroup subsys perf_event
[    0.004556] Disabled fast string operations
[    0.004570] mce: CPU supports 5 MCE banks
[    0.004586] CPU0: Thermal monitoring enabled (TM1)
[    0.008032] SMP alternatives: switching to UP code
[    0.017285] Freeing SMP alternatives: 32k freed
[    0.017308] ACPI: Core revision 20110413
[    0.024308] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.025428] ..TIMER: vector=0x30 apic1=0 pin1=16 apic2=-1 pin2=-1
[    0.028001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[    0.028001] ...trying to set up timer (IRQ0) through the 8259A ...
[    0.028001] ..... (found apic 0 pin 16) ...
[    0.028001] ....... failed.
[    0.028001] ...trying to set up timer as Virtual Wire IRQ...
[    0.069497] ..... works.
[    0.069500] CPU0: Intel(R) Celeron(R) M processor         1.40GHz stepping 08
[    0.072003] calling  trace_init_flags_sys_exit+0x0/0xd @ 1
[    0.072003] initcall trace_init_flags_sys_exit+0x0/0xd returned 0 after 0 usecs
[    0.072003] calling  trace_init_flags_sys_enter+0x0/0xd @ 1
[    0.072003] initcall trace_init_flags_sys_enter+0x0/0xd returned 0 after 0 usecs
[    0.072003] calling  init_hw_perf_events+0x0/0x78 @ 1
[    0.072003] Performance Events: p6 PMU driver.
[    0.072003] ... version:                0
[    0.072003] ... bit width:              32
[    0.072003] ... generic registers:      2
[    0.072003] ... value mask:             00000000ffffffff
[    0.072003] ... max period:             000000007fffffff
[    0.072003] ... fixed-purpose events:   0
[    0.072003] ... event mask:             0000000000000003
[    0.072003] initcall init_hw_perf_events+0x0/0x78 returned 0 after 0 usecs
[    0.072003] calling  register_trigger_all_cpu_backtrace+0x0/0xd @ 1
[    0.072003] initcall register_trigger_all_cpu_backtrace+0x0/0xd returned 0 after 0 usecs
[    0.072003] calling  migration_init+0x0/0x59 @ 1
[    0.072003] initcall migration_init+0x0/0x59 returned 0 after 0 usecs
[    0.072003] calling  spawn_ksoftirqd+0x0/0x3d @ 1
[    0.072003] initcall spawn_ksoftirqd+0x0/0x3d returned 0 after 0 usecs
[    0.072003] calling  init_workqueues+0x0/0x26f @ 1
[    0.072003] initcall init_workqueues+0x0/0x26f returned 0 after 0 usecs
[    0.072003] calling  jump_label_init_module+0x0/0xa @ 1
[    0.072003] initcall jump_label_init_module+0x0/0xa returned 0 after 0 usecs
[    0.072003] calling  jump_label_init+0x0/0x79 @ 1
[    0.072003] initcall jump_label_init+0x0/0x79 returned 0 after 0 usecs
[    0.072003] calling  cpu_stop_init+0x0/0x7b @ 1
[    0.072003] initcall cpu_stop_init+0x0/0x7b returned 0 after 0 usecs
[    0.072003] calling  rcu_scheduler_really_started+0x0/0xd @ 1
[    0.072003] initcall rcu_scheduler_really_started+0x0/0xd returned 0 after 0 usecs
[    0.072003] calling  relay_init+0x0/0xd @ 1
[    0.072003] initcall relay_init+0x0/0xd returned 0 after 0 usecs
[    0.072003] calling  tracer_alloc_buffers+0x0/0x127 @ 1
[    0.072003] initcall tracer_alloc_buffers+0x0/0x127 returned 0 after 0 usecs
[    0.072003] calling  init_trace_printk+0x0/0xa @ 1
[    0.072003] initcall init_trace_printk+0x0/0xa returned 0 after 0 usecs
[    0.072003] NMI watchdog enabled, takes one hw-pmu counter.
[    0.072003] Brought up 1 CPUs
[    0.072003] Total of 1 processors activated (2793.19 BogoMIPS).
[    0.072003] devtmpfs: initialized
[    0.072003] calling  init_mmap_min_addr+0x0/0xd @ 1
[    0.072003] initcall init_mmap_min_addr+0x0/0xd returned 0 after 0 usecs
[    0.072003] calling  init_cpufreq_transition_notifier_list+0x0/0x14 @ 1
[    0.072003] initcall init_cpufreq_transition_notifier_list+0x0/0x14 returned 0 after 0 usecs
[    0.072003] calling  net_ns_init+0x0/0xf7 @ 1
[    0.072003] initcall net_ns_init+0x0/0xf7 returned 0 after 0 usecs
[    0.072003] calling  e820_mark_nvs_memory+0x0/0x2b @ 1
[    0.072003] PM: Registering ACPI NVS region at 3eeb8000 (294912 bytes)
[    0.072003] initcall e820_mark_nvs_memory+0x0/0x2b returned 0 after 0 usecs
[    0.072003] calling  cpufreq_tsc+0x0/0x22 @ 1
[    0.072003] initcall cpufreq_tsc+0x0/0x22 returned 0 after 0 usecs
[    0.072003] calling  pci_reboot_init+0x0/0xd @ 1
[    0.072003] initcall pci_reboot_init+0x0/0xd returned 0 after 0 usecs
[    0.072003] calling  reboot_init+0x0/0xd @ 1
[    0.072003] initcall reboot_init+0x0/0xd returned 0 after 0 usecs
[    0.072003] calling  init_lapic_sysfs+0x0/0x17 @ 1
[    0.072003] initcall init_lapic_sysfs+0x0/0x17 returned 0 after 0 usecs
[    0.072003] calling  init_smp_flush+0x0/0x28 @ 1
[    0.072003] initcall init_smp_flush+0x0/0x28 returned 0 after 0 usecs
[    0.072003] calling  alloc_frozen_cpus+0x0/0x10 @ 1
[    0.072003] initcall alloc_frozen_cpus+0x0/0x10 returned 0 after 0 usecs
[    0.072003] calling  sysctl_init+0x0/0x25 @ 1
[    0.072003] initcall sysctl_init+0x0/0x25 returned 0 after 0 usecs
[    0.072003] calling  ksysfs_init+0x0/0x70 @ 1
[    0.072003] initcall ksysfs_init+0x0/0x70 returned 0 after 0 usecs
[    0.072003] calling  init_jiffies_clocksource+0x0/0xa @ 1
[    0.072003] initcall init_jiffies_clocksource+0x0/0xa returned 0 after 0 usecs
[    0.072003] calling  pm_init+0x0/0x61 @ 1
[    0.072003] initcall pm_init+0x0/0x61 returned 0 after 0 usecs
[    0.072003] calling  pm_disk_init+0x0/0xf @ 1
[    0.072003] initcall pm_disk_init+0x0/0xf returned 0 after 0 usecs
[    0.072003] calling  swsusp_header_init+0x0/0x30 @ 1
[    0.072003] initcall swsusp_header_init+0x0/0x30 returned 0 after 0 usecs
[    0.072003] calling  init_zero_pfn+0x0/0x10 @ 1
[    0.072003] initcall init_zero_pfn+0x0/0x10 returned 0 after 0 usecs
[    0.072003] calling  fsnotify_init+0x0/0x1f @ 1
[    0.072003] initcall fsnotify_init+0x0/0x1f returned 0 after 0 usecs
[    0.072003] calling  filelock_init+0x0/0x2e @ 1
[    0.072003] initcall filelock_init+0x0/0x2e returned 0 after 0 usecs
[    0.072003] calling  init_script_binfmt+0x0/0xc @ 1
[    0.072003] initcall init_script_binfmt+0x0/0xc returned 0 after 0 usecs
[    0.072003] calling  init_elf_binfmt+0x0/0xc @ 1
[    0.072003] initcall init_elf_binfmt+0x0/0xc returned 0 after 0 usecs
[    0.072003] calling  debugfs_init+0x0/0x46 @ 1
[    0.072003] initcall debugfs_init+0x0/0x46 returned 0 after 0 usecs
[    0.072003] calling  securityfs_init+0x0/0x3d @ 1
[    0.072003] initcall securityfs_init+0x0/0x3d returned 0 after 0 usecs
[    0.072003] calling  random32_init+0x0/0x9d @ 1
[    0.072003] initcall random32_init+0x0/0x9d returned 0 after 0 usecs
[    0.072003] calling  sfi_sysfs_init+0x0/0xb6 @ 1
[    0.072003] initcall sfi_sysfs_init+0x0/0xb6 returned 0 after 0 usecs
[    0.072003] calling  regulator_init+0x0/0x5b @ 1
[    0.072003] print_constraints: dummy: 
[    0.072003] initcall regulator_init+0x0/0x5b returned 0 after 0 usecs
[    0.072003] calling  early_resume_init+0x0/0x10 @ 1
[    0.072003] Time:  6:54:54  Date: 08/21/11
[    0.072003] initcall early_resume_init+0x0/0x10 returned 0 after 0 usecs
[    0.072003] calling  cpufreq_core_init+0x0/0x7a @ 1
[    0.072003] initcall cpufreq_core_init+0x0/0x7a returned 0 after 0 usecs
[    0.072003] calling  cpuidle_init+0x0/0x2e @ 1
[    0.072003] initcall cpuidle_init+0x0/0x2e returned 0 after 0 usecs
[    0.072003] calling  sock_init+0x0/0x75 @ 1
[    0.072003] initcall sock_init+0x0/0x75 returned 0 after 0 usecs
[    0.072003] calling  net_inuse_init+0x0/0x1f @ 1
[    0.072003] initcall net_inuse_init+0x0/0x1f returned 0 after 0 usecs
[    0.072003] calling  netpoll_init+0x0/0x2b @ 1
[    0.072003] initcall netpoll_init+0x0/0x2b returned 0 after 0 usecs
[    0.072003] calling  netlink_proto_init+0x0/0x1c @ 1
[    0.072003] NET: Registered protocol family 16
[    0.072003] initcall netlink_proto_init+0x0/0x1c returned 0 after 0 usecs
[    0.072003] calling  olpc_init+0x0/0x1a @ 1
[    0.072003] initcall olpc_init+0x0/0x1a returned 0 after 0 usecs
[    0.072003] calling  bdi_class_init+0x0/0x38 @ 1
[    0.072003] initcall bdi_class_init+0x0/0x38 returned 0 after 0 usecs
[    0.072003] calling  kobject_uevent_init+0x0/0x19 @ 1
[    0.072003] initcall kobject_uevent_init+0x0/0x19 returned 0 after 0 usecs
[    0.072003] calling  gpiolib_sysfs_init+0x0/0x70 @ 1
[    0.072003] initcall gpiolib_sysfs_init+0x0/0x70 returned 0 after 0 usecs
[    0.072003] calling  pcibus_class_init+0x0/0xf @ 1
[    0.072003] initcall pcibus_class_init+0x0/0xf returned 0 after 0 usecs
[    0.072003] calling  pci_driver_init+0x0/0xa @ 1
[    0.072003] initcall pci_driver_init+0x0/0xa returned 0 after 0 usecs
[    0.072003] calling  rio_bus_init+0x0/0x26 @ 1
[    0.072003] initcall rio_bus_init+0x0/0x26 returned 0 after 0 usecs
[    0.072003] calling  backlight_class_init+0x0/0x52 @ 1
[    0.072003] initcall backlight_class_init+0x0/0x52 returned 0 after 0 usecs
[    0.072003] calling  tty_class_init+0x0/0x27 @ 1
[    0.072003] initcall tty_class_init+0x0/0x27 returned 0 after 0 usecs
[    0.072003] calling  vtconsole_class_init+0x0/0xc5 @ 1
[    0.072003] initcall vtconsole_class_init+0x0/0xc5 returned 0 after 0 usecs
[    0.072003] calling  wakeup_sources_debugfs_init+0x0/0x2e @ 1
[    0.072003] initcall wakeup_sources_debugfs_init+0x0/0x2e returned 0 after 0 usecs
[    0.072003] calling  spi_init+0x0/0x6f @ 1
[    0.072003] initcall spi_init+0x0/0x6f returned 0 after 0 usecs
[    0.072003] calling  amd_postcore_init+0x0/0x70 @ 1
[    0.072003] initcall amd_postcore_init+0x0/0x70 returned 0 after 0 usecs
[    0.072003] calling  arch_kdebugfs_init+0x0/0x1a @ 1
[    0.072003] initcall arch_kdebugfs_init+0x0/0x1a returned 0 after 0 usecs
[    0.072003] calling  init_pit_clocksource+0x0/0x2b @ 1
[    0.072003] initcall init_pit_clocksource+0x0/0x2b returned 0 after 0 usecs
[    0.072003] calling  configure_trampolines+0x0/0x1b @ 1
[    0.072003] initcall configure_trampolines+0x0/0x1b returned 0 after 0 usecs
[    0.072003] calling  mtrr_if_init+0x0/0x55 @ 1
[    0.072003] initcall mtrr_if_init+0x0/0x55 returned 0 after 0 usecs
[    0.072003] calling  ffh_cstate_init+0x0/0x23 @ 1
[    0.072003] initcall ffh_cstate_init+0x0/0x23 returned 0 after 0 usecs
[    0.072003] calling  kdump_buf_page_init+0x0/0x36 @ 1
[    0.072003] initcall kdump_buf_page_init+0x0/0x36 returned 0 after 0 usecs
[    0.072003] calling  dynamic_debug_init+0x0/0xf5 @ 1
[    0.072003] initcall dynamic_debug_init+0x0/0xf5 returned 0 after 0 usecs
[    0.072003] calling  acpi_pci_init+0x0/0x56 @ 1
[    0.072003] ACPI: bus type pci registered
[    0.072003] initcall acpi_pci_init+0x0/0x56 returned 0 after 0 usecs
[    0.072003] calling  dma_bus_init+0x0/0x2d @ 1
[    0.072003] initcall dma_bus_init+0x0/0x2d returned 0 after 0 usecs
[    0.072003] calling  dma_channel_table_init+0x0/0xdc @ 1
[    0.072003] initcall dma_channel_table_init+0x0/0xdc returned 0 after 0 usecs
[    0.072003] calling  dmi_id_init+0x0/0xa4 @ 1
[    0.072003] initcall dmi_id_init+0x0/0xa4 returned 0 after 0 usecs
[    0.072003] calling  init_cyclone_clocksource+0x0/0x14 @ 1
[    0.072003] initcall init_cyclone_clocksource+0x0/0x14 returned -19 after 0 usecs
[    0.072003] calling  pci_arch_init+0x0/0x5f @ 1
[    0.072040] PCI: PCI BIOS revision 2.10 entry at 0xfd8ec, last bus=1
[    0.072043] PCI: Using configuration type 1 for base access
[    0.072070] initcall pci_arch_init+0x0/0x5f returned 0 after 3906 usecs
[    0.072075] calling  topology_init+0x0/0x32 @ 1
[    0.072090] initcall topology_init+0x0/0x32 returned 0 after 0 usecs
[    0.072094] calling  mtrr_init_finialize+0x0/0x2c @ 1
[    0.072100] initcall mtrr_init_finialize+0x0/0x2c returned 0 after 0 usecs
[    0.072105] calling  param_sysfs_init+0x0/0x4a @ 1
[    0.072984] initcall param_sysfs_init+0x0/0x4a returned 0 after 0 usecs
[    0.072991] calling  pm_sysrq_init+0x0/0x20 @ 1
[    0.072997] initcall pm_sysrq_init+0x0/0x20 returned 0 after 0 usecs
[    0.073001] calling  default_bdi_init+0x0/0xa5 @ 1
[    0.073155] initcall default_bdi_init+0x0/0xa5 returned 0 after 0 usecs
[    0.073161] calling  init_bio+0x0/0xf3 @ 1
[    0.073240] bio: create slab <bio-0> at 0
[    0.073252] initcall init_bio+0x0/0xf3 returned 0 after 0 usecs
[    0.073257] calling  fsnotify_notification_init+0x0/0x9b @ 1
[    0.073272] initcall fsnotify_notification_init+0x0/0x9b returned 0 after 0 usecs
[    0.073277] calling  cryptomgr_init+0x0/0xa @ 1
[    0.073282] initcall cryptomgr_init+0x0/0xa returned 0 after 0 usecs
[    0.073286] calling  blk_settings_init+0x0/0x19 @ 1
[    0.073291] initcall blk_settings_init+0x0/0x19 returned 0 after 0 usecs
[    0.073295] calling  blk_ioc_init+0x0/0x2e @ 1
[    0.073303] initcall blk_ioc_init+0x0/0x2e returned 0 after 0 usecs
[    0.073307] calling  blk_softirq_init+0x0/0x50 @ 1
[    0.073313] initcall blk_softirq_init+0x0/0x50 returned 0 after 0 usecs
[    0.073317] calling  blk_iopoll_setup+0x0/0x50 @ 1
[    0.073321] initcall blk_iopoll_setup+0x0/0x50 returned 0 after 0 usecs
[    0.073326] calling  genhd_device_init+0x0/0x5d @ 1
[    0.073381] initcall genhd_device_init+0x0/0x5d returned 0 after 0 usecs
[    0.073386] calling  blk_dev_integrity_init+0x0/0x2e @ 1
[    0.073394] initcall blk_dev_integrity_init+0x0/0x2e returned 0 after 0 usecs
[    0.073399] calling  gpiolib_debugfs_init+0x0/0x29 @ 1
[    0.073407] initcall gpiolib_debugfs_init+0x0/0x29 returned 0 after 0 usecs
[    0.073415] calling  pci_slot_init+0x0/0x40 @ 1
[    0.073421] initcall pci_slot_init+0x0/0x40 returned 0 after 0 usecs
[    0.073426] calling  fbmem_init+0x0/0x95 @ 1
[    0.073446] initcall fbmem_init+0x0/0x95 returned 0 after 0 usecs
[    0.073449] calling  acpi_init+0x0/0xaf @ 1
[    0.074464] ACPI: EC: Look up EC in DSDT
[    0.276333] ACPI: Interpreter enabled
[    0.276344] ACPI: (supports S0 S3 S4 S5)
[    0.276372] ACPI: Using IOAPIC for interrupt routing
[    0.282802] ACPI: Power Resource [PFAN] (off)
[    0.283036] initcall acpi_init+0x0/0xaf returned 0 after 203137 usecs
[    0.283041] calling  dock_init+0x0/0xb2 @ 1
[    0.283189] ACPI: No dock devices found.
[    0.283193] initcall dock_init+0x0/0xb2 returned 0 after 0 usecs
[    0.283197] calling  acpi_pci_root_init+0x0/0x26 @ 1
[    0.283200] HEST: Table not found.
[    0.283207] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.283317] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.283512] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.283517] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.283522] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xfff7ffff] (ignored)
[    0.283548] pci 0000:00:00.0: [1106:0314] type 0 class 0x000600
[    0.283562] pci 0000:00:00.0: reg 10: [mem 0xe0000000-0xefffffff pref]
[    0.283634] pci 0000:00:00.1: [1106:1314] type 0 class 0x000600
[    0.283684] pci 0000:00:00.2: [1106:2314] type 0 class 0x000600
[    0.283733] pci 0000:00:00.3: [1106:3208] type 0 class 0x000600
[    0.283782] pci 0000:00:00.4: [1106:4314] type 0 class 0x000600
[    0.283833] pci 0000:00:00.7: [1106:7314] type 0 class 0x000600
[    0.283885] pci 0000:00:01.0: [1106:b198] type 1 class 0x000604
[    0.283935] pci 0000:00:01.0: supports D1
[    0.283955] pci 0000:00:06.0: [14e4:4318] type 0 class 0x000280
[    0.283971] pci 0000:00:06.0: reg 10: [mem 0xd0000000-0xd0001fff]
[    0.284034] pci 0000:00:0c.0: [104c:8031] type 2 class 0x000607
[    0.284055] pci 0000:00:0c.0: reg 10: [mem 0x00000000-0x00000fff]
[    0.284078] pci 0000:00:0c.0: supports D1 D2
[    0.284082] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.284089] pci 0000:00:0c.0: PME# disabled
[    0.284111] pci 0000:00:0c.2: [104c:8032] type 0 class 0x000c00
[    0.284132] pci 0000:00:0c.2: reg 10: [mem 0xd0002000-0xd00027ff]
[    0.284144] pci 0000:00:0c.2: reg 14: [mem 0xd0004000-0xd0007fff]
[    0.284213] pci 0000:00:0c.2: supports D1 D2
[    0.284217] pci 0000:00:0c.2: PME# supported from D0 D1 D2 D3hot
[    0.284222] pci 0000:00:0c.2: PME# disabled
[    0.284253] pci 0000:00:0f.0: [1106:3149] type 0 class 0x000101
[    0.284274] pci 0000:00:0f.0: reg 10: [io  0x1430-0x1437]
[    0.284286] pci 0000:00:0f.0: reg 14: [io  0x1424-0x1427]
[    0.284299] pci 0000:00:0f.0: reg 18: [io  0x1428-0x142f]
[    0.284311] pci 0000:00:0f.0: reg 1c: [io  0x1420-0x1423]
[    0.284324] pci 0000:00:0f.0: reg 20: [io  0x1400-0x140f]
[    0.284336] pci 0000:00:0f.0: reg 24: [io  0x1000-0x10ff]
[    0.284386] pci 0000:00:0f.1: [1106:0571] type 0 class 0x000101
[    0.284441] pci 0000:00:0f.1: reg 20: [io  0x1410-0x141f]
[    0.284507] pci 0000:00:10.0: [1106:3038] type 0 class 0x000c03
[    0.284560] pci 0000:00:10.0: reg 20: [io  0x1440-0x145f]
[    0.284597] pci 0000:00:10.0: supports D1 D2
[    0.284601] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.284607] pci 0000:00:10.0: PME# disabled
[    0.284627] pci 0000:00:10.1: [1106:3038] type 0 class 0x000c03
[    0.284679] pci 0000:00:10.1: reg 20: [io  0x1460-0x147f]
[    0.284717] pci 0000:00:10.1: supports D1 D2
[    0.284720] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.284726] pci 0000:00:10.1: PME# disabled
[    0.284749] pci 0000:00:10.4: [1106:3104] type 0 class 0x000c03
[    0.284769] pci 0000:00:10.4: reg 10: [mem 0xd0002800-0xd00028ff]
[    0.284840] pci 0000:00:10.4: supports D1 D2
[    0.284843] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[    0.284849] pci 0000:00:10.4: PME# disabled
[    0.284873] pci 0000:00:11.0: [1106:3227] type 0 class 0x000601
[    0.284946] HPET not enabled in BIOS. You might try hpet=force boot option
[    0.284992] pci 0000:00:11.5: [1106:3059] type 0 class 0x000401
[    0.285012] pci 0000:00:11.5: reg 10: [io  0x1800-0x18ff]
[    0.285086] pci 0000:00:11.5: supports D1 D2
[    0.285107] pci 0000:00:11.6: [1106:3068] type 0 class 0x000780
[    0.285127] pci 0000:00:11.6: reg 10: [io  0x1c00-0x1cff]
[    0.285221] pci 0000:00:12.0: [1106:3065] type 0 class 0x000200
[    0.285241] pci 0000:00:12.0: reg 10: [io  0x2000-0x20ff]
[    0.285253] pci 0000:00:12.0: reg 14: [mem 0xd0002c00-0xd0002cff]
[    0.285317] pci 0000:00:12.0: supports D1 D2
[    0.285320] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.285326] pci 0000:00:12.0: PME# disabled
[    0.285392] pci 0000:01:00.0: [1106:3344] type 0 class 0x000300
[    0.285410] pci 0000:01:00.0: reg 10: [mem 0xf0000000-0xf3ffffff pref]
[    0.285421] pci 0000:01:00.0: reg 14: [mem 0xd1000000-0xd1ffffff]
[    0.285456] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[    0.285477] pci 0000:01:00.0: supports D1 D2
[    0.285517] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.285524] pci 0000:00:01.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.285530] pci 0000:00:01.0:   bridge window [mem 0xd1000000-0xd1ffffff]
[    0.285537] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf3ffffff pref]
[    0.285586] pci_bus 0000:00: on NUMA node 0
[    0.285592] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.285840]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[    0.290668] initcall acpi_pci_root_init+0x0/0x26 returned 0 after 7812 usecs
[    0.290673] calling  acpi_pci_link_init+0x0/0x36 @ 1
[    0.290743] ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *10, disabled.
[    0.290835] ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *9, disabled.
[    0.290923] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *5, disabled.
[    0.291005] ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *0, disabled.
[    0.291133] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 9 *10 11 12)
[    0.291255] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *9 10 11 12)
[    0.291370] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 9 10 11 12) *5
[    0.291465] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 9 10 11 12) *0, disabled.
[    0.291560] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 9 10 11 12) *0, disabled.
[    0.291655] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 9 10 11 12) *0, disabled.
[    0.291749] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 9 10 11 12) *0, disabled.
[    0.291875] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 9 10 11 12) *8
[    0.291918] initcall acpi_pci_link_init+0x0/0x36 returned 0 after 0 usecs
[    0.291923] calling  pnp_init+0x0/0xa @ 1
[    0.291940] initcall pnp_init+0x0/0xa returned 0 after 0 usecs
[    0.291945] calling  misc_init+0x0/0xaa @ 1
[    0.291966] initcall misc_init+0x0/0xaa returned 0 after 0 usecs
[    0.291970] calling  vga_arb_device_init+0x0/0xd0 @ 1
[    0.292017] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.292021] vgaarb: loaded
[    0.292024] vgaarb: bridge control possible 0000:01:00.0
[    0.292029] initcall vga_arb_device_init+0x0/0xd0 returned 0 after 3906 usecs
[    0.292035] calling  cn_init+0x0/0x97 @ 1
[    0.292051] initcall cn_init+0x0/0x97 returned 0 after 0 usecs
[    0.292057] calling  wm831x_spi_init+0x0/0xdb @ 1
[    0.292127] initcall wm831x_spi_init+0x0/0xdb returned 0 after 0 usecs
[    0.292131] calling  ezx_pcap_init+0x0/0xa @ 1
[    0.292147] initcall ezx_pcap_init+0x0/0xa returned 0 after 0 usecs
[    0.292151] calling  init_scsi+0x0/0x8d @ 1
[    0.292304] SCSI subsystem initialized
[    0.292309] initcall init_scsi+0x0/0x8d returned 0 after 0 usecs
[    0.292314] calling  phy_init+0x0/0x25 @ 1
[    0.292346] initcall phy_init+0x0/0x25 returned 0 after 0 usecs
[    0.292351] calling  serio_init+0x0/0x2b @ 1
[    0.292368] initcall serio_init+0x0/0x2b returned 0 after 0 usecs
[    0.292372] calling  input_init+0x0/0x2f @ 1
[    0.292390] initcall input_init+0x0/0x2f returned 0 after 0 usecs
[    0.292394] calling  rtc_init+0x0/0x5e @ 1
[    0.292407] initcall rtc_init+0x0/0x5e returned 0 after 0 usecs
[    0.292412] calling  power_supply_class_init+0x0/0x31 @ 1
[    0.292425] initcall power_supply_class_init+0x0/0x31 returned 0 after 0 usecs
[    0.292430] calling  md_init+0x0/0x14e @ 1
[    0.292509] initcall md_init+0x0/0x14e returned 0 after 0 usecs
[    0.292513] calling  leds_init+0x0/0x35 @ 1
[    0.292526] initcall leds_init+0x0/0x35 returned 0 after 0 usecs
[    0.292531] calling  pci_subsys_init+0x0/0x40 @ 1
[    0.292533] PCI: Using ACPI for IRQ routing
[    0.292539] PCI: pci_cache_line_size set to 64 bytes
[    0.292626] reserve RAM buffer: 000000000009f800 - 000000000009ffff 
[    0.292630] reserve RAM buffer: 000000003eeb0000 - 000000003fffffff 
[    0.292637] initcall pci_subsys_init+0x0/0x40 returned 0 after 0 usecs
[    0.292641] calling  proto_init+0x0/0xa @ 1
[    0.292649] initcall proto_init+0x0/0xa returned 0 after 0 usecs
[    0.292653] calling  net_dev_init+0x0/0x1c7 @ 1
[    0.292800] initcall net_dev_init+0x0/0x1c7 returned 0 after 0 usecs
[    0.292804] calling  neigh_init+0x0/0x77 @ 1
[    0.292809] initcall neigh_init+0x0/0x77 returned 0 after 0 usecs
[    0.292813] calling  fib_rules_init+0x0/0x9e @ 1
[    0.292819] initcall fib_rules_init+0x0/0x9e returned 0 after 0 usecs
[    0.292823] calling  pktsched_init+0x0/0xe0 @ 1
[    0.292832] initcall pktsched_init+0x0/0xe0 returned 0 after 0 usecs
[    0.292836] calling  tc_filter_init+0x0/0x4d @ 1
[    0.292840] initcall tc_filter_init+0x0/0x4d returned 0 after 0 usecs
[    0.292844] calling  tc_action_init+0x0/0x4d @ 1
[    0.292849] initcall tc_action_init+0x0/0x4d returned 0 after 0 usecs
[    0.292853] calling  genl_init+0x0/0x7a @ 1
[    0.292870] initcall genl_init+0x0/0x7a returned 0 after 0 usecs
[    0.292876] calling  cipso_v4_init+0x0/0x58 @ 1
[    0.292882] initcall cipso_v4_init+0x0/0x58 returned 0 after 0 usecs
[    0.292887] calling  wireless_nlevent_init+0x0/0xa @ 1
[    0.292892] initcall wireless_nlevent_init+0x0/0xa returned 0 after 0 usecs
[    0.292897] calling  netlbl_init+0x0/0x7c @ 1
[    0.292900] NetLabel: Initializing
[    0.292903] NetLabel:  domain hash size = 128
[    0.292905] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.292924] NetLabel:  unlabeled traffic allowed by default
[    0.292928] initcall netlbl_init+0x0/0x7c returned 0 after 0 usecs
[    0.292933] calling  sysctl_init+0x0/0x37 @ 1
[    0.292938] initcall sysctl_init+0x0/0x37 returned 0 after 0 usecs
[    0.292943] calling  print_ICs+0x0/0x85 @ 1
[    0.292948] initcall print_ICs+0x0/0x85 returned 0 after 0 usecs
[    0.292952] calling  hpet_late_init+0x0/0x39 @ 1
[    0.292957] initcall hpet_late_init+0x0/0x39 returned -19 after 0 usecs
[    0.292961] calling  init_amd_nbs+0x0/0x33 @ 1
[    0.292979] initcall init_amd_nbs+0x0/0x33 returned 0 after 0 usecs
[    0.292984] calling  clocksource_done_booting+0x0/0x4b @ 1
[    0.292991] initcall clocksource_done_booting+0x0/0x4b returned 0 after 0 usecs
[    0.292996] calling  rb_init_debugfs+0x0/0x2e @ 1
[    0.293010] initcall rb_init_debugfs+0x0/0x2e returned 0 after 0 usecs
[    0.293014] calling  tracer_init_debugfs+0x0/0x255 @ 1
[    0.293106] initcall tracer_init_debugfs+0x0/0x255 returned 0 after 0 usecs
[    0.293111] calling  init_trace_printk_function_export+0x0/0x32 @ 1
[    0.293117] initcall init_trace_printk_function_export+0x0/0x32 returned 0 after 0 usecs
[    0.293121] calling  event_trace_init+0x0/0x190 @ 1
[    0.296180] initcall event_trace_init+0x0/0x190 returned 0 after 3906 usecs
[    0.296188] calling  init_kprobe_trace+0x0/0x76 @ 1
[    0.296203] initcall init_kprobe_trace+0x0/0x76 returned 0 after 0 usecs
[    0.296210] calling  init_pipe_fs+0x0/0x39 @ 1
[    0.296251] initcall init_pipe_fs+0x0/0x39 returned 0 after 0 usecs
[    0.296256] calling  eventpoll_init+0x0/0xd5 @ 1
[    0.296305] initcall eventpoll_init+0x0/0xd5 returned 0 after 0 usecs
[    0.296309] calling  anon_inode_init+0x0/0x6e @ 1
[    0.296325] initcall anon_inode_init+0x0/0x6e returned 0 after 0 usecs
[    0.296332] calling  tomoyo_initerface_init+0x0/0x1d @ 1
[    0.296337] initcall tomoyo_initerface_init+0x0/0x1d returned 0 after 0 usecs
[    0.296342] calling  aa_create_aafs+0x0/0x51 @ 1
[    0.296380] AppArmor: AppArmor Filesystem Enabled
[    0.296385] initcall aa_create_aafs+0x0/0x51 returned 0 after 0 usecs
[    0.296390] calling  blk_scsi_ioctl_init+0x0/0x8 @ 1
[    0.296397] initcall blk_scsi_ioctl_init+0x0/0x8 returned 0 after 0 usecs
[    0.296402] calling  acpi_event_init+0x0/0x75 @ 1
[    0.296432] initcall acpi_event_init+0x0/0x75 returned 0 after 0 usecs
[    0.296436] calling  pnp_system_init+0x0/0xa @ 1
[    0.296469] initcall pnp_system_init+0x0/0xa returned 0 after 0 usecs
[    0.296473] calling  pnpacpi_init+0x0/0x87 @ 1
[    0.296476] pnp: PnP ACPI init
[    0.296508] ACPI: bus type pnp registered
[    0.296762] pnp 00:00: [bus 00-ff]
[    0.296768] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.296772] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.296776] pnp 00:00: [io  0x0d00-0xffff window]
[    0.296780] pnp 00:00: [mem 0x40000000-0xfff7ffff window]
[    0.296885] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.297292] pnp 00:01: [dma 4]
[    0.297295] pnp 00:01: [io  0x0000-0x000f]
[    0.297299] pnp 00:01: [io  0x0081-0x008f]
[    0.297302] pnp 00:01: [io  0x00c0-0x00df]
[    0.297350] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.297368] pnp 00:02: [io  0x0070-0x0075]
[    0.297392] pnp 00:02: [irq 8]
[    0.297439] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.297484] pnp 00:03: [io  0x00f0-0x00ff]
[    0.297492] pnp 00:03: [irq 13]
[    0.297537] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.297579] pnp 00:04: [io  0x0061]
[    0.297623] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.297655] pnp 00:05: [mem 0x00000000-0x0009ffff]
[    0.297658] pnp 00:05: [mem 0x000e0000-0x000fffff]
[    0.297662] pnp 00:05: [mem 0xfee00000-0xfee00fff]
[    0.297666] pnp 00:05: [mem 0xfff80000-0xffffffff]
[    0.297669] pnp 00:05: [mem 0xffb80000-0xffbfffff]
[    0.297763] system 00:05: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.297769] system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.297774] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.297779] system 00:05: [mem 0xfff80000-0xffffffff] could not be reserved
[    0.297783] system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved
[    0.297789] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.297937] pnp 00:06: [io  0x0061-0x0063]
[    0.297940] pnp 00:06: [io  0x0065-0x006f]
[    0.297944] pnp 00:06: [io  0x0080]
[    0.297947] pnp 00:06: [io  0x0092]
[    0.297950] pnp 00:06: [io  0x00a8-0x00a9]
[    0.297954] pnp 00:06: [io  0x04d0-0x04d1]
[    0.297957] pnp 00:06: [io  0xfe10-0xfe11]
[    0.297960] pnp 00:06: [io  0xfe00]
[    0.297964] pnp 00:06: [io  0x4000-0x407f]
[    0.297967] pnp 00:06: [io  0x4100-0x411f]
[    0.298044] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    0.298048] system 00:06: [io  0xfe10-0xfe11] has been reserved
[    0.298053] system 00:06: [io  0xfe00] has been reserved
[    0.298057] system 00:06: [io  0x4000-0x407f] has been reserved
[    0.298061] system 00:06: [io  0x4100-0x411f] has been reserved
[    0.298066] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.298101] pnp 00:07: [irq 12]
[    0.298149] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.298182] pnp 00:08: [io  0x0060]
[    0.298185] pnp 00:08: [io  0x0064]
[    0.298193] pnp 00:08: [irq 1]
[    0.298238] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.298876] pnp: PnP ACPI: found 9 devices
[    0.298879] ACPI: ACPI bus type pnp unregistered
[    0.298891] initcall pnpacpi_init+0x0/0x87 returned 0 after 0 usecs
[    0.298895] calling  pnpbios_init+0x0/0xe4 @ 1
[    0.298902] PnPBIOS: Disabled by ACPI PNP
[    0.298906] initcall pnpbios_init+0x0/0xe4 returned -19 after 0 usecs
[    0.298911] calling  chr_dev_init+0x0/0x14 @ 1
[    0.301450] initcall chr_dev_init+0x0/0x14 returned 0 after 3906 usecs
[    0.301458] calling  firmware_class_init+0x0/0xf @ 1
[    0.301474] initcall firmware_class_init+0x0/0xf returned 0 after 0 usecs
[    0.301480] calling  cpufreq_gov_performance_init+0x0/0xa @ 1
[    0.301487] initcall cpufreq_gov_performance_init+0x0/0xa returned 0 after 0 usecs
[    0.301492] calling  cpufreq_gov_dbs_init+0x0/0x55 @ 1
[    0.301498] initcall cpufreq_gov_dbs_init+0x0/0x55 returned 0 after 0 usecs
[    0.301502] calling  init_acpi_pm_clocksource+0x0/0x10e @ 1
[    0.336002] Switching to clocksource acpi_pm
[    0.336020] initcall init_acpi_pm_clocksource+0x0/0x10e returned 0 after 31260 usecs
[    0.336020] calling  pcibios_assign_resources+0x0/0x66 @ 1
[    0.336020] PCI: max bus depth: 1 pci_try_num: 2
[    0.336020] pci 0000:00:0c.0: BAR 15: assigned [mem 0x40000000-0x43ffffff pref]
[    0.336020] pci 0000:00:0c.0: BAR 16: assigned [mem 0x44000000-0x47ffffff]
[    0.336020] pci 0000:00:0c.0: BAR 0: assigned [mem 0x48000000-0x48000fff]
[    0.336020] pci 0000:00:0c.0: BAR 0: set to [mem 0x48000000-0x48000fff] (PCI address [0x48000000-0x48000fff])
[    0.336020] pci 0000:00:0c.0: BAR 13: assigned [io  0x2400-0x24ff]
[    0.336020] pci 0000:00:0c.0: BAR 14: assigned [io  0x2800-0x28ff]
[    0.336020] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x10000)
[    0.336020] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.336020] pci 0000:00:01.0:   bridge window [io  disabled]
[    0.336020] pci 0000:00:01.0:   bridge window [mem 0xd1000000-0xd1ffffff]
[    0.336020] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf3ffffff pref]
[    0.336020] pci 0000:00:0c.0: CardBus bridge to [bus 02-05]
[    0.336020] pci 0000:00:0c.0:   bridge window [io  0x2400-0x24ff]
[    0.336020] pci 0000:00:0c.0:   bridge window [io  0x2800-0x28ff]
[    0.336020] pci 0000:00:0c.0:   bridge window [mem 0x40000000-0x43ffffff pref]
[    0.336020] pci 0000:00:0c.0:   bridge window [mem 0x44000000-0x47ffffff]
[    0.336020] pci 0000:00:01.0: setting latency timer to 64
[    0.336020] pci 0000:00:0c.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.336020] pci 0000:00:0c.0: setting latency timer to 64
[    0.336020] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.336020] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[    0.336020] pci_bus 0000:01: resource 1 [mem 0xd1000000-0xd1ffffff]
[    0.336020] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf3ffffff pref]
[    0.336020] pci_bus 0000:02: resource 0 [io  0x2400-0x24ff]
[    0.336020] pci_bus 0000:02: resource 1 [io  0x2800-0x28ff]
[    0.336020] pci_bus 0000:02: resource 2 [mem 0x40000000-0x43ffffff pref]
[    0.336020] pci_bus 0000:02: resource 3 [mem 0x44000000-0x47ffffff]
[    0.336020] initcall pcibios_assign_resources+0x0/0x66 returned 0 after 259 usecs
[    0.336020] calling  sysctl_core_init+0x0/0x28 @ 1
[    0.336020] initcall sysctl_core_init+0x0/0x28 returned 0 after 26 usecs
[    0.336020] calling  inet_init+0x0/0x233 @ 1
[    0.336020] NET: Registered protocol family 2
[    0.336020] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.336020] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.336020] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.336190] TCP: Hash tables configured (established 131072 bind 65536)
[    0.336198] TCP reno registered
[    0.336211] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.336255] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.336590] initcall inet_init+0x0/0x233 returned 0 after 4109 usecs
[    0.336602] calling  af_unix_init+0x0/0x4a @ 1
[    0.336626] NET: Registered protocol family 1
[    0.336641] initcall af_unix_init+0x0/0x4a returned 0 after 31 usecs
[    0.336651] calling  pci_apply_final_quirks+0x0/0x10b @ 1
[    0.336693] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[    0.336786] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message
[    0.336807] pci 0000:01:00.0: Boot video device
[    0.336812] PCI: CLS 32 bytes, default 64
[    0.336818] initcall pci_apply_final_quirks+0x0/0x10b returned 0 after 155 usecs
[    0.336832] calling  populate_rootfs+0x0/0x65 @ 1
[    0.336947] Unpacking initramfs...
[    0.697188] Freeing initrd memory: 9824k freed
[    0.709901] initcall populate_rootfs+0x0/0x65 returned 0 after 364279 usecs
[    0.709915] calling  pci_iommu_init+0x0/0x30 @ 1
[    0.709922] initcall pci_iommu_init+0x0/0x30 returned 0 after 2 usecs
[    0.709926] calling  i8259A_init_ops+0x0/0x19 @ 1
[    0.709934] initcall i8259A_init_ops+0x0/0x19 returned 0 after 2 usecs
[    0.709938] calling  sbf_init+0x0/0xc0 @ 1
[    0.709943] initcall sbf_init+0x0/0xc0 returned 0 after 1 usecs
[    0.709948] calling  init_tsc_clocksource+0x0/0x54 @ 1
[    0.709988] initcall init_tsc_clocksource+0x0/0x54 returned 0 after 34 usecs
[    0.709993] calling  add_rtc_cmos+0x0/0x81 @ 1
[    0.710006] initcall add_rtc_cmos+0x0/0x81 returned 0 after 7 usecs
[    0.710010] calling  i8237A_init_ops+0x0/0xd @ 1
[    0.710016] initcall i8237A_init_ops+0x0/0xd returned 0 after 1 usecs
[    0.710030] calling  cache_sysfs_init+0x0/0x55 @ 1
[    0.710036] initcall cache_sysfs_init+0x0/0x55 returned 0 after 1 usecs
[    0.710041] calling  mcheck_init_device+0x0/0x19 @ 1
[    0.710301] initcall mcheck_init_device+0x0/0x19 returned 0 after 239 usecs
[    0.710308] calling  threshold_init_device+0x0/0x44 @ 1
[    0.710315] initcall threshold_init_device+0x0/0x44 returned 0 after 1 usecs
[    0.710320] calling  thermal_throttle_init_device+0x0/0x7d @ 1
[    0.710332] initcall thermal_throttle_init_device+0x0/0x7d returned 0 after 6 usecs
[    0.710339] calling  msr_init+0x0/0x103 @ 1
[    0.710467] initcall msr_init+0x0/0x103 returned 0 after 115 usecs
[    0.710473] calling  ioapic_init_ops+0x0/0xd @ 1
[    0.710479] initcall ioapic_init_ops+0x0/0xd returned 0 after 1 usecs
[    0.710485] calling  add_pcspkr+0x0/0x42 @ 1
[    0.710531] initcall add_pcspkr+0x0/0x42 returned 0 after 39 usecs
[    0.710541] calling  start_periodic_check_for_corruption+0x0/0x50 @ 1
[    0.710547] initcall start_periodic_check_for_corruption+0x0/0x50 returned 0 after 1 usecs
[    0.710552] calling  add_bus_probe+0x0/0x1a @ 1
[    0.710558] initcall add_bus_probe+0x0/0x1a returned 0 after 1 usecs
[    0.710565] calling  olpc_create_platform_devices+0x0/0x1a @ 1
[    0.710572] initcall olpc_create_platform_devices+0x0/0x1a returned 0 after 1 usecs
[    0.710577] calling  init_sched_debug_procfs+0x0/0x30 @ 1
[    0.710599] initcall init_sched_debug_procfs+0x0/0x30 returned 0 after 16 usecs
[    0.710604] calling  proc_schedstat_init+0x0/0x27 @ 1
[    0.710612] initcall proc_schedstat_init+0x0/0x27 returned 0 after 2 usecs
[    0.710616] calling  proc_execdomains_init+0x0/0x26 @ 1
[    0.710624] initcall proc_execdomains_init+0x0/0x26 returned 0 after 2 usecs
[    0.710629] calling  ioresources_init+0x0/0x43 @ 1
[    0.710638] initcall ioresources_init+0x0/0x43 returned 0 after 4 usecs
[    0.710643] calling  uid_cache_init+0x0/0x83 @ 1
[    0.710705] initcall uid_cache_init+0x0/0x83 returned 0 after 53 usecs
[    0.710710] calling  init_posix_timers+0x0/0x1f2 @ 1
[    0.710724] initcall init_posix_timers+0x0/0x1f2 returned 0 after 8 usecs
[    0.710729] calling  init_posix_cpu_timers+0x0/0xa1 @ 1
[    0.710736] initcall init_posix_cpu_timers+0x0/0xa1 returned 0 after 2 usecs
[    0.710741] calling  nsproxy_cache_init+0x0/0x31 @ 1
[    0.710754] initcall nsproxy_cache_init+0x0/0x31 returned 0 after 7 usecs
[    0.710763] calling  create_proc_profile+0x0/0x80 @ 1
[    0.710769] initcall create_proc_profile+0x0/0x80 returned 0 after 0 usecs
[    0.710774] calling  timekeeping_init_ops+0x0/0xd @ 1
[    0.710781] initcall timekeeping_init_ops+0x0/0xd returned 0 after 1 usecs
[    0.710786] calling  init_clocksource_sysfs+0x0/0x3f @ 1
[    0.710813] initcall init_clocksource_sysfs+0x0/0x3f returned 0 after 20 usecs
[    0.710817] calling  init_timer_list_procfs+0x0/0x2f @ 1
[    0.710826] initcall init_timer_list_procfs+0x0/0x2f returned 0 after 3 usecs
[    0.710830] calling  alarmtimer_init+0x0/0x13d @ 1
[    0.710888] initcall alarmtimer_init+0x0/0x13d returned 0 after 49 usecs
[    0.710893] calling  init_tstats_procfs+0x0/0x2f @ 1
[    0.710900] initcall init_tstats_procfs+0x0/0x2f returned 0 after 2 usecs
[    0.710904] calling  futex_init+0x0/0x55 @ 1
[    0.710922] initcall futex_init+0x0/0x55 returned 0 after 13 usecs
[    0.710926] calling  proc_dma_init+0x0/0x26 @ 1
[    0.710933] initcall proc_dma_init+0x0/0x26 returned 0 after 2 usecs
[    0.710937] calling  proc_modules_init+0x0/0x26 @ 1
[    0.710945] initcall proc_modules_init+0x0/0x26 returned 0 after 3 usecs
[    0.710949] calling  kallsyms_init+0x0/0x29 @ 1
[    0.710956] initcall kallsyms_init+0x0/0x29 returned 0 after 2 usecs
[    0.710960] calling  snapshot_device_init+0x0/0xa @ 1
[    0.711023] initcall snapshot_device_init+0x0/0xa returned 0 after 55 usecs
[    0.711029] calling  crash_save_vmcoreinfo_init+0x0/0x4b3 @ 1
[    0.711069] initcall crash_save_vmcoreinfo_init+0x0/0x4b3 returned 0 after 33 usecs
[    0.711073] calling  crash_notes_memory_init+0x0/0x30 @ 1
[    0.711089] initcall crash_notes_memory_init+0x0/0x30 returned 0 after 10 usecs
[    0.711093] calling  user_namespaces_init+0x0/0x31 @ 1
[    0.711114] initcall user_namespaces_init+0x0/0x31 returned 0 after 15 usecs
[    0.711118] calling  pid_namespaces_init+0x0/0x31 @ 1
[    0.711128] initcall pid_namespaces_init+0x0/0x31 returned 0 after 5 usecs
[    0.711133] calling  ikconfig_init+0x0/0x42 @ 1
[    0.711142] initcall ikconfig_init+0x0/0x42 returned 0 after 4 usecs
[    0.711146] calling  audit_init+0x0/0x11 @ 1
[    0.711150] audit: initializing netlink socket (disabled)
[    0.711177] type=2000 audit(1313909694.704:1): initialized
[    0.711184] initcall audit_init+0x0/0x11 returned 0 after 32 usecs
[    0.711188] calling  audit_watch_init+0x0/0x2d @ 1
[    0.711195] initcall audit_watch_init+0x0/0x2d returned 0 after 1 usecs
[    0.711199] calling  audit_tree_init+0x0/0x3e @ 1
[    0.711206] initcall audit_tree_init+0x0/0x3e returned 0 after 2 usecs
[    0.711210] calling  init_kprobes+0x0/0x135 @ 1
[    0.748298] initcall init_kprobes+0x0/0x135 returned 0 after 36227 usecs
[    0.748305] calling  hung_task_init+0x0/0x52 @ 1
[    0.748438] initcall hung_task_init+0x0/0x52 returned 0 after 120 usecs
[    0.748443] calling  utsname_sysctl_init+0x0/0xd @ 1
[    0.748480] initcall utsname_sysctl_init+0x0/0xd returned 0 after 30 usecs
[    0.748488] calling  init_tracepoints+0x0/0x10 @ 1
[    0.748493] initcall init_tracepoints+0x0/0x10 returned 0 after 0 usecs
[    0.748498] calling  init_lstats_procfs+0x0/0x29 @ 1
[    0.748510] initcall init_lstats_procfs+0x0/0x29 returned 0 after 6 usecs
[    0.748514] calling  init_events+0x0/0x5a @ 1
[    0.748523] initcall init_events+0x0/0x5a returned 0 after 4 usecs
[    0.748527] calling  init_blk_tracer+0x0/0x51 @ 1
[    0.748535] initcall init_blk_tracer+0x0/0x51 returned 0 after 3 usecs
[    0.748540] calling  perf_event_sysfs_init+0x0/0x8b @ 1
[    0.748679] initcall perf_event_sysfs_init+0x0/0x8b returned 0 after 129 usecs
[    0.748685] calling  init_per_zone_wmark_min+0x0/0x7f @ 1
[    0.754854] initcall init_per_zone_wmark_min+0x0/0x7f returned 0 after 6001 usecs
[    0.754864] calling  kswapd_init+0x0/0x19 @ 1
[    0.754997] initcall kswapd_init+0x0/0x19 returned 0 after 120 usecs
[    0.755002] calling  extfrag_debug_init+0x0/0x75 @ 1
[    0.755044] initcall extfrag_debug_init+0x0/0x75 returned 0 after 36 usecs
[    0.755049] calling  setup_vmstat+0x0/0xc6 @ 1
[    0.755079] initcall setup_vmstat+0x0/0xc6 returned 0 after 24 usecs
[    0.755084] calling  mm_sysfs_init+0x0/0x1e @ 1
[    0.755103] initcall mm_sysfs_init+0x0/0x1e returned 0 after 13 usecs
[    0.755107] calling  proc_vmalloc_init+0x0/0x29 @ 1
[    0.755115] initcall proc_vmalloc_init+0x0/0x29 returned 0 after 3 usecs
[    0.755121] calling  init_emergency_pool+0x0/0x5f @ 1
[    0.755148] highmem bounce pool size: 64 pages
[    0.755153] initcall init_emergency_pool+0x0/0x5f returned 0 after 26 usecs
[    0.755158] calling  procswaps_init+0x0/0x26 @ 1
[    0.755165] initcall procswaps_init+0x0/0x26 returned 0 after 2 usecs
[    0.755170] calling  hugetlb_init+0x0/0x1bc @ 1
[    0.755177] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.755193] initcall hugetlb_init+0x0/0x1bc returned 0 after 17 usecs
[    0.755198] calling  ksm_init+0x0/0xb0 @ 1
[    0.755293] initcall ksm_init+0x0/0xb0 returned 0 after 85 usecs
[    0.755298] calling  slab_proc_init+0x0/0x29 @ 1
[    0.755307] initcall slab_proc_init+0x0/0x29 returned 0 after 3 usecs
[    0.755311] calling  cpucache_init+0x0/0x36 @ 1
[    0.755318] initcall cpucache_init+0x0/0x36 returned 0 after 1 usecs
[    0.755323] calling  hugepage_init+0x0/0x11b @ 1
[    0.767284] initcall hugepage_init+0x0/0x11b returned 0 after 11662 usecs
[    0.767293] calling  init_cleancache+0x0/0x12 @ 1
[    0.767318] initcall init_cleancache+0x0/0x12 returned 0 after 18 usecs
[    0.767323] calling  fcntl_init+0x0/0x2e @ 1
[    0.767379] initcall fcntl_init+0x0/0x2e returned 0 after 48 usecs
[    0.767383] calling  proc_filesystems_init+0x0/0x26 @ 1
[    0.767403] initcall proc_filesystems_init+0x0/0x26 returned 0 after 14 usecs
[    0.767408] calling  fsnotify_mark_init+0x0/0x45 @ 1
[    0.767546] initcall fsnotify_mark_init+0x0/0x45 returned 0 after 125 usecs
[    0.767551] calling  dnotify_init+0x0/0x7b @ 1
[    0.767570] initcall dnotify_init+0x0/0x7b returned 0 after 13 usecs
[    0.767575] calling  inotify_user_setup+0x0/0x77 @ 1
[    0.767590] initcall inotify_user_setup+0x0/0x77 returned 0 after 9 usecs
[    0.767595] calling  fanotify_user_setup+0x0/0x59 @ 1
[    0.767610] initcall fanotify_user_setup+0x0/0x59 returned 0 after 9 usecs
[    0.767614] calling  aio_setup+0x0/0xad @ 1
[    0.767642] initcall aio_setup+0x0/0xad returned 0 after 22 usecs
[    0.767647] calling  proc_locks_init+0x0/0x26 @ 1
[    0.767655] initcall proc_locks_init+0x0/0x26 returned 0 after 3 usecs
[    0.767659] calling  init_mbcache+0x0/0xd @ 1
[    0.767665] initcall init_mbcache+0x0/0xd returned 0 after 1 usecs
[    0.767670] calling  dquot_init+0x0/0x10e @ 1
[    0.767673] VFS: Disk quotas dquot_6.5.2
[    0.767727] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.767732] initcall dquot_init+0x0/0x10e returned 0 after 56 usecs
[    0.767736] calling  quota_init+0x0/0x1f @ 1
[    0.767755] initcall quota_init+0x0/0x1f returned 0 after 14 usecs
[    0.767759] calling  proc_cmdline_init+0x0/0x26 @ 1
[    0.767769] initcall proc_cmdline_init+0x0/0x26 returned 0 after 4 usecs
[    0.767773] calling  proc_consoles_init+0x0/0x26 @ 1
[    0.767780] initcall proc_consoles_init+0x0/0x26 returned 0 after 2 usecs
[    0.767784] calling  proc_cpuinfo_init+0x0/0x26 @ 1
[    0.767792] initcall proc_cpuinfo_init+0x0/0x26 returned 0 after 2 usecs
[    0.767796] calling  proc_devices_init+0x0/0x26 @ 1
[    0.767803] initcall proc_devices_init+0x0/0x26 returned 0 after 2 usecs
[    0.767807] calling  proc_interrupts_init+0x0/0x26 @ 1
[    0.767814] initcall proc_interrupts_init+0x0/0x26 returned 0 after 2 usecs
[    0.767818] calling  proc_loadavg_init+0x0/0x26 @ 1
[    0.767825] initcall proc_loadavg_init+0x0/0x26 returned 0 after 2 usecs
[    0.767829] calling  proc_meminfo_init+0x0/0x26 @ 1
[    0.767836] initcall proc_meminfo_init+0x0/0x26 returned 0 after 2 usecs
[    0.767840] calling  proc_stat_init+0x0/0x26 @ 1
[    0.767847] initcall proc_stat_init+0x0/0x26 returned 0 after 2 usecs
[    0.767851] calling  proc_uptime_init+0x0/0x26 @ 1
[    0.767858] initcall proc_uptime_init+0x0/0x26 returned 0 after 2 usecs
[    0.767862] calling  proc_version_init+0x0/0x26 @ 1
[    0.767870] initcall proc_version_init+0x0/0x26 returned 0 after 2 usecs
[    0.767874] calling  proc_softirqs_init+0x0/0x26 @ 1
[    0.767881] initcall proc_softirqs_init+0x0/0x26 returned 0 after 2 usecs
[    0.767885] calling  proc_kcore_init+0x0/0xad @ 1
[    0.767894] initcall proc_kcore_init+0x0/0xad returned 0 after 4 usecs
[    0.767898] calling  vmcore_init+0x0/0x79 @ 1
[    0.767904] initcall vmcore_init+0x0/0x79 returned 0 after 1 usecs
[    0.767908] calling  proc_kmsg_init+0x0/0x29 @ 1
[    0.767915] initcall proc_kmsg_init+0x0/0x29 returned 0 after 2 usecs
[    0.767919] calling  proc_page_init+0x0/0x49 @ 1
[    0.767928] initcall proc_page_init+0x0/0x49 returned 0 after 4 usecs
[    0.767932] calling  init_devpts_fs+0x0/0x39 @ 1
[    0.767969] initcall init_devpts_fs+0x0/0x39 returned 0 after 31 usecs
[    0.767973] calling  init_ext3_fs+0x0/0x69 @ 1
[    0.767992] initcall init_ext3_fs+0x0/0x69 returned 0 after 13 usecs
[    0.767996] calling  ext4_init_fs+0x0/0x43 @ 1
[    0.768088] initcall ext4_init_fs+0x0/0x43 returned 0 after 94 usecs
[    0.768093] calling  journal_init+0x0/0x17 @ 1
[    0.768118] initcall journal_init+0x0/0x17 returned 0 after 20 usecs
[    0.768122] calling  journal_init+0x0/0x28 @ 1
[    0.768153] initcall journal_init+0x0/0x28 returned 0 after 25 usecs
[    0.768157] calling  init_ramfs_fs+0x0/0xa @ 1
[    0.768164] initcall init_ramfs_fs+0x0/0xa returned 0 after 2 usecs
[    0.768168] calling  init_hugetlbfs_fs+0x0/0x88 @ 1
[    0.768205] initcall init_hugetlbfs_fs+0x0/0x88 returned 0 after 30 usecs
[    0.768209] calling  init_iso9660_fs+0x0/0x67 @ 1
[    0.768233] initcall init_iso9660_fs+0x0/0x67 returned 0 after 17 usecs
[    0.768237] calling  init_pstore_fs+0x0/0xa @ 1
[    0.768244] initcall init_pstore_fs+0x0/0xa returned 0 after 2 usecs
[    0.768248] calling  ipc_init+0x0/0x1c @ 1
[    0.768257] msgmni has been set to 1731
[    0.768266] initcall ipc_init+0x0/0x1c returned 0 after 13 usecs
[    0.768270] calling  ipc_sysctl_init+0x0/0xd @ 1
[    0.768302] initcall ipc_sysctl_init+0x0/0xd returned 0 after 26 usecs
[    0.768306] calling  init_mqueue_fs+0x0/0x9c @ 1
[    0.768355] initcall init_mqueue_fs+0x0/0x9c returned 0 after 41 usecs
[    0.768359] calling  key_proc_init+0x0/0x36 @ 1
[    0.768368] initcall key_proc_init+0x0/0x36 returned 0 after 3 usecs
[    0.768372] calling  selinux_nf_ip_init+0x0/0x64 @ 1
[    0.768378] initcall selinux_nf_ip_init+0x0/0x64 returned 0 after 1 usecs
[    0.768382] calling  init_sel_fs+0x0/0x80 @ 1
[    0.768388] initcall init_sel_fs+0x0/0x80 returned 0 after 1 usecs
[    0.768392] calling  selnl_init+0x0/0x58 @ 1
[    0.768413] initcall selnl_init+0x0/0x58 returned 0 after 15 usecs
[    0.768417] calling  sel_netif_init+0x0/0x71 @ 1
[    0.768423] initcall sel_netif_init+0x0/0x71 returned 0 after 0 usecs
[    0.768427] calling  sel_netnode_init+0x0/0x76 @ 1
[    0.768432] initcall sel_netnode_init+0x0/0x76 returned 0 after 0 usecs
[    0.768436] calling  sel_netport_init+0x0/0x76 @ 1
[    0.768442] initcall sel_netport_init+0x0/0x76 returned 0 after 0 usecs
[    0.768446] calling  aurule_init+0x0/0x45 @ 1
[    0.768452] initcall aurule_init+0x0/0x45 returned 0 after 1 usecs
[    0.768456] calling  crypto_wq_init+0x0/0x37 @ 1
[    0.768500] initcall crypto_wq_init+0x0/0x37 returned 0 after 36 usecs
[    0.768504] calling  crypto_algapi_init+0x0/0x8 @ 1
[    0.768513] initcall crypto_algapi_init+0x0/0x8 returned 0 after 3 usecs
[    0.768517] calling  skcipher_module_init+0x0/0x24 @ 1
[    0.768523] initcall skcipher_module_init+0x0/0x24 returned 0 after 1 usecs
[    0.768527] calling  chainiv_module_init+0x0/0xa @ 1
[    0.768535] initcall chainiv_module_init+0x0/0xa returned 0 after 2 usecs
[    0.768539] calling  eseqiv_module_init+0x0/0xa @ 1
[    0.768545] initcall eseqiv_module_init+0x0/0xa returned 0 after 0 usecs
[    0.768549] calling  hmac_module_init+0x0/0xa @ 1
[    0.768555] initcall hmac_module_init+0x0/0xa returned 0 after 0 usecs
[    0.768559] calling  aes_init+0x0/0xa @ 1
[    0.768642] initcall aes_init+0x0/0xa returned 0 after 75 usecs
[    0.768647] calling  crc32c_mod_init+0x0/0xa @ 1
[    0.768685] initcall crc32c_mod_init+0x0/0xa returned 0 after 31 usecs
[    0.768689] calling  krng_mod_init+0x0/0xa @ 1
[    0.768726] initcall krng_mod_init+0x0/0xa returned 0 after 30 usecs
[    0.768731] calling  proc_genhd_init+0x0/0x43 @ 1
[    0.768741] initcall proc_genhd_init+0x0/0x43 returned 0 after 5 usecs
[    0.768746] calling  bsg_init+0x0/0x115 @ 1
[    0.768786] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.768792] initcall bsg_init+0x0/0x115 returned 0 after 40 usecs
[    0.768797] calling  init_cgroup_blkio+0x0/0xa @ 1
[    0.768804] initcall init_cgroup_blkio+0x0/0xa returned 0 after 1 usecs
[    0.768808] calling  throtl_init+0x0/0x48 @ 1
[    0.768839] initcall throtl_init+0x0/0x48 returned 0 after 25 usecs
[    0.768844] calling  noop_init+0x0/0xd @ 1
[    0.768848] io scheduler noop registered
[    0.768853] initcall noop_init+0x0/0xd returned 0 after 4 usecs
[    0.768857] calling  deadline_init+0x0/0xd @ 1
[    0.768861] io scheduler deadline registered
[    0.768866] initcall deadline_init+0x0/0xd returned 0 after 3 usecs
[    0.768870] calling  cfq_init+0x0/0xba @ 1
[    0.768884] io scheduler cfq registered (default)
[    0.768889] initcall cfq_init+0x0/0xba returned 0 after 14 usecs
[    0.768894] calling  btree_module_init+0x0/0x2e @ 1
[    0.768905] initcall btree_module_init+0x0/0x2e returned 0 after 6 usecs
[    0.768910] calling  libcrc32c_mod_init+0x0/0x22 @ 1
[    0.768919] initcall libcrc32c_mod_init+0x0/0x22 returned 0 after 3 usecs
[    0.768924] calling  percpu_counter_startup+0x0/0x12 @ 1
[    0.768932] initcall percpu_counter_startup+0x0/0x12 returned 0 after 3 usecs
[    0.768936] calling  audit_classes_init+0x0/0x4b @ 1
[    0.768945] initcall audit_classes_init+0x0/0x4b returned 0 after 3 usecs
[    0.768950] calling  dynamic_debug_init_debugfs+0x0/0x62 @ 1
[    0.768971] initcall dynamic_debug_init_debugfs+0x0/0x62 returned 0 after 15 usecs
[    0.768975] calling  lnw_gpio_init+0x0/0x36 @ 1
[    0.769036] initcall lnw_gpio_init+0x0/0x36 returned 0 after 53 usecs
[    0.769040] calling  ucb1400_gpio_init+0x0/0xa @ 1
[    0.769056] initcall ucb1400_gpio_init+0x0/0xa returned 0 after 10 usecs
[    0.769061] calling  pci_proc_init+0x0/0x61 @ 1
[    0.769128] initcall pci_proc_init+0x0/0x61 returned 0 after 60 usecs
[    0.769133] calling  pcie_portdrv_init+0x0/0x6c @ 1
[    0.769196] initcall pcie_portdrv_init+0x0/0x6c returned 0 after 55 usecs
[    0.769201] calling  aer_service_init+0x0/0x22 @ 1
[    0.769219] initcall aer_service_init+0x0/0x22 returned 0 after 12 usecs
[    0.769223] calling  pcie_pme_service_init+0x0/0xa @ 1
[    0.769239] initcall pcie_pme_service_init+0x0/0xa returned 0 after 9 usecs
[    0.769243] calling  ioapic_init+0x0/0x11 @ 1
[    0.769263] initcall ioapic_init+0x0/0x11 returned 0 after 14 usecs
[    0.769268] calling  pci_stub_init+0x0/0x24 @ 1
[    0.769288] initcall pci_stub_init+0x0/0x24 returned 0 after 13 usecs
[    0.769292] calling  fb_console_init+0x0/0x10c @ 1
[    0.769341] initcall fb_console_init+0x0/0x10c returned 0 after 41 usecs
[    0.769346] calling  vesafb_init+0x0/0x7a @ 1
[    0.769435] initcall vesafb_init+0x0/0x7a returned -19 after 80 usecs
[    0.769440] calling  efifb_init+0x0/0x77 @ 1
[    0.769480] initcall efifb_init+0x0/0x77 returned -19 after 33 usecs
[    0.769485] calling  intel_idle_init+0x0/0x60 @ 1
[    0.769492] initcall intel_idle_init+0x0/0x60 returned -19 after 1 usecs
[    0.769496] calling  acpi_reserve_resources+0x0/0xc4 @ 1
[    0.769508] initcall acpi_reserve_resources+0x0/0xc4 returned 0 after 7 usecs
[    0.769513] calling  irqrouter_init_ops+0x0/0x1f @ 1
[    0.769519] initcall irqrouter_init_ops+0x0/0x1f returned 0 after 1 usecs
[    0.769523] calling  erst_init+0x0/0x287 @ 1
[    0.769529] ERST: Table is not found!
[    0.769533] initcall erst_init+0x0/0x287 returned 0 after 5 usecs
[    0.769538] calling  pnpbios_thread_init+0x0/0x5d @ 1
[    0.769544] initcall pnpbios_thread_init+0x0/0x5d returned 0 after 1 usecs
[    0.769548] calling  isapnp_init+0x0/0x7f @ 1
[    0.769572] isapnp: Scanning for PnP cards...
[    1.120631] isapnp: No Plug & Play device found
[    1.120637] initcall isapnp_init+0x0/0x7f returned 0 after 342861 usecs
[    1.120642] calling  pty_init+0x0/0xd @ 1
[    1.120786] initcall pty_init+0x0/0xd returned 0 after 134 usecs
[    1.120790] calling  sysrq_init+0x0/0x79 @ 1
[    1.120802] initcall sysrq_init+0x0/0x79 returned 0 after 6 usecs
[    1.120807] calling  serial8250_init+0x0/0x66 @ 1
[    1.120811] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled
[    1.122339] initcall serial8250_init+0x0/0x66 returned 0 after 1479 usecs
[    1.122345] calling  serial8250_pnp_init+0x0/0xa @ 1
[    1.122558] initcall serial8250_pnp_init+0x0/0xa returned 0 after 202 usecs
[    1.122563] calling  serial8250_pci_init+0x0/0x11 @ 1
[    1.122613] initcall serial8250_pci_init+0x0/0x11 returned 0 after 42 usecs
[    1.122619] calling  rand_initialize+0x0/0x30 @ 1
[    1.122650] initcall rand_initialize+0x0/0x30 returned 0 after 24 usecs
[    1.122655] calling  hpet_init+0x0/0x53 @ 1
[    1.122756] initcall hpet_init+0x0/0x53 returned 0 after 92 usecs
[    1.122760] calling  nvram_init+0x0/0x7b @ 1
[    1.122800] Non-volatile memory driver v1.3
[    1.122806] initcall nvram_init+0x0/0x7b returned 0 after 39 usecs
[    1.122810] calling  agp_init+0x0/0x2e @ 1
[    1.122814] Linux agpgart interface v0.103
[    1.122819] initcall agp_init+0x0/0x2e returned 0 after 3 usecs
[    1.122823] calling  agp_ali_init+0x0/0x20 @ 1
[    1.122843] initcall agp_ali_init+0x0/0x20 returned 0 after 14 usecs
[    1.122848] calling  agp_ati_init+0x0/0x20 @ 1
[    1.122867] initcall agp_ati_init+0x0/0x20 returned 0 after 13 usecs
[    1.122871] calling  agp_amdk7_init+0x0/0x20 @ 1
[    1.122891] initcall agp_amdk7_init+0x0/0x20 returned 0 after 13 usecs
[    1.122895] calling  agp_amd64_mod_init+0x0/0x5 @ 1
[    1.122932] initcall agp_amd64_mod_init+0x0/0x5 returned -19 after 30 usecs
[    1.122937] calling  agp_efficeon_init+0x0/0x36 @ 1
[    1.122956] initcall agp_efficeon_init+0x0/0x36 returned 0 after 13 usecs
[    1.122961] calling  agp_intel_init+0x0/0x20 @ 1
[    1.122985] initcall agp_intel_init+0x0/0x20 returned 0 after 18 usecs
[    1.122990] calling  agp_nvidia_init+0x0/0x20 @ 1
[    1.123009] initcall agp_nvidia_init+0x0/0x20 returned 0 after 13 usecs
[    1.123014] calling  agp_sis_init+0x0/0x20 @ 1
[    1.123035] initcall agp_sis_init+0x0/0x20 returned 0 after 16 usecs
[    1.123040] calling  agp_serverworks_init+0x0/0x20 @ 1
[    1.123060] initcall agp_serverworks_init+0x0/0x20 returned 0 after 14 usecs
[    1.123065] calling  agp_via_init+0x0/0x20 @ 1
[    1.123087] agpgart: Detected VIA VT3314 chipset
[    1.142699] agpgart-via 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[    1.142773] initcall agp_via_init+0x0/0x20 returned 0 after 19236 usecs
[    1.142779] calling  cn_proc_init+0x0/0x2d @ 1
[    1.142789] initcall cn_proc_init+0x0/0x2d returned 0 after 5 usecs
[    1.142795] calling  isa_bus_init+0x0/0x2f @ 1
[    1.142838] initcall isa_bus_init+0x0/0x2f returned 0 after 36 usecs
[    1.142845] calling  topology_sysfs_init+0x0/0x51 @ 1
[    1.142860] initcall topology_sysfs_init+0x0/0x51 returned 0 after 10 usecs
[    1.142865] calling  init_sd+0x0/0x110 @ 1
[    1.142954] initcall init_sd+0x0/0x110 returned 0 after 81 usecs
[    1.142959] calling  ce4100_spi_init+0x0/0x11 @ 1
[    1.142993] initcall ce4100_spi_init+0x0/0x11 returned 0 after 27 usecs
[    1.142998] calling  fixed_mdio_bus_init+0x0/0xec @ 1
[    1.143065] Fixed MDIO Bus: probed
[    1.143070] initcall fixed_mdio_bus_init+0x0/0xec returned 0 after 64 usecs
[    1.143075] calling  net_olddevs_init+0x0/0x14 @ 1
[    1.143089] initcall net_olddevs_init+0x0/0x14 returned 0 after 8 usecs
[    1.143094] calling  kgdbdbgp_start_thread+0x0/0x56 @ 1
[    1.143101] initcall kgdbdbgp_start_thread+0x0/0x56 returned 0 after 1 usecs
[    1.143106] calling  i8042_init+0x0/0x81 @ 1
[    1.143194] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.144039] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.144047] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.144064] initcall i8042_init+0x0/0x81 returned 0 after 951 usecs
[    1.144069] calling  mousedev_init+0x0/0x7c @ 1
[    1.144159] mousedev: PS/2 mouse device common for all mice
[    1.144166] initcall mousedev_init+0x0/0x7c returned 0 after 88 usecs
[    1.144170] calling  evdev_init+0x0/0xa @ 1
[    1.144176] initcall evdev_init+0x0/0xa returned 0 after 1 usecs
[    1.144181] calling  atkbd_init+0x0/0x1b @ 1
[    1.144215] initcall atkbd_init+0x0/0x1b returned 0 after 28 usecs
[    1.144220] calling  psmouse_init+0x0/0x7a @ 1
[    1.144436] initcall psmouse_init+0x0/0x7a returned 0 after 202 usecs
[    1.144441] calling  ce4100_i2c_init+0x0/0x11 @ 1
[    1.144463] initcall ce4100_i2c_init+0x0/0x11 returned 0 after 16 usecs
[    1.144467] calling  init_ladder+0x0/0xa @ 1
[    1.144473] cpuidle: using governor ladder
[    1.144477] initcall init_ladder+0x0/0xa returned 0 after 5 usecs
[    1.144481] calling  init_menu+0x0/0xa @ 1
[    1.144485] cpuidle: using governor menu
[    1.144489] initcall init_menu+0x0/0xa returned 0 after 3 usecs
[    1.144493] calling  staging_init+0x0/0x3 @ 1
[    1.144499] initcall staging_init+0x0/0x3 returned 0 after 1 usecs
[    1.144504] calling  flow_cache_init_global+0x0/0x30 @ 1
[    1.144533] initcall flow_cache_init_global+0x0/0x30 returned 0 after 23 usecs
[    1.144538] calling  blackhole_module_init+0x0/0xa @ 1
[    1.144546] initcall blackhole_module_init+0x0/0xa returned 0 after 2 usecs
[    1.144550] calling  init_cgroup_cls+0x0/0x2f @ 1
[    1.144558] initcall init_cgroup_cls+0x0/0x2f returned 0 after 2 usecs
[    1.144562] calling  sysctl_ipv4_init+0x0/0x6d @ 1
[    1.144839] initcall sysctl_ipv4_init+0x0/0x6d returned 0 after 263 usecs
[    1.144844] calling  init_syncookies+0x0/0x12 @ 1
[    1.144896] initcall init_syncookies+0x0/0x12 returned 0 after 45 usecs
[    1.144903] calling  ipv4_netfilter_init+0x0/0x10 @ 1
[    1.144910] initcall ipv4_netfilter_init+0x0/0x10 returned 0 after 1 usecs
[    1.144914] calling  cubictcp_register+0x0/0x7e @ 1
[    1.144919] TCP cubic registered
[    1.144924] initcall cubictcp_register+0x0/0x7e returned 0 after 4 usecs
[    1.144929] calling  inet6_init+0x0/0x4b @ 1
[    1.144971] NET: Registered protocol family 10
[    1.145700] initcall inet6_init+0x0/0x4b returned 0 after 740 usecs
[    1.145705] calling  dsa_init_module+0x0/0xd @ 1
[    1.145712] initcall dsa_init_module+0x0/0xd returned 0 after 1 usecs
[    1.145716] calling  edsa_init_module+0x0/0xd @ 1
[    1.145722] initcall edsa_init_module+0x0/0xd returned 0 after 0 usecs
[    1.145727] calling  trailer_init_module+0x0/0xd @ 1
[    1.145733] initcall trailer_init_module+0x0/0xd returned 0 after 1 usecs
[    1.145737] calling  mv88e6060_init+0x0/0xd @ 1
[    1.145744] initcall mv88e6060_init+0x0/0xd returned 0 after 1 usecs
[    1.145748] calling  mv88e6123_61_65_init+0x0/0xd @ 1
[    1.145754] initcall mv88e6123_61_65_init+0x0/0xd returned 0 after 0 usecs
[    1.145759] calling  mv88e6131_init+0x0/0xd @ 1
[    1.145765] initcall mv88e6131_init+0x0/0xd returned 0 after 0 usecs
[    1.145769] calling  dsa_init_module+0x0/0xa @ 1
[    1.145793] initcall dsa_init_module+0x0/0xa returned 0 after 17 usecs
[    1.145798] calling  dcbnl_init+0x0/0x49 @ 1
[    1.145804] initcall dcbnl_init+0x0/0x49 returned 0 after 1 usecs
[    1.145809] calling  init_dns_resolver+0x0/0xf3 @ 1
[    1.145813] Registering the dns_resolver key type
[    1.145831] initcall init_dns_resolver+0x0/0xf3 returned 0 after 16 usecs
[    1.145836] calling  init_ceph_lib+0x0/0x7c @ 1
[    1.145856] libceph: loaded (mon/osd proto 15/24, osdmap 5/6 5/6)
[    1.145861] initcall init_ceph_lib+0x0/0x7c returned 0 after 19 usecs
[    1.145866] calling  rio_init_mports+0x0/0x4a @ 1
[    1.145873] initcall rio_init_mports+0x0/0x4a returned 0 after 2 usecs
[    1.145881] calling  mcheck_debugfs_init+0x0/0x3d @ 1
[    1.145891] initcall mcheck_debugfs_init+0x0/0x3d returned 0 after 5 usecs
[    1.145896] calling  severities_debugfs_init+0x0/0x3d @ 1
[    1.145904] initcall severities_debugfs_init+0x0/0x3d returned 0 after 3 usecs
[    1.145909] calling  hpet_insert_resource+0x0/0x1a @ 1
[    1.145916] initcall hpet_insert_resource+0x0/0x1a returned 1 after 1 usecs
[    1.145921] initcall hpet_insert_resource+0x0/0x1a returned with error code 1 
[    1.145927] calling  update_mp_table+0x0/0x11 @ 1
[    1.145933] initcall update_mp_table+0x0/0x11 returned 0 after 1 usecs
[    1.145937] calling  lapic_insert_resource+0x0/0x31 @ 1
[    1.145949] initcall lapic_insert_resource+0x0/0x31 returned 0 after 6 usecs
[    1.145953] calling  io_apic_bug_finalize+0x0/0x16 @ 1
[    1.145959] initcall io_apic_bug_finalize+0x0/0x16 returned 0 after 1 usecs
[    1.145963] calling  print_ipi_mode+0x0/0x2c @ 1
[    1.145967] Using IPI No-Shortcut mode
[    1.145972] initcall print_ipi_mode+0x0/0x2c returned 0 after 3 usecs
[    1.145977] calling  check_early_ioremap_leak+0x0/0x53 @ 1
[    1.145984] initcall check_early_ioremap_leak+0x0/0x53 returned 0 after 1 usecs
[    1.145988] calling  pat_memtype_list_init+0x0/0x36 @ 1
[    1.145994] initcall pat_memtype_list_init+0x0/0x36 returned 0 after 1 usecs
[    1.145999] calling  sched_init_debug+0x0/0x2a @ 1
[    1.146008] initcall sched_init_debug+0x0/0x2a returned 0 after 3 usecs
[    1.146016] calling  init_oops_id+0x0/0x40 @ 1
[    1.146026] initcall init_oops_id+0x0/0x40 returned 0 after 4 usecs
[    1.146031] calling  printk_late_init+0x0/0x49 @ 1
[    1.146038] initcall printk_late_init+0x0/0x49 returned 0 after 2 usecs
[    1.146043] calling  pm_qos_power_init+0x0/0xb9 @ 1
[    1.146162] initcall pm_qos_power_init+0x0/0xb9 returned 0 after 109 usecs
[    1.146167] calling  software_resume+0x0/0x20 @ 1
[    1.146172] PM: Checking hibernation image partition /dev/disk/by-id/ata-SAMSUNG_HM040HI_S07WJ10Y710009-part1
[    1.149553] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.418041] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input1
[    1.433679] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input2
[    1.436811] async_waiting @ 1
[    1.436816] async_continuing @ 1 after 1 usec
[    1.436820] PM: Hibernation image not present or could not be loaded.
[    1.436826] initcall software_resume+0x0/0x20 returned -19 after 283855 usecs
[    1.436835] calling  debugfs_kprobe_init+0x0/0x90 @ 1
[    1.436855] initcall debugfs_kprobe_init+0x0/0x90 returned 0 after 14 usecs
[    1.436860] calling  taskstats_init+0x0/0x82 @ 1
[    1.436874] registered taskstats version 1
[    1.436879] initcall taskstats_init+0x0/0x82 returned 0 after 13 usecs
[    1.436883] calling  clear_boot_tracer+0x0/0x2c @ 1
[    1.436889] initcall clear_boot_tracer+0x0/0x2c returned 0 after 1 usecs
[    1.436894] calling  kdb_ftrace_register+0x0/0x34 @ 1
[    1.436906] initcall kdb_ftrace_register+0x0/0x34 returned 0 after 7 usecs
[    1.436912] calling  max_swapfiles_check+0x0/0x3 @ 1
[    1.436918] initcall max_swapfiles_check+0x0/0x3 returned 0 after 0 usecs
[    1.436925] calling  set_recommended_min_free_kbytes+0x0/0x90 @ 1
[    1.443041] initcall set_recommended_min_free_kbytes+0x0/0x90 returned 0 after 5949 usecs
[    1.443052] calling  random32_reseed+0x0/0x7a @ 1
[    1.443072] initcall random32_reseed+0x0/0x7a returned 0 after 14 usecs
[    1.443077] calling  pci_resource_alignment_sysfs_init+0x0/0xf @ 1
[    1.443097] initcall pci_resource_alignment_sysfs_init+0x0/0xf returned 0 after 13 usecs
[    1.443101] calling  pci_sysfs_init+0x0/0x40 @ 1
[    1.443455] initcall pci_sysfs_init+0x0/0x40 returned 0 after 334 usecs
[    1.443463] calling  regulator_init_complete+0x0/0x115 @ 1
[    1.443471] initcall regulator_init_complete+0x0/0x115 returned 0 after 2 usecs
[    1.443475] calling  seqgen_init+0x0/0xa @ 1
[    1.443504] initcall seqgen_init+0x0/0xa returned 0 after 22 usecs
[    1.443510] calling  late_resume_init+0x0/0x190 @ 1
[    1.443515]   Magic number: 7:116:924
[    1.443654] initcall late_resume_init+0x0/0x190 returned 0 after 134 usecs
[    1.443662] calling  scsi_complete_async_scans+0x0/0x100 @ 1
[    1.443668] initcall scsi_complete_async_scans+0x0/0x100 returned 0 after 1 usecs
[    1.443675] calling  rtc_hctosys+0x0/0x10f @ 1
[    1.443682] /usr/src/packages/BUILD/kernel-default-3.0.0/linux-3.0/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.443742] initcall rtc_hctosys+0x0/0x10f returned -19 after 59 usecs
[    1.443746] calling  memmap_init+0x0/0x25 @ 1
[    1.443795] initcall memmap_init+0x0/0x25 returned 0 after 43 usecs
[    1.443800] calling  pci_mmcfg_late_insert_resources+0x0/0x4b @ 1
[    1.443807] initcall pci_mmcfg_late_insert_resources+0x0/0x4b returned 1 after 1 usecs
[    1.443812] initcall pci_mmcfg_late_insert_resources+0x0/0x4b returned with error code 1 
[    1.443817] calling  tcp_congestion_default+0x0/0xa @ 1
[    1.443825] initcall tcp_congestion_default+0x0/0xa returned 0 after 2 usecs
[    1.443831] calling  ip_auto_config+0x0/0x2f @ 1
[    1.443852] initcall ip_auto_config+0x0/0x2f returned 0 after 15 usecs
[    1.443857] calling  initialize_hashrnd+0x0/0x12 @ 1
[    1.443866] initcall initialize_hashrnd+0x0/0x12 returned 0 after 4 usecs
[    1.443963] async_waiting @ 1
[    1.443969] async_continuing @ 1 after 1 usec
[    1.443995] Freeing unused kernel memory: 468k freed
[    1.444378] Write protecting the kernel text: 4552k
[    1.444453] Write protecting the kernel read-only data: 3168k
[    1.505980] calling  hwmon_init+0x0/0xf4b [hwmon] @ 59
[    1.506026] initcall hwmon_init+0x0/0xf4b [hwmon] returned 0 after 34 usecs
[    1.506474] calling  thermal_init+0x0/0x1000 [thermal_sys] @ 59
[    1.506506] initcall thermal_init+0x0/0x1000 [thermal_sys] returned 0 after 23 usecs
[    1.507426] calling  acpi_processor_init+0x0/0x1000 [processor] @ 59
[    1.507433] ACPI: acpi_idle registered with cpuidle
[    1.507638] Marking TSC unstable due to TSC halts in idle
[    1.507849] initcall acpi_processor_init+0x0/0x1000 [processor] returned 0 after 397 usecs
[    1.510905] calling  acpi_thermal_init+0x0/0x1000 [thermal] @ 60
[    1.513517] thermal LNXTHERM:00: registered as thermal_zone0
[    1.513527] ACPI: Thermal Zone [THRM] (53 C)
[    1.513552] initcall acpi_thermal_init+0x0/0x1000 [thermal] returned 0 after 2583 usecs
[    1.516351] calling  acpi_fan_init+0x0/0x1000 [fan] @ 61
[    1.516481] ACPI: Fan [FAN] (on)
[    1.516499] initcall acpi_fan_init+0x0/0x1000 [fan] returned 0 after 135 usecs
[    1.519711] calling  i2c_init+0x0/0x1000 [i2c_core] @ 62
[    1.519773] initcall i2c_init+0x0/0x1000 [i2c_core] returned 0 after 47 usecs
[    1.521714] calling  via_core_init+0x0/0xcda [viafb] @ 62
[    1.521723] VIA Graphics Integration Chipset framebuffer 2.4 initializing
[    1.521867] viafb 0000:01:00.0: power state changed by ACPI to D0
[    1.521875] viafb 0000:01:00.0: power state changed by ACPI to D0
[    1.521903] viafb 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 0
[    1.536509] fbcon: Via (fb0) is primary device
[    1.552494] Console: switching to colour frame buffer device 128x48
[    1.567895] initcall via_core_init+0x0/0xcda [viafb] returned 0 after 45066 usecs
[    1.580321] udevd[66]: starting version 172
[    1.647192] calling  ata_init+0x0/0x4e [libata] @ 98
[    1.666097] calling  usb_init+0x0/0x159 [usbcore] @ 100
[    1.666185] usbcore: registered new interface driver usbfs
[    1.666239] usbcore: registered new interface driver hub
[    1.687314] libata version 3.00 loaded.
[    1.687360] initcall ata_init+0x0/0x4e [libata] returned 0 after 39180 usecs
[    1.687961] calling  svia_init+0x0/0x1000 [sata_via] @ 98
[    1.688006] sata_via 0000:00:0f.0: version 2.6
[    1.688107] sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[    1.688165] sata_via 0000:00:0f.0: routed to hard irq line 9
[    1.688170] sata_via 0000:00:0f.0: enabling SATA channels (0x32)
[    1.704882] scsi0 : sata_via
[    1.712129] calling  cmos_init+0x0/0xd47 [rtc_cmos] @ 122
[    1.712182] rtc_cmos 00:02: RTC can wake from S4
[    1.712451] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.712511] rtc0: alarms up to one year, y3k, 242 bytes nvram
[    1.712539] initcall cmos_init+0x0/0xd47 [rtc_cmos] returned 0 after 386 usecs
[    1.724167] scsi1 : sata_via
[    1.724298] ata1: SATA max UDMA/133 cmd 0x1430 ctl 0x1424 bmdma 0x1400 irq 20
[    1.724303] ata2: SATA max UDMA/133 cmd 0x1428 ctl 0x1420 bmdma 0x1408 irq 20
[    1.724365] initcall svia_init+0x0/0x1000 [sata_via] returned 0 after 35561 usecs
[    1.761645] usbcore: registered new device driver usb
[    1.761692] initcall usb_init+0x0/0x159 [usbcore] returned 0 after 93312 usecs
[    1.781261] calling  via_init+0x0/0x1000 [pata_via] @ 99
[    1.781311] pata_via 0000:00:0f.1: version 0.3.4
[    1.781420] pata_via 0000:00:0f.1: power state changed by ACPI to D0
[    1.781429] pata_via 0000:00:0f.1: power state changed by ACPI to D0
[    1.781445] pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.786781] scsi2 : pata_via
[    1.794436] scsi3 : pata_via
[    1.795496] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1410 irq 14
[    1.795501] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1418 irq 15
[    1.795580] initcall via_init+0x0/0x1000 [pata_via] returned 0 after 13949 usecs
[    1.800236] calling  ehci_hcd_init+0x0/0x1000 [ehci_hcd] @ 157
[    1.800243] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.801147] ata3: port disabled. ignoring.
[    1.825750] ACPI: PCI Interrupt Link [ALKD] disabled and referenced, BIOS bug
[    1.825858] ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 21
[    1.825863] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 21
[    1.825899] ehci_hcd 0000:00:10.4: PCI INT C -> Link[ALKD] -> GSI 21 (level, low) -> IRQ 21
[    1.825936] ehci_hcd 0000:00:10.4: EHCI Host Controller
[    1.825989] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[    1.826092] ehci_hcd 0000:00:10.4: irq 21, io mem 0xd0002800
[    1.836162] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[    1.836228] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.836233] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.836237] usb usb1: Product: EHCI Host Controller
[    1.836241] usb usb1: Manufacturer: Linux 3.0.0-2-default ehci_hcd
[    1.836244] usb usb1: SerialNumber: 0000:00:10.4
[    1.836508] hub 1-0:1.0: USB hub found
[    1.836517] hub 1-0:1.0: 4 ports detected
[    1.836666] initcall ehci_hcd_init+0x0/0x1000 [ehci_hcd] returned 0 after 35552 usecs
[    1.932030] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.096362] ata1.00: ATA-7: SAMSUNG HM040HI, YA100-02, max UDMA7
[    2.096367] ata1.00: 78140160 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.112337] ata1.00: configured for UDMA/133
[    2.112579] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HM040HI  YA10 PQ: 0 ANSI: 5
[    2.113205] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
[    2.113285] sd 0:0:0:0: [sda] Write Protect is off
[    2.113290] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.113325] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.125204]  sda: sda1 sda2 sda3 sda4
[    2.125858] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.316016] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[    2.488378] ata4.00: ATAPI: PHILIPS CD-RW/DVD-ROM SCB5265, TX06, max UDMA/33
[    2.504240] ata4.00: configured for UDMA/33
[    2.505079] scsi 3:0:0:0: CD-ROM            PHILIPS  CDRW/DVD SCB5265 TX06 PQ: 0 ANSI: 5
[    2.506095] calling  ata_generic_init+0x0/0x1000 [ata_generic] @ 98
[    2.506154] initcall ata_generic_init+0x0/0x1000 [ata_generic] returned 0 after 48 usecs
[    2.525508] calling  uhci_hcd_init+0x0/0x1000 [uhci_hcd] @ 177
[    2.525516] uhci_hcd: USB Universal Host Controller Interface driver
[    2.525643] uhci_hcd 0000:00:10.0: PCI INT A -> Link[ALKD] -> GSI 21 (level, low) -> IRQ 21
[    2.525660] uhci_hcd 0000:00:10.0: UHCI Host Controller
[    2.525687] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[    2.525733] uhci_hcd 0000:00:10.0: irq 21, io base 0x00001440
[    2.525806] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.525810] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.525815] usb usb2: Product: UHCI Host Controller
[    2.525818] usb usb2: Manufacturer: Linux 3.0.0-2-default uhci_hcd
[    2.525822] usb usb2: SerialNumber: 0000:00:10.0
[    2.526069] hub 2-0:1.0: USB hub found
[    2.526077] hub 2-0:1.0: 2 ports detected
[    2.526185] uhci_hcd 0000:00:10.1: PCI INT A -> Link[ALKD] -> GSI 21 (level, low) -> IRQ 21
[    2.526194] uhci_hcd 0000:00:10.1: UHCI Host Controller
[    2.526210] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[    2.526238] uhci_hcd 0000:00:10.1: irq 21, io base 0x00001460
[    2.526282] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    2.526286] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.526290] usb usb3: Product: UHCI Host Controller
[    2.526293] usb usb3: Manufacturer: Linux 3.0.0-2-default uhci_hcd
[    2.526297] usb usb3: SerialNumber: 0000:00:10.1
[    2.526445] hub 3-0:1.0: USB hub found
[    2.526452] hub 3-0:1.0: 2 ports detected
[    2.526550] initcall uhci_hcd_init+0x0/0x1000 [uhci_hcd] returned 0 after 997 usecs
[    3.148211] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[    3.148219] PM: Basic memory bitmaps created
[    3.157299] PM: Basic memory bitmaps freed
[    3.190968] PM: Starting manual resume from disk
[    3.190974] PM: Hibernation image partition 8:1 present
[    3.190977] PM: Looking for hibernation image.
[    3.191358] PM: Image not found (code -22)
[    3.191361] PM: Hibernation image not present or could not be loaded.
[    3.758674] kjournald starting.  Commit interval 5 seconds
[    3.759098] EXT3-fs (sda2): using internal journal
[    3.759105] EXT3-fs (sda2): mounted filesystem with ordered data mode
[    5.530927] bootchart continuing boot
[    5.989837] systemd[1]: systemd 33 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; suse)
[    6.465377] calling  init_autofs4_fs+0x0/0x1000 [autofs4] @ 276
[    6.465533] initcall init_autofs4_fs+0x0/0x1000 [autofs4] returned 0 after 139 usecs
[    6.486314] systemd[1]: Set hostname to <mobilix.zq1.de>.
[    6.671169] systemd-cryptsetup-generator[279]: Failed to open /etc/crypttab: Bad file descriptor
[    6.671659] systemd[1]: /lib/systemd/system-generators/systemd-cryptsetup-generator exited with exit status 1.
[    7.786630] systemd[1]: Cannot add dependency job for unit crypto.service, ignoring: Unit crypto.service is masked.
[    7.786672] systemd[1]: Cannot add dependency job for unit hwclock-load.service, ignoring: Unit hwclock-load.service failed to load: No such file or directory. See system logs and 'systemctl status hwclock-load.service' for details.
[    8.632987] systemd-readahead-replay[283]: Bumped block_nr parameter of /dev/sda to 16384. This is a temporary hack and should be removed one day.
[   21.448200] calling  init_module+0x0/0x10 [preloadtrace] @ 338
[   21.450367] initcall init_module+0x0/0x10 [preloadtrace] returned 0 after 2061 usecs
[   21.470816] preloadtrace: systemtap: 1.4/0.152, base: f9150000, memory: 40data/44text/6ctx/13net/260alloc kb, probes: 34
[   25.931129] systemd-fsck[405]: Root directory is writable, skipping check.
[   27.801284] udevd[406]: starting version 172
[   32.814076] calling  dm_init+0x0/0x2c [dm_mod] @ 448
[   32.814162] device-mapper: uevent: version 1.0.3
[   32.814300] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[   32.814315] initcall dm_init+0x0/0x2c [dm_mod] returned 0 after 214 usecs
[   49.564829] calling  init_pcmcia_cs+0x0/0x1000 [pcmcia_core] @ 542
[   49.564864] initcall init_pcmcia_cs+0x0/0x1000 [pcmcia_core] returned 0 after 23 usecs
[   49.566701] calling  nonstatic_sysfs_init+0x0/0x1000 [pcmcia_rsrc] @ 542
[   49.566714] initcall nonstatic_sysfs_init+0x0/0x1000 [pcmcia_rsrc] returned 0 after 2 usecs
[   49.568199] calling  yenta_socket_init+0x0/0x1000 [yenta_socket] @ 542
[   49.568270] yenta_cardbus 0000:00:0c.0: CardBus bridge found [1734:109b]
[   49.568288] yenta_cardbus 0000:00:0c.0: Enabling burst memory read transactions
[   49.568295] yenta_cardbus 0000:00:0c.0: Using CSCINT to route CSC interrupts to PCI
[   49.568299] yenta_cardbus 0000:00:0c.0: Routing CardBus interrupts to PCI
[   49.568305] yenta_cardbus 0000:00:0c.0: TI: mfunc 0x01ac1b22, devctl 0x64
[   49.800959] yenta_cardbus 0000:00:0c.0: ISA IRQ mask 0x0cf8, PCI irq 19
[   49.800966] yenta_cardbus 0000:00:0c.0: Socket status: 30000006
[   49.801772] initcall yenta_socket_init+0x0/0x1000 [yenta_socket] returned 0 after 228068 usecs
[   49.809379] calling  init_pcmcia_bus+0x0/0x1000 [pcmcia] @ 619
[   49.809424] initcall init_pcmcia_bus+0x0/0x1000 [pcmcia] returned 0 after 30 usecs
[   49.821052] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
[   49.823370] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
[   49.824269] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[   49.824956] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[   49.825717] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xd3fff 0xdc000-0xfffff
[   49.825801] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[   49.825884] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean.
[   49.825971] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[   51.970139] calling  rhine_init+0x0/0x1000 [via_rhine] @ 553
[   51.970146] via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker
[   51.970244] via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[   51.974878] via-rhine 0000:00:12.0: eth0: VIA Rhine II at 0xd0002c00, 00:40:ca:d5:7d:47, IRQ 23
[   51.975592] via-rhine 0000:00:12.0: eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000
[   51.975634] initcall rhine_init+0x0/0x1000 [via_rhine] returned 0 after 5352 usecs
[   53.524427] calling  init_soundcore+0x0/0x1000 [soundcore] @ 550
[   53.524557] initcall init_soundcore+0x0/0x1000 [soundcore] returned 0 after 114 usecs
[   53.526731] calling  alsa_sound_init+0x0/0x9f [snd] @ 550
[   53.526787] initcall alsa_sound_init+0x0/0x9f [snd] returned 0 after 40 usecs
[   53.527195] calling  alsa_seq_device_init+0x0/0x1000 [snd_seq_device] @ 550
[   53.527207] initcall alsa_seq_device_init+0x0/0x1000 [snd_seq_device] returned 0 after 3 usecs
[   53.527911] calling  alsa_rawmidi_init+0x0/0x1000 [snd_rawmidi] @ 550
[   53.527922] initcall alsa_rawmidi_init+0x0/0x1000 [snd_rawmidi] returned 0 after 1 usecs
[   53.528279] calling  alsa_mpu401_uart_init+0x0/0x1000 [snd_mpu401_uart] @ 550
[   53.528287] initcall alsa_mpu401_uart_init+0x0/0x1000 [snd_mpu401_uart] returned 0 after 0 usecs
[   53.534824] calling  snd_mem_init+0x0/0x1000 [snd_page_alloc] @ 552
[   53.534857] initcall snd_mem_init+0x0/0x1000 [snd_page_alloc] returned 0 after 21 usecs
[   53.537804] calling  alsa_timer_init+0x0/0x1000 [snd_timer] @ 552
[   53.537938] initcall alsa_timer_init+0x0/0x1000 [snd_timer] returned 0 after 117 usecs
[   53.542347] calling  alsa_pcm_init+0x0/0x1000 [snd_pcm] @ 552
[   53.542372] initcall alsa_pcm_init+0x0/0x1000 [snd_pcm] returned 0 after 10 usecs
[   53.543879] calling  ac97_bus_init+0x0/0x1000 [ac97_bus] @ 552
[   53.543912] initcall ac97_bus_init+0x0/0x1000 [ac97_bus] returned 0 after 22 usecs
[   53.547206] calling  alsa_ac97_init+0x0/0x1000 [snd_ac97_codec] @ 552
[   53.547221] initcall alsa_ac97_init+0x0/0x1000 [snd_ac97_codec] returned 0 after 1 usecs
[   53.812521] ifup[647]: Service network not started and mode 'auto' -> skipping
[   54.210704] calling  acpi_ac_init+0x0/0x1000 [ac] @ 591
[   54.211954] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[   54.212578] ACPI: AC Adapter [ACAD] (on-line)
[   54.212610] initcall acpi_ac_init+0x0/0x1000 [ac] returned 0 after 1849 usecs
[   54.580206] calling  acpi_button_init+0x0/0x1000 [button] @ 588
[   54.580330] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[   54.580464] ACPI: Power Button [PWRB]
[   54.580557] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
[   54.580683] ACPI: Lid Switch [LID]
[   54.580792] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[   54.580840] ACPI: Power Button [PWRF]
[   54.580870] initcall acpi_button_init+0x0/0x1000 [button] returned 0 after 633 usecs
[   56.679603] calling  i2c_vt596_init+0x0/0x1000 [i2c_viapro] @ 549
[   56.679752] initcall i2c_vt596_init+0x0/0x1000 [i2c_viapro] returned 0 after 134 usecs
[   56.753943] calling  acpi_video_init+0x0/0xff3 [video] @ 610
[   56.754385] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:0c/LNXVIDEO:00/input/input6
[   56.754516] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   56.754547] initcall acpi_video_init+0x0/0xff3 [video] returned 0 after 572 usecs
[   56.847247] calling  gameport_init+0x0/0x1000 [gameport] @ 550
[   56.847282] initcall gameport_init+0x0/0x1000 [gameport] returned 0 after 24 usecs
[   56.904901] calling  pci_hotplug_init+0x0/0x49 [pci_hotplug] @ 540
[   56.904909] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   56.904917] initcall pci_hotplug_init+0x0/0x49 [pci_hotplug] returned 0 after 4 usecs
[   56.919906] calling  shpcd_init+0x0/0x1000 [shpchp] @ 540
[   56.919994] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   56.920003] initcall shpcd_init+0x0/0x1000 [shpchp] returned 0 after 83 usecs
[   56.951931] systemd-uaccess[639]: Failed to determine active user on seat seat0.
[   57.442076] calling  alsa_card_via82xx_init+0x0/0x1000 [snd_via82xx_modem] @ 552
[   57.442308] VIA 82xx Modem 0000:00:11.6: power state changed by ACPI to D0
[   57.442317] VIA 82xx Modem 0000:00:11.6: power state changed by ACPI to D0
[   57.442325] VIA 82xx Modem 0000:00:11.6: enabling device (0000 -> 0001)
[   57.442398] ACPI: PCI Interrupt Link [ALKC] disabled and referenced, BIOS bug
[   57.442467] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
[   57.442471] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[   57.442498] VIA 82xx Modem 0000:00:11.6: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22
[   57.444062] VIA 82xx Modem 0000:00:11.6: setting latency timer to 64
[   57.555732] calling  pcspkr_init+0x0/0x1000 [pcspkr] @ 560
[   57.555851] input: PC Speaker as /devices/platform/pcspkr/input/input7
[   57.555998] initcall pcspkr_init+0x0/0x1000 [pcspkr] returned 0 after 247 usecs
[   57.952835] initcall alsa_card_via82xx_init+0x0/0x1000 [snd_via82xx_modem] returned 0 after 498765 usecs
[   57.969621] systemd-uaccess[687]: Failed to determine active user on seat seat0.
[   57.971952] systemd-uaccess[688]: Failed to determine active user on seat seat0.
[   57.977228] systemd-uaccess[689]: Failed to determine active user on seat seat0.
[   58.381972] calling  joydev_init+0x0/0x1000 [joydev] @ 567
[   58.381991] initcall joydev_init+0x0/0x1000 [joydev] returned 0 after 8 usecs
[   58.835670] calling  acpi_battery_init+0x0/0xfd0 [battery] @ 590
[   58.835688] initcall acpi_battery_init+0x0/0xfd0 [battery] returned 0 after 7 usecs
[   58.854405] calling  alsa_card_via82xx_init+0x0/0x1000 [snd_via82xx] @ 550
[   58.861305] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[   58.861319] ACPI: Battery Slot [BAT0] (battery present)
[   58.868088] VIA 82xx Audio 0000:00:11.5: power state changed by ACPI to D0
[   58.868105] VIA 82xx Audio 0000:00:11.5: power state changed by ACPI to D0
[   58.868113] VIA 82xx Audio 0000:00:11.5: enabling device (0000 -> 0001)
[   58.868132] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22
[   58.868198] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[   59.385014] initcall alsa_card_via82xx_init+0x0/0x1000 [snd_via82xx] returned 0 after 518158 usecs
[   59.402441] systemd-uaccess[701]: Failed to determine active user on seat seat0.
[   59.407857] systemd-uaccess[704]: Failed to determine active user on seat seat0.
[   59.413141] systemd-uaccess[700]: Failed to determine active user on seat seat0.
[   59.416806] systemd-uaccess[702]: Failed to determine active user on seat seat0.
[   59.421102] systemd-uaccess[705]: Failed to determine active user on seat seat0.
[   59.544992] calling  init_sg+0x0/0x1000 [sg] @ 616
[   59.545188] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   59.545247] scsi 3:0:0:0: Attached scsi generic sg1 type 5
[   59.545276] initcall init_sg+0x0/0x1000 [sg] returned 0 after 265 usecs
[   59.666327] calling  cdrom_init+0x0/0x1000 [cdrom] @ 617
[   59.666384] initcall cdrom_init+0x0/0x1000 [cdrom] returned 0 after 43 usecs
[   59.680302] calling  fw_core_init+0x0/0x1000 [firewire_core] @ 543
[   59.684932] initcall fw_core_init+0x0/0x1000 [firewire_core] returned 0 after 4493 usecs
[   59.701877] calling  mmc_init+0x0/0x1000 [mmc_core] @ 541
[   59.701950] initcall mmc_init+0x0/0x1000 [mmc_core] returned 0 after 54 usecs
[   59.903742] calling  fw_ohci_init+0x0/0x1000 [firewire_ohci] @ 543
[   59.903808] firewire_ohci 0000:00:0c.2: enabling device (0010 -> 0012)
[   59.903841] firewire_ohci 0000:00:0c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[   59.903857] firewire_ohci 0000:00:0c.2: setting latency timer to 64
[   59.916770] calling  init_sr+0x0/0x1000 [sr_mod] @ 617
[   59.920351] sr0: scsi3-mmc drive: 4x/24x writer cd/rw xa/form2 cdda tray
[   59.920358] cdrom: Uniform CD-ROM driver Revision: 3.20
[   59.920560] sr 3:0:0:0: Attached scsi CD-ROM sr0
[   59.920586] initcall init_sr+0x0/0x1000 [sr_mod] returned 0 after 3715 usecs
[   59.944276] systemd-uaccess[715]: Failed to determine active user on seat seat0.
[   59.956172] firewire_ohci: Added fw-ohci device 0000:00:0c.2, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[   59.956249] initcall fw_ohci_init+0x0/0x1000 [firewire_ohci] returned 0 after 51277 usecs
[   59.994316] systemd-uaccess[718]: Failed to determine active user on seat seat0.
[   60.060522] systemd-uaccess[722]: Failed to determine active user on seat seat0.
[   60.116511] calling  ssb_modinit+0x0/0x54 [ssb] @ 541
[   60.116598] b43-pci-bridge 0000:00:06.0: enabling device (0000 -> 0002)
[   60.116615] b43-pci-bridge 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   60.136135] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x0D, vendor 0x4243)
[   60.136146] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x09, vendor 0x4243)
[   60.136154] ssb: Core 2 found: PCI (cc 0x804, rev 0x0C, vendor 0x4243)
[   60.136161] ssb: Core 3 found: PCMCIA (cc 0x80D, rev 0x07, vendor 0x4243)
[   60.176119] ssb: Sonics Silicon Backplane found on PCI device 0000:00:06.0
[   60.176178] initcall ssb_modinit+0x0/0x54 [ssb] returned 0 after 58248 usecs
[   60.222775] calling  rfkill_init+0x0/0x7b [rfkill] @ 723
[   60.222962] initcall rfkill_init+0x0/0x7b [rfkill] returned 0 after 168 usecs
[   60.230193] calling  cfg80211_init+0x0/0xb9 [cfg80211] @ 723
[   60.230464] cfg80211: Calling CRDA to update world regulatory domain
[   60.242198] calling  videodev_init+0x0/0x1000 [videodev] @ 676
[   60.242205] Linux video capture interface: v2.00
[   60.242242] initcall videodev_init+0x0/0x1000 [videodev] returned 0 after 28 usecs
[   60.242329] initcall cfg80211_init+0x0/0xb9 [cfg80211] returned 0 after 11823 usecs
[   60.340730] cfg80211: World regulatory domain updated:
[   60.340739] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   60.340743] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   60.340748] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   60.340752] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   60.340756] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   60.340761] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   60.429969] calling  ieee80211_init+0x0/0x34 [mac80211] @ 723
[   60.430265] initcall ieee80211_init+0x0/0x34 [mac80211] returned 0 after 265 usecs
[   60.456249] firewire_core: created device fw0: GUID 0040ca0134703475, S400
[   60.531058] calling  viacam_init+0x0/0x10 [via_camera] @ 676
[   60.531103] viafb-camera viafb-camera: Unable to find GPIO lines
[   60.531306] viafb-camera: probe of viafb-camera failed with error -22
[   60.531330] initcall viacam_init+0x0/0x10 [via_camera] returned 0 after 251 usecs
[   60.557538] calling  b43_init+0x0/0x1000 [b43] @ 723
[   60.557622] b43-phy0: Broadcom 4318 WLAN found (core revision 9)
[   60.630402] calling  arc4_init+0x0/0x1000 [arc4] @ 733
[   60.631079] initcall arc4_init+0x0/0x1000 [arc4] returned 0 after 642 usecs
[   60.634734] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   60.635651] Registered led device: b43-phy0::tx
[   60.635682] Registered led device: b43-phy0::rx
[   60.635712] Registered led device: b43-phy0::radio
[   60.635739] Broadcom 43xx driver loaded [ Features: PMNLS, Firmware-ID: FW13 ]
[   60.635769] initcall b43_init+0x0/0x1000 [b43] returned 0 after 76350 usecs
[   60.739558] ifup[753]: Service network not started and mode 'auto' -> skipping
[   74.426524] Adding 1333356k swap on /dev/sda1.  Priority:0 extents:1 across:1333356k 
[   74.491549] systemd[1]: Cannot add dependency job for unit crypto.service, ignoring: Unit crypto.service is masked.
[   74.491678] systemd[1]: Cannot add dependency job for unit hwclock-load.service, ignoring: Unit hwclock-load.service failed to load: No such file or directory. See system logs and 'systemctl status hwclock-load.service' for details.
[   74.882950] calling  acpi_cpufreq_init+0x0/0xf53 [acpi_cpufreq] @ 859
[   74.882998] initcall acpi_cpufreq_init+0x0/0xf53 [acpi_cpufreq] returned -5 after 34 usecs
[   74.883004] initcall acpi_cpufreq_init+0x0/0xf53 [acpi_cpufreq] returned with error code -5 
[   74.934859] calling  powernowk8_init+0x0/0x179 [powernow_k8] @ 866
[   74.934873] initcall powernowk8_init+0x0/0x179 [powernow_k8] returned -19 after 2 usecs
[   74.957341] calling  microcode_init+0x0/0x12b [microcode] @ 869
[   74.957425] microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x20
[   74.980759] calling  powernow_init+0x0/0x1000 [powernow_k7] @ 873
[   74.980766] powernow: This module only works with AMD K7 CPUs
[   74.980773] initcall powernow_init+0x0/0x1000 [powernow_k7] returned -19 after 3 usecs
[   75.017982] calling  powernow_k6_init+0x0/0x1000 [powernow_k6] @ 876
[   75.017995] initcall powernow_k6_init+0x0/0x1000 [powernow_k6] returned -19 after 1 usecs
[   75.045050] calling  longrun_init+0x0/0x1000 [longrun] @ 880
[   75.045061] initcall longrun_init+0x0/0x1000 [longrun] returned -19 after 0 usecs
[   75.056903] calling  speedstep_init+0x0/0x1000 [speedstep_ich] @ 883
[   75.056915] initcall speedstep_init+0x0/0x1000 [speedstep_ich] returned -19 after 1 usecs
[   75.069161] rc.cpufreq[885]: CPU frequency scaling is not supported by your processor.
[   75.073078] rc.cpufreq[887]: boot with 'CPUFREQ=no' in to avoid this warning.
[   75.091129] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   75.091148] initcall microcode_init+0x0/0x12b [microcode] returned 0 after 130639 usecs
[   75.890684] ifup[1069]: lo
[   75.976817] ifup[1085]: lo
[   75.981210] ifup[1088]: IP address: 127.0.0.1/8
[   76.007672] ifup[1100]: IP address: 127.0.0.2/8
[   76.412106] ifup[1184]: eth0      device: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
[   76.997700] via-rhine 0000:00:12.0: eth0: link down
[   76.997936] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   77.018370] ifup-dhcp[1254]: eth0      Starting DHCP4 client
[   77.034944] dhcpcd[1256]: eth0: dhcpcd 3.2.3 starting
[   77.035435] dhcpcd[1256]: eth0: hardware address = 00:40:ca:d5:7d:47
[   77.043338] calling  packet_init+0x0/0x1000 [af_packet] @ 1260
[   77.043349] NET: Registered protocol family 17
[   77.043379] initcall packet_init+0x0/0x1000 [af_packet] returned 0 after 28 usecs
[   77.048621] dhcpcd[1256]: eth0: broadcasting for a lease
[   77.224686] ifup-dhcp[1282]: .
[   79.744229] ifup-dhcp[1390]: .
[   82.109756] ifup-dhcp[1496]: .
[   84.493563] ifup-dhcp[1602]: .
[   86.851940] ifup-dhcp[1710]: .
[   89.208849] ifup-dhcp[1816]: .
[   91.560401] ifup-dhcp[1922]: .
[   93.914290] ifup-dhcp[2028]: .
[   95.084856] ifup-dhcp[2083]: eth0      DHCP4 continues in background
[   95.276550] ifup[2137]: wlan0
[   95.280184] ifup[2139]: No configuration found for wlan0
[   95.507224] sshd[2180]: Server listening on 0.0.0.0 port 22.
[   95.509127] sshd[2180]: Server listening on :: port 22.
[   95.868802] systemd-logind[806]: New seat seat0.
[   95.981619] auditd[2271]: Started dispatcher: /sbin/audispd pid: 2273
[   95.984132] audispd[2273]: priority_boost_parser called with: 4
[   95.984712] audispd[2273]: max_restarts_parser called with: 10
[   95.986081] audispd[2273]: No plugins found, exiting
[   96.108299] auditd[2271]: Init complete, auditd 2.1.1 listening for events (startup state disable)
[   96.292326] smartd[2261]: smartd 5.40 2010-10-16 r3189 [i686-pc-linux-gnu] (SUSE RPM)
[   96.296353] smartd[2261]: Opened configuration file /etc/smartd.conf
[   96.301206] smartd[2261]: Drive: DEVICESCAN, implied '-a' Directive on line 26 of file /etc/smartd.conf
[   96.308854] smartd[2261]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
[   96.312259] sm-notify[2323]: Version 1.2.4 starting
[   96.338903] smartd[2261]: Device: /dev/sda, type changed from 'scsi' to 'sat'
[   96.339187] smartd[2261]: Device: /dev/sda [SAT], opened
[   96.344293] dbus[2203]: [system] Activating via systemd: service name='org.freedesktop.ConsoleKit' unit='console-kit-daemon.service'
[   96.348145] systemd[1]: Cannot add dependency job for unit crypto.service, ignoring: Unit crypto.service is masked.
[   96.348162] systemd[1]: Cannot add dependency job for unit hwclock-load.service, ignoring: Unit hwclock-load.service failed to load: No such file or directory. See system logs and 'systemctl status hwclock-load.service' for details.
[   96.388685] smartd[2261]: Device: /dev/sda [SAT], found in smartd database.
[   96.563026] dbus[2203]: [system] Activating service name='org.freedesktop.PolicyKit1' (using servicehelper)
[   96.640113] smartd[2261]: Device: /dev/sda [SAT], is SMART capable. Adding to "monitor" list.
[   96.641370] smartd[2261]: Device: /dev/sda [SAT], state read from /var/lib/smartmontools/smartd.SAMSUNG_HM040HI-S07WJ10Y710009.ata.state
[   96.641704] smartd[2261]: Monitoring 1 ATA and 0 SCSI devices
[   96.915782] smartd[2261]: Device: /dev/sda [SAT], state written to /var/lib/smartmontools/smartd.SAMSUNG_HM040HI-S07WJ10Y710009.ata.state
[   99.253481] calling  tun_init+0x0/0x1000 [tun] @ 2824
[   99.253489] tun: Universal TUN/TAP device driver, 1.6
[   99.253492] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   99.253653] initcall tun_init+0x0/0x1000 [tun] returned 0 after 154 usecs
[  110.091755] dbus[2203]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.NetworkManager.service': Unit dbus-org.freedesktop.NetworkManager.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.freedesktop.NetworkManager.service' for details.
[  110.092550] dbus[2203]: [system] Activating via systemd: service name='org.freedesktop.NetworkManager' unit='dbus-org.freedesktop.NetworkManager.service'
[  110.095816] dbus[2203]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.NetworkManager.service': Unit dbus-org.freedesktop.NetworkManager.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.freedesktop.NetworkManager.service' for details.
[  110.096440] dbus[2203]: [system] Activating via systemd: service name='org.freedesktop.NetworkManager' unit='dbus-org.freedesktop.NetworkManager.service'
[  110.096853] dbus[2203]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.NetworkManager.service': Unit dbus-org.freedesktop.NetworkManager.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.freedesktop.NetworkManager.service' for details.
[  120.153777] dbus[2203]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.NetworkManager.service': Unit dbus-org.freedesktop.NetworkManager.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.freedesktop.NetworkManager.service' for details.
[  120.157403] dbus[2203]: [system] Activating via systemd: service name='org.freedesktop.NetworkManager' unit='dbus-org.freedesktop.NetworkManager.service'
[  120.157840] dbus[2203]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.NetworkManager.service': Unit dbus-org.freedesktop.NetworkManager.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.freedesktop.NetworkManager.service' for details.
[  120.159028] dbus[2203]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.NetworkManager.service': Unit dbus-org.freedesktop.NetworkManager.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.freedesktop.NetworkManager.service' for details.
